Radiogenic isotopic dating and Lu–Hf isotopic composition using laser ablation-inductively coupled plasma-mass spectrometry(LA-ICP-MS)of the Wude basalt in Yunnan province from the Emeishan large igneous province(ELIP)yielded timing of formation and post-eruption tectonothermal event.Holistic lithogeochemistry and elements mapping of basaltic rocks were further reevaluated to provide insights into crustal contamination and formation of the ELIP.A zircon U–Pb age of 251.3±2.0 Ma of the Wude basalt recorded the youngest volcanic eruption event and was consistent with the age span of 251-263 Ma for the emplacement of the ELIP.Such zircons hadεHf(t)values ranging from7.3 to+2.2,identical to those of magmatic zircons from the intrusive rocks of the ELIP,suggesting that crust-mantle interaction occurred during magmatic emplacement,or crust-mantle mixing existed in the deep source region prior to deep melting.The apatite U–Pb age at 53.6±3.4 Ma recorded an early Eocene magmatic superimposition of a regional tectonothermal event,corresponding to the Indian–Eurasian plate collision.Negative Nb,Ta,Ti and P anomalies of the Emeishan basalt may reflect crustal contamination.The uneven Nb/La and Th/Ta values distribution throughout the ELIP supported a mantle plume model origin.Therefore,the ELIP was formed as a result of a mantle plume which was later superimposed by a regional tectonothermal event attributed to the Indian–Eurasian plate collision during early Eocene. 相似文献
The prediction of active earth pressure was generally implemented under the assumptions of two-dimensional conditions and cohesionless soils. However, in practice, the soils usually display a considerable level of cohesion, and the collapse of retained slopes exhibits a three-dimensional (3D) nature. Considering this fact, this paper intends to predict the 3D active earth pressure in cohesive soils based on the kinematic limit-analysis method and a 3D rotational collapse mechanism. The influence of cracks is considered, including a crack forming before the failure of retained soil masses (open crack) and a crack forming simultaneously with the failure (formation crack). The active earth pressure coefficient is estimated based on the work-energy balance principle. In order to facilitate direct application, several design charts are provided. It is shown that accounting for soil cohesion and 3D effects results in a notable decrease in the active earth pressure, whereas considering the existence of cracks would increase the pressure value. This paper develops the studies on active earth pressure, which considers the presence of cohesion, cracks, and 3D effects together for the first time. The results of this paper can offer references in designs of retaining structures for cohesive slopes.
Acta Geotechnica - One-dimensional compression tests on quartz sands treated by microbially induced carbonate precipitation (MICP) were carried out to evaluate the effects of gradation and calcium... 相似文献
Acta Geotechnica - Microbially induced carbonate precipitation (MICP) has been actively investigated as a promising method to improve soil properties. A burning issue impeding its wide application... 相似文献
Having a better understanding of air pollutants in railway systems is crucial to ensure a clean public transport. This study measured, for the first time in Brazil, nanoparticles (NPs) and black carbon (BC) on two ground-level platforms and inside trains of the Metropolitan Area of Porto Alegre (MAPA). An intense sampling campaign during thirteen consecutive months was carried out and the chemical composition of NPs was examined by advanced microscopy techniques. The results showed that highest concentrations of the pollutants occur in colder seasons and influenced by variables such as frequency of the trains and passenger densities. Also, internal and external sources of pollution at the stations were identified. The predominance of NPs enriched with metals that increase oxidative stress like Cd, Fe, Pb, Cr, Zn, Ni, V, Hg, Sn, and Ba both on the platforms and inside trains, including Fe-minerals as hematite and magnetite, represents a critical risk to the health of passengers and employees of the system. This interdisciplinary and multi-analytical study aims to provide an improved understanding of reported adverse health effects induced by railway system aerosols. 相似文献
The late Archean (~3.0–2.5 Ga) was a key period of continental growth globally, which is widely considered to reflect the onset of vigorous plate tectonic activity, although related continental growth modes remain contentious. Here we investigate a suite of late Neoarchean metavolcanic rocks from the southwest Qixia area of the Jiaobei terrane in the North China Craton. The rocks in this suite include amphibolites, clinopyroxene amphibolites, and hornblende plagioclase gneisses. We present zircon U-Pb isotopic data which indicate that the protoliths of these rocks formed during ~2549–2511 Ma.The (clinopyroxene) amphibolites correspond to meta-basaltic rocks, with some containing high modal content of titanite. These rocks show moderate to high FeOT (8.96–13.62 wt.%) and TiO2 (0.59–1.59 wt.%), flat to less fractionated REE patterns, and mildly negative Th, Nb, and Ta anomalies, resembling those of Fe-tholeiites. In addition, they display positive zircon ?Hf(t) values (+2.6 to +8.7), and are devoid of crustal contamination or fractional crystallization. Combined with the low Nb/Yb (mostly < 1.60) and (Hf/Sm)N (mostly < 0.95), low to moderate Th/Yb (0.08–0.54), and low V/Sc (5.53–9.19) ratios, these basaltic rocks are interpreted to have been derived from a relatively reduced and depleted mantle source that was mildly metasomatized by hydrous fluids. The hornblende plagioclase gneisses are meta-andesitic rocks, and occur interlayered with the basaltic rocks. They are transitional between tholeiitic and calc-alkaline rock series, and show fractionated REE patterns with evidently negative Th, Nb, and Ta anomalies. The depleted zircon ?Hf(t) values (+2.4 to +8.4) and quantitative chemical modeling suggest that the andesitic rocks were most likely generated by injection and mixing of juvenile felsic magmas with the tholeiitic basaltic magmas.In general, the chemical features and genesis of late Neoarchean meta-basaltic rocks in our study area resemble those of Mariana back-arc basin basalts. Combined with regional geological data, it is proposed that the Jiaobei terrane witnessed late Neoarchean crustal growth under a paired continental arc-back arc setting. On a regional context, we propose two distinct geodynamic mode of late Neoarchean continental growth across North China Craton (particularly the Eastern Block), i.e., (1) arc-continent accretion along northwestern part of the Eastern Block; and (2) paired continental arc-back arc system surrounding the ~3.8–2.7 Ga continental nuclei to the southeast. 相似文献
Hydraulic fracturing is an essential technology for the development of unconventional resources such as tight gas. The evaluation of the fracture performance and productivity is important for the design of fracturing operations. However, the traditional dimensionless fracture conductivity is too simple to be applied in real fracturing operations. In this work, we proposed a new model of dimensionless fracture conductivity (FCD), which considers the irregular fracture geometry, proppant position and concentration. It was based on the numerical study of the multistage hydraulic fracturing and production in a tight gas horizontal well of the North German Basin. A self-developed full 3D hydraulic fracturing model, FLAC3Dplus, was combined with a sensitive/reliability analysis and robust design optimization tool optiSLang and reservoir simulator TMVOCMP to achieve an automatic history matching as well as simulation of the gas production. With this tool chain, the four fracturing stages were history matched. The simulation results show that all four fractures have different geometry and proppant distribution, which is mainly due to different stress states and injection schedule. The position and concentration of the proppant play important roles for the later production, which is not considered in the traditional dimensionless fracture conductivity FCD. In comparison, the newly proposed formulation of FCD could predict the productivity more accurately and is better for the posttreatment evaluation.
Fine characterization of pore systems and heterogeneity of shale reservoirs are significant contents of shale gas reservoir physical property research.The research on micro-control factors of low productivity in the Qiongzhusi Formation(Fm.)is still controversial.The lower Cambrian Qiongzhusi Fm.in the Qujing,Yunnan was taken as the object to investigate the influence of mineral compositions on the phys-ical properties of the reservoir and the heterogeneity of shale,using the algorithm to improve the char-acterization ability of Atomic Force Microscopy(AFM).The results showed that:(1)The pores are mainly wedge-shaped pores and V-shaped pores.The pore diameter of the main pore segment ranges from 5 to 10 nm.Mesopores are mainly developed in the Qiongzhusi Fm.shale in Well QD1,with the average pore diameter of 6.08 nm.(2)Microscopic pore structure and shale surface properties show strong hetero-geneity,which complicates the micro-migration of shale gas and increases the difficulty of identifying high-quality reservoirs.(3)The increase of clay mineral content intensifies the compaction and then destroys the pores.Conversely,brittle minerals can protect pores.The support and protection of brittle minerals to pores space depend on their content,mechanical properties and diagenesis.(4)Compression damage to pores,large microscopic roughness and surface fluctuations and strong pore structure heterogeneity are the reasons for the poor gas storage capacity of the Qiongzhusi Fm.,which will lead to poor productivity in the Qiongzhusi Fm. 相似文献
Time-shift, one of the most popular time-lapse seismic attributes, has been widely used in dynamic reservoir characterization by linking it with pressure and geomechanical changes. Therefore, it is important to select appropriate calculation methods according to different time-lapse seismic data quality and time-shift magnitude. To date, there have been various published works comparing different time-shift calculation methods and discussing their advantages and disadvantages. However, most of these comparisons are based only on synthetic tests or single field applications. As the quality of time-lapse seismic data and time-shift magnitude can vary in different fields, one method may not work consistently well for each case. In this paper, a critical comparison of three different time-shift calculation techniques (Hale’s fast cross-correlation, Rickett’s non-linear inversion, and Whitcombe’s correlated leakage method) is provided. The three methods are applied to a set of synthetic data sets that are designed to account for various seismic noise and time-shift magnitudes. They are also applied to four real time-lapse seismic data sets from three North Sea fields. The calculated time-shift results are compared with the input (in synthetic tests) or the real observations from information such as seabed subsidence and compaction (in field applications). Both qualitative and quantitative comparisons are performed. At the end, each of the time-shift methods is evaluated based on different aspects, and the most appropriate method is suggested for each data scenario. All three time-shift methods are found to successfully measure time-shifts. However, Rickett’s non-linear inversion is the most outstanding method, as it gives smooth time-shifts with relatively good accuracy, and the derived time strains are more stable and interpretable.