Axisymmetric seismic response of a thick circular plate supporting many rods by modal synthesis

Dynamic response of a thick, horizontal, circular plate supporting a large number of slender rods subjected to uniform boundary motion in the vertical direction has been studied by synthesizing component modes of continuous substructures. The excitation considered corresponds to the vertical component of boundary movement produced by earthquake disturbances and the axisymmetric response problem was solved. Mindlin theory was used to formulate the component equations of the plate which is treated as the main component in a modal synthesis technique. The slender rods, which are attached vertically to the plate, are handled as branch components. Vibration modes of a classical thin plate were used as the initial displacement functions for the Mindlin plate. These functions were subsequently modified by a component mode improvement process to obtain plate modes. System modes were generated by combining the improved plate modes with component modes of rods. Numerical results for the natural frequencies and time-history response of the coupled system are compared with those given by a three-dimensional finite element method.     

Amino acids in equatorial Pacific Ocean water

Seawater samples from the Eastern Equatorial Pacific Ocean were analyzed for amino acids by a ligand-exchange chromatography technique. The results showed that dissolved free amino acids make up only 0.3% of DOC, much less than has been previously reported for open ocean waters. Substantially larger amounts of combined amino acids are present, however. Concentration variations of the combined amino acid fraction in the water column suggest their potential use as a water mass indicator.     

Study on the kinetics of iron oxide leaching by oxalic acid

The presence of iron oxides in clay or silica raw materials is detrimental to the manufacturing of high quality ceramics. Although iron has been traditionally removed by physical mineral processing, acid washing has been tested as it is more effective, especially for extremely low iron (of less than 0.1% w/w). However, inorganic acids such as sulphuric or hydrochloric acids easily contaminate the clay products with SO₄²⁻ and Cl⁻, and therefore should be avoided as much as possible. On the other hand, if oxalic acid is used, any acid left behind will be destroyed during the firing of the ceramic products. The characteristics of dissolution of iron oxides were therefore investigated in this study.The dissolution of iron oxides in oxalic acid was found to be very slow at temperatures within the range 25–60 °C, but its rate increases rapidly above 90 °C. The dissolution rate also increases with increasing oxalate concentration at the constant pH values set within the optimum range of pH2.5–3.0. At this optimum pH, the dissolution of fine pure hematite (Fe₂O₃) (105–140 μm) follows a diffusion-controlled shrinking core model. The rate expression expressed as 1 − (2 / 3)x − (1 − x)^2 / 3 where x is a fraction of iron dissolution was found to be proportional to [oxalate]^1.5.The addition of magnetite to the leach liquor at 10% w/w hematite was found to enhance the dissolution rate dramatically. Such addition of magnetite allows coarser hematite in the range 0.5–1.4 mm to be leached at a reasonable rate.     

Performance evaluation of ultrafine cement as a grout for reservoir impermeability improvement

Acta Geotechnica - Although Ordinary Portland Cement (OPC) has been widely used as one of the significant grouting materials, there are many drawbacks to its application in the field. In this...     

On Tension Failure of 2-D Rock Specimens and Associated Acoustic Emission

Summary To understand the failure mechanism of quasi-brittle materials like rock under tensile stress, observations on the failure process of granite and marble plate specimens under tension are summarized and presented. Micro- and macro-failure properties of rock plates under uniaxial tension have been characterized by using an acoustic emission technique. Acoustic emission signals associated with micro-fractures are captured to locate the sources. An algorithm based on arrival time difference is developed for this purpose. The results reveal clearly the failure processes of rock which include initiation, nucleation and propagation of micro-fractures when the axial stress is close to the peak strength of rock. It is believed that the difference in heterogeneity between granite and marble specimens leads to different fracture shapes and different behaviors of associated acoustic emissions. Numerical simulation of acoustic emissions for two-dimensional tensile test is also carried out. The simulated characteristics are in good agreement with the experimental results.     

Transport of dissolved methoxy-nonafluorobutane through a saturated column

Solute transport experiments were conducted in a one-dimensional saturated column using dissolved methoxy-nonafluorobutane (HFE-7100), a Novec engineered fluid developed by the 3M Corporation, as the solute. Novec engineered fluids are considered dense non-aqueous phase liquids (DNAPLs) because they are immiscible with water and have a specific gravity greater than one. The HFE-7100 fluid is safer and environmentally friendlier than common DNAPL contaminants such as tetrachloroethylene (PCE) or trichloroethylene (TCE); thus, it is an ideal substitute DNAPL for laboratory groundwater contamination research. Three sets of solute transport experiments were conducted. The first set of experiments was conducted in a glass-bead-packed column using dissolved HFE-7100 as the solute. The second set of experiments was conducted in a sand-packed column using dissolved HFE-7100 as the solute. The third set of experiments was conducted in a sand-packed column using dissolved PCE as the solute. The dissolved HFE-7100 column breakthrough concentrations were compared with dissolved PCE breakthrough concentrations. Results show that the one-dimensional solute transport equation was successful in describing the transport behavior of dissolved HFE-7100. This study demonstrates that the HFE-7100 fluid can be used as a safer substitute DNAPL for groundwater contaminant dissolution and transport research.     

Satellite-based assessment of large-scale land cover change in Asian arid regions in the period of 2001–2009

Arid regions in Asia are commonly characterized by rapidly growing populations with limited land resources and varying rainfall frequencies under climatic change. Despite being one of the most important environmental challenges in Asia, the changing aridity in this region, particularly due to large-scale land cover change, has not been well documented. In this study, we used rainfall data and a new land heterogeneity index to identify recent trend in land cover changes in the Asian arid regions. The result indicates a significant decreasing trend of barren lands and an increasing trend of vegetated lands. Although the potential land cover change is commonly believed to be strongly sensitive to rainfall change, such sensitivity has not been observed during the nine-year period (2001–2009) analyzed. Through the analyses of two separate periods (2001–2005 and 2005–2009), the sensitivity of rainfall to land cover change in arid regions is found to be dependent on the initial spatial heterogeneity of vegetated land cover. The approach used and the findings in this study represent an important step toward better understanding of large-scale land cover change in the Asian arid regions, and have the potential to predict future land cover change under various climate change scenarios.     

Comparison of the Ordovician-Carboniferous Boundary Between Korea and NE China: Implications for Correlation and Tectonic Evolution

There is a great hiatus between Ordovician and Carboniferous strata in the Northeast China and Korean Peninsula. In order to understand geology and tectonic evolution, and to find out the similarities and differences in both regions, two sections in the Western Hill near Beijing in NE China and several sections in the Korean Peninsula were selected to examine their geologic boundaries between Lower and Upper Paleozoic strata to compare their characteristic features. At four sites in the two sections in the Western Hill near Beijing were examined their contact relations. The Hui Yu section is the same horizon where one site is top of a quarry hill and the other of down hill. Mid-Carboniferous Qingshuijian Formation rests on the Ordovician Majiagou Formation. Limestone beds are more commonly intercalated with shale and sandstone at site 2 of the Hui Yu section, while at site 1, conglomerate beds are dominant. Site 1 of the Se Shu Fen section shows eroded and concealed karst topography and conglomerate beds are intercalated within shale beds. Silurian and Devonian strata are absent in these areas. In the Korean Peninsula, most O-C contacts occur between Ordovician limestone formation and Carboniferous strata, although Silurian strata occur beneath the Carboniferous strata in the Jeongseon area and Pyeongnam Basin. Most contact relations are parallel unconformity and angular unconformity is rarely seen. The O-C relations in both regions are similar to each other, and these indicate that the Korean Peninsula was located near or belonged to the Sino-Korean paraplatform during Paleozoic time.