内蒙古敖包吐萤石矿床的Sr、Nd、Pb同位素地球化学特征

敖包吐萤石矿床是内蒙古北部苏莫查干地区单一萤石矿集区中的一个代表性矿床,产于早二叠世大石寨组火山-沉积岩与早白垩世敖包吐花岗岩的接触带上。文章通过分析该矿床岩、矿石的微量元素和稀土元素,揭示出萤石的成矿作用可分为2个阶段,即交代作用和充填作用。交代作用过程中大石寨组的结晶灰岩可能为萤石的形成提供了部分Ca来源,萤石矿石的稀土元素配分模式与海水基本类似,具有Ce负异常;成矿作用后期主要表现为充填作用,形成颗粒粗大的萤石,表现为重稀土元素富集的特征,并随着萤石的沉淀析出,稀土元素总量逐渐下降,反映出成矿流体经历了较长期的演化过程。各地层单元、花岗岩体和萤石矿石的Sr、Nd、Pb同位素研究表明,萤石的放射性同位素组成具有壳、幔源混合的特点,成矿物质来源具有多源性。早白垩世敖包吐花岗岩可能是萤石中F的主要来源,而大石寨组的结晶灰岩则可能提供了Ca。另外,Pb、Nd同位素的极大不均一性,有可能是成矿流体在运移过程中对艾力格庙群放射性组分的选择性吸收的结果。萤石成矿作用与钾玄岩的时空关系暗示了萤石的成矿过程可能是中国东部岩石圈减薄和下地壳的置换地质事件的结果。在构造转型的过程中,燕山中期富碱的酸性花岗岩浆的活动分异出富含F的成矿流体,与幔源流体混合,沿区域重新活化的深大断裂和大石寨组的层间破碎带上升,交代其间的灰岩透镜体,从而形成敖包吐中型萤石矿床。     

Case history of controlling a landslide at Panluo open-pit mine in China

Controlling of landsides safely and economically is a great challenge to mine operators because landslides are major geological problems especially in open-pit mines. In this paper, a case history at Panluo open-pit mine is presented in detail to share the experiences and lessons with mine operators. Panluo open-pit mine is located in the southwestern Fujian province of China. It is the largest open-pit iron mine in the Fujian province and was planned in 1965 and is in full operation from 1978. In July 1990, an earthquake of magnitude 5.3 in Taiwan Strait and big rainstorms impacted the mine slope, causing tension cracks and rather large-scale failures, and forming a U-shaped landslide. Total potential volume was estimated to be up to 1.0 × 10⁶ m³. This directly threatened the mine production. In order to protect the mine production and the dwellers’ safety around, a dynamic comprehensive method was implemented including geotechnical investigations, in-situ testing and monitoring, stability analysis, and many mitigation and preventive measures. These measures slowed down the development and further occurrence of the landslide. The results showed that the landslides were still active, it was slowed with the control measures and moved rapidly with rainfall and mining down. However, no catastrophic accidents occurred and the pit mining was continued till it was closed at the elevation of 887 m in 2000. As a successful case of landslide control at an open-pit mine for 10 years, this paper reports the controlling measures in details. These experiences of landslide control may be beneficial to other similar mines for landslide control.     

Shear strength characterization of municipal solid waste at the Suzhou landfill, China

The current practice of slope stability analysis for a municipal solid waste (MSW) landfill usually overlooks the dependence of waste properties on the fill age or embedment depth. Changes in shear strength of MSW as a function of fill age were investigated by performing field and laboratory studies on the Suzhou landfill in China. The field study included sampling from five boreholes advanced to the bottom of the landfill, cone penetration tests and monitoring of pore fluid pressures. Twenty-six borehole samples representative of different fill ages (0 to 13 years) were used to perform drained triaxial compression tests. The field and laboratory study showed that the waste body in the landfill can be sub-divided into several strata corresponding to different ranges of fill age. Each of the waste strata has individual composition and shear strength characteristics. The triaxial test results showed that the MSW samples exhibited a strain-hardening and contractive behavior. As the fill age of the waste increased from 1.7 years to 11 years, the cohesion mobilized at a strain level of 10% was found to decrease from 23.3 kPa to 0 kPa, and the mobilized friction angle at the same strain level increasing from 9.9° to 26°. For a confinement stress level greater than 50 kPa, the shear strength of the recently-placed MSW seemed to be lower than that of the older MSW. This behavior was consistent with the cone penetration test results. The field measurement of pore pressures revealed a perched leachate mound above an intermediate cover of soils and a substantial leachate mound near the bottom of the landfill. The measurements of shear strength properties and pore pressures were utilized to assess the slope stability of the Suzhou landfill.     

广州地区深基坑支护形式研究

介绍了广州地区基坑支护近年来的主要类型及其适用范围,并在分析选型各影响因素的基础上,总结出设计选型的要点。     

花岗岩残积土水土特征曲线的试验研究

本文采用渗析法测定花岗岩残积土的水土特征曲线,详细介绍了渗析法的试验步骤及注意事项,并对花岗岩残积土的水土特征曲线进行了分析。通过试验得到残积土水土特征曲线,无论是干燥段或是浸湿段,下降都较为平缓。花岗岩残积土的进气值较低,仅为10kPa左右,而土体残余含水量较大,为20%左右,说明花岗岩残积土持水能力较强。文章还对水土特征曲线的滞回圈进行了分析,认为水土特征曲线的滞回圈应该是由多种原因引起的。     

华北东部平原深层抽水井水跃值计算方法及其规律研究

文章分析了目前常用的几种水跃值计算方法的适用性与不足,认为在华北东部平原地下水位变化强烈的漏斗区,这些方法均难以应用。同时提出了C—G法,即一次定流量抽水同步观测抽水井和观测井的水位,合理地解决了区域背景水位对水跃值计算的影响。研究表明,与修正后的多次定流量试验法——两次定流量抽水法相比,C—G法计算结果可靠。然后探讨了如何间接获取抽水期间抽水层区域背景水位动态资料的方法,校正背景水位波动对抽水水位的影响,采用自动水位计(DIVER)同步监测井中大气压对地下水位的影响。最后分析水跃值随时间和抽水井水位降深的变化规律。     

圆柱螺线法测斜计算中的数值方法

圆柱螺线法是井眼轨迹计算中最常使用的方法之一,在实钻轨迹监控、中靶分析和预测、井身质量评价等实际问题中都有重要的应用.但是当井段2个端点的井斜角之差或者方位角之差等于零时,圆柱螺线法坐标计算公式需要进行特殊处理才能正常计算;在井斜角之差或者方位角之差很小时,坐标计算会出现较大误差.对圆柱螺线法坐标计算公式进行了改进,用一组计算公式统一处理井斜角之差或者方位角之差等于零和不等于零的情况,提高了坐标的数值计算的精度和稳定性.对圆柱螺线型井眼轨迹的平均井眼曲率的数值计算进行了研究,提出了使用高斯型数值积分公式计     

浙江省长兴县煤山剖面二叠—三叠系过渡地层中的黑碳记录及其地质意义

首次报道了浙江煤山二叠-三叠系界线地层中黑碳的含量及其碳同住素的变化特征。黑碳含量在26层存在一个明显的峰值,含量高达0．51％。黑碳与总有机碳比值从25层底部开始持续升高,在26层达到最高,稳定在0．40以上。黑碳的碳同位素在24层和25层之间有一个陡然的降低,降低幅度达2‰,在25和26层中则存在一个幅度达3‰的缓慢降低,总降低幅度达5‰。黑碳是动植物和化石燃料燃烧的天然记录,浙江煤山二叠-三叠系界线附近黑碳特征反映了二叠纪末期陆地生态系统发生了突然的衰退,发生了强烈的天然大火。根据事件层大火燃烧的长期性或频繁的特征,以及黑碳同位素大幅度陡然降低和缓慢降低,认为燃烧源除了陆地植被外,还有其他富含轻碳的化石燃料,即大火的燃烧源除了植被外,还可能有煤和甲烷水合物等。浙江煤山剖面的黑碳记录,反映了二叠-三叠纪之交地球陆地环境的剧烈变化,有助于理解和揭示生物大灭绝的过程和原因。     

基于AGA的SVM需水预测模型研究

需水预测是一个由城市人口、工业水平、社会经济水平共同作用的多因素、多层次的复杂非线性系统.其结果将直接影响受区域水资源承载力约束的产业结构、布局形态等决策.作为一种集中参数预报方法,支持向量机方法具有对未来样本的较好的泛化性能,对于这类资料缺乏、系统结构尚欠清晰的问题可以取得较好的模拟和预测结果.基于此,本文将支持向量机方法引入需水预测领域,建立了需水预测支持向量机模型.同时,本文将加速遗传算法和支持向量机方法耦合起来,构造了支持向量机模型参数的自适应优化算法.模型在珠海市的应用实例表明:与简单遗传算法比较,AGA的模型参数寻优效率更高;与BP神经网络模型相比,SVM模型较好地解决了小样本、经验性等问题,并取得了较高的预测精度.