北秦岭丹凤地区产铀花岗岩稀土元素地球化学特征

针对北秦岭丹凤地区产铀花岗岩的区域地层、赋矿围岩、蚀变岩和铀矿石进行稀土元素地球化学研究,结果表明:各类样品具有大体类似的LREE富集及Eu负异常的稀土配分模式,表明它们之间稀土元素特征具有继承性;赋矿黑云母二长花岗岩与区域地层(丹凤岩群变质基性火山岩)稀土元素特征指示,二者均形成于岛弧环境;蚀变花岗岩和铀矿石主要继承了赋矿花岗岩的特征。各类样品Y/Ho值变化范围狭窄,为25.09~33.46,显示它们具有共同的源区。铀矿石具有最高的w_B(∑HREE),且与铀矿石的品位存在正相关关系,暗示HREE与铀的迁移具有同步性。     

耕作措施对陕西耕作土壤碳储量的影响模拟*

鉴于农业生态系统土壤有机碳(SOC)平衡对中国农业可持续发展的重要性,文章以陕西农业生态系统为对象,整合农业生物地球化学模型(DNDC)与陕西农业地理信息系统数据库,利用陕西地区气象和作物资料,对陕西省2000年作物生长发育和土壤碳循环进行了模型模拟,实例探讨了耕作管理对土壤碳储量的影响,并由此评价生物地球化学模型在气候变化、土壤性质及农业耕作管理措施对土壤碳含量影响方面的预测能力。敏感性分析表明土壤性状,尤其是初始有机碳含量是影响模型区域尺度模拟的最主要敏感因素。区域模拟使用灵敏系数分析法,分别采用敏感因子的最大、最小值驱动模型在每一模拟单元内的运算,以产生一个土壤有机碳变化的范围值,土壤有机碳变化的真实值应以较大机率包含在这一范围内。分析模拟结果可以得出3点结论: 1)2000年陕西耕作土壤总有机碳储量约为103TgC,是一个大气CO₂源,向大气释放碳0.5TgC; 2)提高作物秸秆还田率是提高陕西农田碳库储量的有效可行措施,将作物秸秆还田率从当前的15 ％ 提高到50 ％ 或90 ％ 会使陕西农田土壤从大气CO₂源转变为汇,每年分别增加土壤有机碳库储量0.7TgC或2.1TgC; 3)施用有机农肥(500kg/hm²)也会增加土壤碳输入,从而提高土壤碳储量,使陕西农田系统转变为较弱的碳(C)源,每年可多固定0.2TgC。     

Biostratigraphy and seismic data analysis to detect the sequence stratigraphic depositional environment of the Miocene succession: Gulf of Suez (Egypt)

This work comprises a study of the sequence stratigraphy, seismic-facies analysis, biostratigraphy and depositional environments of the northern part of the Gulf of Suez, Egypt, using a set of 24 3D seismic profiles, composite logs and sonic logs from ten wells. The syn-rift formations in the studied ten wells are described lithologically and interpreted based on investigating two seismic profiles. Biostratigraphically, the Miocene fossils are identified to correlate the five planktonic foraminiferal biozones in the examined boreholes (RB-A1, RB-B1, RB-B3, EE85-2 and RB-C1). The sequence stratigraphic analysis suggests that the Miocene succession can be subdivided into two major third order depositional sequences (S1 and S2) separated by the three major sequence boundaries (DSB1, DSB2 and DSB3).     

Carbon and oxygen isotopic constraints on paleoclimate and paleoelevation of the southwestern Qaidam basin,northern Tibetan Plateau

We investigate the growth of the northern Tibetan Plateau and associated climate change by applying oxygen and carbon isotopic compositions in Cenozoic strata in the southwestern Qaidam basin. The X-ray diffraction and isotopic studies reveal that the carbonate minerals are mainly authigenic and they do not preserve any evidence for detrital carbonate and diagenesis. The isotope data show large fluctuations in the δ¹⁸O and δ¹³C values in the middle–late Eocene, indicating relatively warm and seasonal dry climate. The positive correlation of the δ¹⁸O and δ¹³C values in the Oligocene and the positive shift of the δ¹³C values from the Eocene to Oligocene suggest that the climate changed to arid in the Oligocene. However, the δ¹⁸O values show negative shift, which is closely related to the global cooling event. During the Miocene, the δ¹³C values vary between –2‰ and –4‰, whereas the δ¹⁸O values show continuous negative shift. The mean δ¹⁸O values decrease from –8.5‰ in the early Miocene to –10.0‰ in the late Miocene. The stable isotope-based paleoaltimetry results suggest that the elevation of the southwestern Qaidam basin was approximately 1500 m in the middle–late Eocene and Oligocene. Subsequently, during Miocene the crustal uplift process started and the elevation reached approximately 2000 m in the early Miocene and 2500 m in the late Miocene, which suggests large-scale growth of the northern Tibet Plateau during the Miocene.     

New equations for predicting the field penetration index of tunnel boring machines in fractured rock mass

The Queens Water Tunnel No. 3, stage 2 having 7.5-km length and 7-m diameter, is excavated by a high-power tunnel boring machine (TBM) underneath Brooklyn and Queens area for distributing freshwater throughout the New York City, USA. This paper offers a review of the project by considering the TBM performance and rock mass interaction. Using the individual cutter force, intact, and mass rock properties, TBM performance by means of field penetration index (FPI) was predicted and compared with actual results obtained in the field. Further, the study involves statistical analysis of the laboratory and field data including machine, intact, and mass rock properties to develop new empirical equations to estimate FPI. It is stated that the FPI, also converted to the rate of penetration, could be estimated utilizing intact and mass rock properties together with cutter force for similar type of rocks with correlation coefficient of 0.88.     

Tunisian landfill leachate treatment using <Emphasis Type="Italic">Chlorella</Emphasis> sp.: effective factors and microalgae strain performance

The potential of the autoclaved Tunisian landfill leachate treatment using microalgae (Chlorella sp.) cultivation was investigated in this study. Landfill leachate was collected from Borj Chakir landfill, Tunisia. A full factorial experimental design 2² was proposed to study the effects of the incubation time and leachate ratio factors on the organic matter removal expressed in chemical oxygen demand (COD) and ammoniacal nitrogen (NH₄─N) and on the biological response of Chlorella sp. expressed by the cell density and chlorophyll content. All experiments were batch runs at ambient temperature (25 ± 2 °C). The Chlorella sp. biomass and chlorophyll a concentrations of 1.2 and 5.32 mg L^?1, respectively, were obtained with 10% leachate spike ratio. The obtained results showed that up to 90% of the ammoniacal nitrogen in landfill leachate was removed in 10% leachate ratio spiked medium with a residual concentration of 40 mg L^?1. The maximum COD removal rate reached 60% within 13 days of incubation time indicating that microalgae consortium was quite effective for treating landfill leachate organic contaminants. Furthermore, with the 10% leachate ratio spiked medium, the maximum lipid productivity was 4.74 mg L^?1 d^?1. The present study provides valuable information for potential adaptation of microalgae culture and its contribution for the treatment of Tunisian landfill leachate.     

Dissolution sequestration mechanism of CO<Subscript>2</Subscript> at the Shiqianfeng saline aquifer in the Ordos Basin,northwestern China

This study focused on the target injection layers of deep saline aquifers in the Shiqianfeng Fm. in the Carbon Capture and Sequestration (CCS) Demonstration Projects in the Ordos Basin, northwestern China. The study employed a combination method of experiments and numerical simulation to investigate the dissolution mechanism and impact factors of CO₂ in these saline aquifers. The results showed (1) CO₂ solubility in different types of water chemistry were shown in ascending order: MgCl₂-type water < CaCl₂-type water < Na₂SO₄-type water < NaCl-type water < Na₂CO₃-type water < distilled water. These results were consistent with the calculated results undertaken by TOUGHREACT with about 5% margin of error. CO₂ solubility of Shiqianfeng Fm. saline was 1.05 mol/L; (2) compared with distilled water, the more complex the water’s chemical composition, the greater the increase in HCO₃ ^?concentration. While the water’s composition was relatively simple, the tested water’s HCO₃ ^?concentrations were in close accord with the calculated value undertaken by the TOUGHREACT code, and the more complex the water’s composition, the poorer the agreement was, probably due to the complex and unstable HCO₃ ^? complicating matters when in an aqueous solution system including both tested HCO₃ ^?concentration and calculated HCO₃ ^?concentration; (3) the CO₂ solubility in the saline at the temperature conditions of 55 °C and 70 °C were 1.17 and 1.02 mol/L. When compared with the calculated value of 1.20 and 1.05 mol/L, they were almost the same with only 1 and 3% margin of error; concentrations of HCO₃ ^? were 402.73 mg/L (0.007 mol/L) and 385.65 mg/L (0.006 mol/L), while the simulation results were 132.16 mg/L (0.002 mol/L) and 128.52 mg/L (0.002 mol/L). From the contrast between the tested data and the calculated data undertaken by the TOUGHREACT code, it was shown that TOUGHRACT code could better simulate the interaction between saline and CO₂ in the dissolution sequestration capacity. Therefore, TOUGHREACT code could be used for the inter-process prediction of CO₂ long-term geological storage of CO₂; (4) The Ca²⁺ concentration and SO₄ ^2?concentration in saline water had less effect on the solubility of CO₂ and HCO₃ ^?concentration. In addition, TDS and pH values of saline affected not only the solubility of CO₂, but also the conversion of CO₂ to HCO₃ ^? due to that they can affect the activity and acid-base balance. So in fact, we just need to consider that the TDS and pH values are main impact factors in the dissolution sequestration capacity of CO₂ geological sequestration in deep saline aquifers.     

Application of a 3D photorealistic model for the geological analysis of the Permian carbonates (Khuff Formation) in Saudi Arabia

Three dimensional (3D) photorealistic models of geological outcrops have the potential to enhance the teaching of earth sciences by providing scale models in a virtual reality environment. These models can be run on low-cost desktop computers. Photorealistic models for geological outcrops are a digital illustration of outcrop photographs with either a point cloud representation or Triangular Irregular Network (TIN) mesh of the outcrop surface. The level of detail for these models is dependent on the target resolutions (physical and optical) that were used during data acquisition. In addition, the technique in which the data is rendered as a digital model affects the level of detail that can be observed by the geologists. A colored point cloud representation is suitable for large-scale features, but fine details are lost when the geologist zooms in to view the model close up. In contrast, a photorealistic model that is constructed from photographs draped onto a triangle mesh surface derived from Light Detection and Ranging (LiDAR) point clouds provides a level of detail that is restricted only by the resolution of the photographs.     

Estimating geometrical parameters of cylindrical targets detected by ground-penetrating radar using template matching algorithm

In the current research, the ground-penetrating radar (GPR) method has been employed to identify physical and geometrical parameters of buried cylindrical structures using the pattern recognition approach. To achieve this goal, the well-established mathematical relationships between geometrical parameters of cylindrical target (radius, burial depth, and horizontal location) and the associated GPR hyperbolic response characteristics are employed using the template matching method. In order to validate the applicability of the template matching method in providing estimates of such parameters, the method is first examined on GPR responses of synthetic models with known geometrical parameters followed by applying on real data using two different similarity criteria including 2-D spatial convolution and normalized cross correlation in the wave number domain. In the first step, the GPR responses of 71 synthetic models encompassing one, two, and three horizontal cylinders were produced using the improved 2-D finite difference in frequency domain. Then, appropriate preprocessing sequences to reduce random noise caused by forward modeling were applied on synthetic data. The proposed algorithm applied on several synthetic model responses could estimate the known geometrical parameters of the buried cylinders with acceptable accuracy (maximum error of 15%). The template matching algorithm was also used to extract geometrical parameters of water and wastewater pipes buried in Imam Hossein Square, Isfahan city, as real GPR data. Depending on environmental conditions and subsurface host formation, the real GPR data normally contain a variety of noises; therefore, a series of appropriate objective preprocessing and processing stages were designed in order to apply on real GPR images before deploying template matching algorithm. The applicability of the template matching algorithm on real data and validity of the estimated parameters were proved based on assessing the accuracy of the estimated geometrical parameters of respective pipes through GPR response versus the measured parameters. The proposed algorithm was designed in such a way that all steps of estimating geometrical parameters of buried cylindrical targets are automatically carried out.     

Impact of rock-water interactions and recharge on water resources quality of the Agadir-Essaouira basin,southwestern Morocco

The Agadir-Essaouira area in the occidental High Atlas Mountains of Morocco is characterized by a semi-arid climate. The scarcity and quality of water resources, exacerbated by long drought periods, constitute a major problem for a sustainable development of this region. Groundwater resources of carbonate units within Jurassic and Cretaceous aquifers are requested for drinking and irrigation purposes. In this study, we collected 84 samples from wells, boreholes, springs, and rivers. Hydrochemical and isotopic data were used to examine the mineralization and origin of water, which control groundwater quality. The chemical composition of water seems to be controlled by water-rock interactions, such as dissolution of carbonates (calcite and dolomite), weathering of gypsum, as well as ion exchange processes, which explain the observed variability. Stable isotopes results show that groundwater from the mainly marly Cretaceous aquifer are submitted to an evaporation effect, while samples from the chiefly calcareous Jurassic aquifer indicate a meteoric origin, due to a rapid infiltration of recharge runoff through the karstic outcrops. The low values of δ¹⁸O and δ²H suggest a local recharge from areas with elevations ranging from 400 to 1200 m for the Cretaceous aquifer and from 800 to 1500 m for the Jurassic units.