略阳煎茶岭铜镍硫化物矿床Re—Os同位素年龄及其地质意义

采用矿石Re-Os同位素方法对陕西省煎茶岭硫化镍矿床矿石进行了成矿年代学研究,获得了878士27 Ma(1σ)的等时线年龄,首次厘定了该矿床成矿时代为新元古代,成岩成矿基本同时.通过对878 Ma硫化镍矿石初始Re-Os同位素体系的γOs计算和Re/Os值分析表明,其yOs和Re/Os值变化范围大,深部条带状矿石的Re/Os值仅为0.05,yOs为-6.70;块状矿石的Re/Os值范围为4.24～24.43,γOs为-15.37～+280.65,说明成矿过程中有壳源物质的混染;两件样品的γOs为负值(-15.37,-6.70),可能指示其超镁铁质岩浆来源于Re亏损地幔.煎茶岭超基性岩体年龄及其镍矿石的Re-Os等时线年龄与扬子克拉通北缘火山岩浆活动时间相对应,它们是扬子克拉通西北缘晋宁期构造岩浆成矿作用的产物.     

韧性剪切带的变形变质与同构造熔融作用——以中祁连地块宝库河韧性走滑剪切带为例

宝库河韧性剪切带是发育在中祁连地块北缘上的一条向北陡倾,走向近东西,宽约6 km的右行平移型韧性剪切带.剪切带内岩石原岩为泥质岩、基性岩和花岗岩,变质程度达角闪岩相,变形变质温度在685～763±46℃之间,压力在0.62～0.83±0.13 GPa范围内.其内长英质条带非常发育,规模变化较大,分布局部相对集中且受剪切带控制,走向与剪切带一致,平行于叶理,孤立无根,并在后期递进变形过程中发生不同程度的糜棱岩化、布丁化和褶皱,主要成分为长石和石英,明显不同于韧性剪切前或后侵入的花岗岩脉或岩体.长英质条带特征、REE配分模式及剪切带内岩石的变形变质温度说明剪切带内发育的长英质条带与基体是同源的,是在剪切应变过程中剪切热使围岩内部分物质发生动态熔融形成的,是同构造熔融作用的产物.     

东南极格罗夫山泛非期麻粒岩相变质作用

东南极格罗夫山主要由麻粒岩相高级变质岩和花岗岩类组成，其中变质岩以浅色和暗色含斜方辉石长英质片麻岩占主导地位，夹有少量镁铁质麻粒岩、变沉积岩和含方柱石钙硅酸盐岩。这些岩石一般都展示了平衡的矿物共生结构，但在镁铁质麻粒岩的单斜辉石中普遍发育斜方辉石(易变辉石)的出溶片晶。根据出溶辉石的重组分析获得麻粒岩相变质作用的峰期温度约为850℃，而浅色片麻岩中的石榴子石—斜方辉石—斜长石—石英组合给出的变质压力为0．61～0．67GPa。镁铁质麻粒岩中火成亚钙质普通辉石斑晶的保存表明格罗夫山地区可能只发育单一的泛非期高温麻粒岩相变质事件，岩石在高温变质之后经历了缓慢冷却过程，这主要归因于花岗质岩浆的板底垫托作用。     

论层序地层学与含油气系统在油气勘探中的联系——以鄂尔多斯中生代盆地为例

虽然层序地层学与含油气系统理论的各自研究对象和研究方法不同，但由于层序地层学研究对象(沉积岩)是含油气系统研究对象(油气)的载体，二者可以由含油气盆地分析有机的结合起来。层序地层分析包含了对含油气系统的地质要素及成藏作用载体的分析，因而沉积层序的组成单元与含油气系统的地质要素有必然的联系：在一个沉积盆地的数个沉积层序中，成熟烃源岩往往是地史中具一定埋深、分布广、厚度大、有机质含量高的凝缩层，这个凝缩层往往是一个构造超层序的最大海(湖)泛面；储集岩往往是成熟烃源岩之上层序的低水位体系域或紧邻成熟烃源岩的高水位体系域；有效盖层为储集岩之上层序的水进体系域及凝缩层；成熟烃源岩之上的沉积层序为上覆岩层；低水位体系域储集岩有可能沿上倾方向尖灭，被层序界面及其上层序的水进体系域岩性圈闭；除构造裂缝外，低水位体系域下切谷可作为油气向上运移通道；一个含油气系统往往跨越不同的沉积层序甚至构造超层序。     

燕山地区中元古代常州沟组潜穴化石

在燕山地区中元古代常州沟组中发育有大量的潜穴化石，潜穴产于常州沟组中部的泥质粉砂岩中。潜穴呈个体较大的直管状，垂直层面保存。这是我国迄今为止发现的最古老的遗迹化石，表明在距今近1800Ma前就已出现古老的后生动物，这对于研究后生动物的起源及演化具有重要意义。     

攀西裂谷存在吗？

大陆裂谷以地幔上隆、岩石圈伸展、减薄、断陷和沉降为特征，伸展构造环境是大陆裂谷形成的必要条件和本质特征。中国学者以前所认为攀枝花-西昌裂谷的主要标志是海西期层状堆晶杂岩、晚二叠世峨眉山玄武岩、印支期环状碱性杂岩和晚三叠世裂谷盆地沉积。最近一系列研究成果表明攀西地区海西期-印支期构造岩浆热事件是地幔柱和岩石圈相互作用的结果，不是裂谷作用的产物。进一步对上扬子西缘二叠纪-三叠纪的沉积作用和构造特征综合分析表明攀西地区不存在裂谷盆地沉积。该区晚二叠世-中三叠世为古陆隆起遭受剥蚀，晚三叠世断陷型类磨拉石建造是前陆走滑复合盆地的产物。本文根据对攀西地区二叠纪-三叠纪的岩浆活动、沉积作用、构造特征和地球物理资料等方面综合研究对攀西裂谷的存在提出质疑，并以峨眉山地幔柱活动为主线探讨了攀西地区古生代和中生代的地质构造演化历史。     

0．7Ma以来的念青唐古拉山脉隆升过程——来自冰川剥蚀作用的证据

通过对念青唐古拉山冰碛地层划分及冰碛物同位素测年，发现最早一期冰碛物形成于0．7～0．6MaBP，指示自中更新世以来念青唐古拉山脉开始隆升，主峰地区发生了大规模的冰川剥蚀作用，形成了大面积分布的冰碛高平台；0．2～0．14MaBP念青唐古拉山又快速隆升，并堆积了刚刚伸出各大沟谷口的高侧碛；0．07～0．03MaBP念青唐古拉山再次小规模隆起，形成各大沟谷内的侧碛和终碛垄；0．01Ma BP还有小规模冰川活动。念青唐古拉山主峰地区的冰川剥蚀作用反映出的山脉隆升过程，可较好地与青藏高原的隆起过程相对比，它应是青藏高原隆升的响应。     

GPS导航技术在伊拉克战争中的应用

论述了GPS导航定位技术在伊拉克战争中的作用，着重分析了GPS在精确制导武器中的应用形式和效果，并预测了美国在GPS应用方面未来将要进行的努力。     

A Further Study on the Mechanism of Airdecking

Airdecking is used in mining for two quite different applications. One is to enhance the fragmentation by amplifying the induced fracturing and the second is for pre-split blasting in which the borehole fracturing is reduced. This paper deals with the first of these effects. A forth coming paper will describe pre-splitting by airdecking. The use of air decks to enhance rock fragmentation and so to reduce explosive costs has been the practice for quite long time. Although a number of studies has been conducted to verify the advantages of blasting with air decks and to investigate the mechanisms involved, the proposed mechanisms still cannot explain clearly the phenomena observed in practice and the design approach adopted for this kind of blasting is still primary based on rules-of-thumb. In this paper, the theory of shock tubes is adopted to (a) investigate the processes of the expanding detonation products, (b) study the interactions between the explosion products and the stemming or bottom of blasthole, and (c) to decide the distribution of the changing pressure of explosion products along blasthole. Numerical simulation and theoretical analyses are then performed to study the physical process of blasting with air decks. Finally, a reasonable value for the airdecking ratio is decided theoretically. It is shown that the pressure-unloading process caused by the propagation of the rarefaction wave and the reflected rarefaction waves in the detonation products plays an important role in the enhanced fragmentation of rock when blasting with air decks. The unloading process can induce tensile stresses of rather high magnitude in the rock mass surrounding blasthole. This favors fracturing of the rock. The reflected shock wave with a magnitude of gas pressure higher than that of the average detonation pressure in a fully charged blasthole acts as the main energy source to break the rock in the air deck and stemming portions. The second and succeeding strain waves induced by the unloading or reloading of the pressurewithin the blasthole also contribute to form the initial fracture network in the rock around the blasthole. It is also revealed that there exists a reasonable range of values for the airdecking ratio. For ANFO, this value varies from 0.13-0.40.     

Process of Housing Damage Assessment: The 1995 Hanshin-Awaji Earthquake Disaster Case

Rebuilding of victims' livelihoods was a crucial issue in the restoration process in the1995 Hanshin-Awaji Earthquake Disaster. Housing damage assessment influencedmost of the rebuilding of the livelihood in the long term, because the Victim Certificatesissued by the local governments based on the results of the Housing damage assessmentwas required to receive most of the individual assistance measures. In the process ofHousing damage assessment, many complex problems arose, leading to extensivework on the part of the disaster responders. Consequently, a considerable number ofvictims were dissatisfied with the assessment and applied for a resurvey. Due to a floodof requests for resurvey, disaster responders had to work on damage assessment, leavingrelief activities aside.In order to facilitate Housing damage assessment, this paper discusses thefollowing five points: (1) the processes and the problems of assessments performedin the Hanshin-Awaji Earthquake Disaster, (2) the changes in the nature of informationneeded by the victims, (3) the improvements over the present damage assessment, (4)the housing situation in Japan, and (5) the international situation on damage assessment.It is obvious from the results that a poor damage assessment system and the size ofthe disaster produced a very large work load. Differences in appreciation among theinvestigators also contributed to unfair assessments and led to the victims beingincreasingly dissatisfied by the survey results. Finally, a design concept for acomprehensive damage assessment system, which has been derived from theabove five points, is proposed for post-disaster management.