Geological evolution of the Dongsha Uplift and its surrounding depressions in the South China Sea

-The tectonic types of the Zhujiang (Pearl) River Mouth Basin in the South China Sea are epicontinental rift-depression basins. Prior to Early Cretaceous time, the Dongsha Uplift arid its surrounding depressions had been combined with the Eurasia Plate in a single unit. Many ENE-trending narrow rifted basins were formed in the third episode of Yanshan orogeny (Late Laramide). The rifted basins in the Paleocene and Eocene were stretched and extended, forming Zhu 1, Zhu 2 and Zhu 3 depressions. The Dongsha Uplift is located between Zhu 1 and Zhu 2 depressions . covering an area of 28 000 Km2. Its geologic evolution can be divided into four stages:(1) Late Cretaceous - Paleocene block-faulting stage.(2) Eocene -Oligocene uplifting and eroding stage.(3) Late Oligocene - Early Miocene sustained subsiding stage.(4) Middle Miocene -Recent noncompensated subsiding stage.The Dongsha Uplift is a structural zone favourable for oil-gas accumulation.     

赤潮叉角藻18SrDNA和ITS区序列测定与分析

采用PCR及克隆测序的方法，对1998年引发渤海赤潮的叉角藻18SrRNAadldey DNAITS区（Internal Transcribed Spacer Regions)进行了序列测定与分析。并通过因特网从国际分子生物学数据库中获取甲藻另外15个种的18rDNA序列，以Tetrahymena corlissi作为类群，分别采用Neighbor-Joining和Fitch方法构建甲藻较为一致和可靠的进化树图，探讨具有高度多样性和在分类上争议较多的甲藻各类群之间的形态与分子进化关系。结果表明，Prorocentrum(有2个简单的壳板）出现得较早，而大多数多甲藻目（覆盖着多个壳板）、裸甲藻目（大多数不具壳板）和膝沟藻目的成员较晚出现。另外，对叉角藻ITS区的分析表明，ITS区为高变区，是良好的分子标记，可用于叉角藻快速鉴定的专一性核酸分子探针的研制。     

应用六氯化苯测年法对厦门港现代沉积速率的测定

岩芯柱样用静力岩芯采样器于1986年采自福建省厦门港一九龙江口海域。通过对这些岩芯柱样中六氯化苯(BHC)的垂直分布状况和生物扰动类型的分析,应用 S_R=D_(BHC-D_(mix)/Y的计算模式,获得了这些岩芯的现代沉积速率数据。将这些数据、方法与原理完全不同的~(210)Pb放射性同位素测年法同岩芯测年数据比较,其结果在数据和数量级上有一定可比性。初步认为,再经进一步探索和改进,BHC测年法有可能应用于近岸河口港湾几十年来现代沉积速率的测定而与其它测年法互为补充。     

Calculation of Environmental Capacity of Petroleum Hydrocarbon in Jiaozhou Bay

The method has been established to calculate the environmental capacity (ECo),surplus environment capacity (SECo) of water with respect to marine petroleum hydrocarbons associated with oil (PHAOs) and the self-purification capacity (SPCo) of main self-purification process to PHAOs in the Jiaozhou Bay, China, according to the dynamic model for distribution of marine PHAOs among multiphase environments. The variation of concentration of PHAOs in the Jiaozhou Bay is well simulated by the dynamic model. Based on the model.the ECo, SECo of water with respect to PHAOs in the Jiaozhou Bay were calculated during the last 10 years under the first-class and second-class quality standard requirement, according to SPCoof main self-purification process to PHAOs. The results show that about 200 tons of PHAOs could be discharged into the Jiaozhou Bay for maintaining the first class seawater quality standard, and about 600 tons of PHAOs for the second class seawater quality standard later.     

沿海新建混凝土建筑的耐久性

分析了沿海混凝土建筑因耐久性不足而导致破坏的原因，提出了预防措施。     

太平洋三海区热液烟囱物的氧同位素特征及形成温度

使用氧同位素方法 ,测试了西太平洋马里亚纳岛弧、马里亚纳海槽、冲绳海槽和东太平洋加拉帕戈斯裂谷的海底热液烟囱和硫化物全岩样品。结果表明 :马里亚纳岛弧上的埃斯梅拉尔达破火山口的热液硫化物的形成温度最高 (达 2 75℃ ) ,而成为高温产物的代表 ;冲绳海槽和加拉帕戈斯裂谷烟囱 ,表现为中高温类型 ,其氧同位素温度在 1 5 0℃左右 ;马里亚纳海槽以蛋白石为主要矿物的烟囱物 ,则显示出典型的低温热液类型 ,少量黄铁矿砂试样则表现出中温类型特征。但上述区域大都不同程度地存在有闪锌矿、黄铁矿、黄铜矿等中高温热液矿物 ,说明研究区除马里亚纳海槽明显有中低温热液活动类型外 ,其它区域皆具备中高温热液活动特征     

台湾海峡及其邻近海域中华哲水蚤的分布和繁殖

中华哲水蚤(Calanus sinicus Brodsky)是我国近海的优势桡足类。它的数量大，分布广。特别在冬、春季，在我国近海浮游动物中，占有相当大的比例；同时它的个体也较大，是滤食性种类。因其在海洋生态系统的物质循环和能量流动中，起着相当的作用，所以被国家自然科学基金重大项目-“东、黄海生态系统动力学与生物资源可持续利用”课题定为浮游动物的关键种之一。 作者根据以往历史资料(方金钏，1979；朱长寿，1997；朱长寿等，1991、1999；林玉辉等，1988；林元烧等，1984；李少菁，1963；陈清潮，1964；福建省海岸带和海凃综合调查领导小组，1990；福建海洋研究所，1988；Tan，1970)和多年来的研究结果(黄加祺等，1984，1986a、b、c，1989，1991a、b，1997a、b)，对中华哲水蚤在不同水域的分布，与温、盐度关系及繁殖进行了探讨，并提出见解，为本项目子课题提供了历史资料。     

南海西沙西南海域表层沉积物特征

西沙西南海域表层沉积物样品矿物成分，地球化学，微体古生物分析测试结果表明：沉积物可分为７种类型，沉积环境主要是陆坡，部分为深海平原，海洋生物，海洋化学以及火山物质的沉积起到了积极的作用，陆源物质的影响较小，它们主要来源于北部大陆和南部岛礁等物源区。     

福建红树林上钻孔动物的生态

福建红树林上的钻孔动物共发现了５种，其中软体动物的龙骨节铠船蛆Ｂａｎｋｉａ ｃａｒｉｎａｔａ、裂铠船蛆Ｔｅｒｅｄｏ ｍａｎｎｉ和甲壳动物的光背团水虱Ｓｐｈａｅｒｏｍａ ｒｅｔｒｏｌａｅｖｉｓ是破坏红树林的主要的钻孔动物。钻孔动物钻凿红树茎的基部和裸露的根部，垂直分布受潮汐水位制约，在红树林区的纵深分布与水流畅通程度有关。     

A hierarchical real-time control architecture for a semi-autonomous underwater vehicle

This paper describes a real-time control architecture for Dual Use Semi-Autonomous Underwater Vehicle (DUSAUV), which has been developed at Korea Research Institute of Ships and Ocean Engineering (KRISO) for being a test-bed of development of underwater navigation and manipulator technologies. DUSAUV has three built-in computers, seven thrusters for six DOF motion control, one 4-function electric manipulator, one ballasting motor, built-in power source, and various sensors. A supervisor control system with GUI and a multi-purpose joystick is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers for real-time control purpose, while Microsoft OS product is ported in the supervisor computer for GUI programming convenience. A hierarchical control architecture, which consists of application layer, real-time layer and physical layer, has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in an ocean engineering basin of KRISO is also presented.