Influence of magnetic effect,anisotropy, irregularity,initial stress and heterogeneity on propagation of SH-wave in an irregular pre-stressed magnetoelastic monoclinic sandwiched layer

Monoclinic materials viz. quartz, lithium niobate and lithium tantalate are among the most abundant materials, finding numerous applications throughout the technological world. Moreover, the presence of irregularity, initial stresses, anisotropy and heterogeneity in a material medium is obvious. These facts motivate the study of magnetoelastic SH-wave propagation in an irregular monoclinic sandwiched layer between a heterogeneous isotropic layer and an isotropic half space, all under initial stress. The heterogeneity in the uppermost layer is caused due to exponential variation in rigidity, density and initial stress in terms of space variable pointing vertically downward. The dispersion relation has been obtained using first-order perturbation technique. The substantial effect of wave number, anisotropy, irregularity, width ratio of the layers, horizontal compressive/tensile initial stresses, heterogeneity and monoclinic-magnetoelastic coupling parameter associated with sandwiched layer on phase velocity of SH-wave has been studied and depicted by means of graph. Comparative study made for the case when pre-stressed irregular sandwiched layer is monoclinic-magnetoelastic to the case when it is isotropic magnetoelastic layer is one of the major highlights of the current study.     

Roughness control on hydraulic conductivity in fractured rocks

The influence of joint roughness on the typologies of fluid flow inside fractures is well known and, thanks to experiences in the field of hydraulics, it has been studied from both a physical and mathematical point of view. Nevertheless, the formulations adopted by traditional hydraulic models are hardly applicable in the geological field, because of the difficulty encountered in the roughness parameter estimation. Normally this parameter can be estimated using the joint roughness coefficient (JRC), which considers both the asperity height and its regularity and directional trend. The main advantage in using the JRC arises from the fact that it can easily be obtained from geological-technical surveys and from comparison with the standard Barton profiles. Some relationships have been built up that allow for the estimation of the hydraulic conductivity tensor (an essential parameter for understanding water flow in fractured rock masses), not only as a function of traditional parameters like aperture, spacing, dip and dip direction, etc., but also of joint roughness, precisely expressed in terms of the roughness coefficient. These relationships have been studied initially from a theoretical point of view and then practically, through laboratory investigations.

---

Resumen  Se conoce muy bien la influencia de la rugosidad de las grietas en las tipologías del flujo de fluidos a lo interior de las fracturas y gracias a las experiencias en el campo de hidráulica ha sido posible estudiarla desde puntos de vista matemáticos y físicos. Sin embargo, las formulaciones adoptadas por los modelos hidráulicos tradicionales tienen poca aplicabilidad en el campo geológico debido a la dificultad relacionada con la estimación del parámetro de rugosidad. Normalmente este parámetro puede estimarse usando el coeficiente de rugosidad de grieta (JRC) el cual considera tanto la altura de la aspereza como su regularidad y tendencia direccional. La principal ventaja de utilizar el JRC se deriva del hecho que puede obtenerse fácilmente de levantamientos técnico-geológicos y de la comparación con los perfiles Standard Barton. Se han construido algunas relaciones que permiten la estimación del tensor de conductividad hidráulica (un parámetro esencial para el entendimiento del flujo de agua en masas de roca fracturadas), no solo en función de parámetros tradicionales como apertura, espaciado, buzamiento y dirección de buzamiento, etc., sino también en función de la rugosidad de la grieta estimada con precisión en términos del coeficiente de rugosidad. Estas relaciones se han estudiado inicialmente desde un punto de vista teórico y luego de modo práctico a través de investigaciones de laboratorio.

---

Résumé  L’influence de la rugosité des joints sur les types d’écoulement de fluide dans les fractures est bien connue et a été étudiée aussi bien du point de vue physique que mathématique grace à des expériences menées dans le domaine de l’hydraulique. Cependant les formulations adoptées dans les modèles hydrauliques traditionnels sont difficilement applicables dans le domaine de la géologie à cause de la difficulté rencontrée pour estimer la rugosité. Ce paramètre peut normalement être apprécié grace au coefficient de rugosité du joint (JRC), lequel prend en compte à la fois la hauteur de l’aspérité ainsi que sa régularité et sa direction. Le principal avantage dans l’utilisation du JRC réside dans le fait qu’il peut facilement être obtenu à partir d’études techniques-géologiques et par comparaison avec la classification de Barton. Des relations qui permettent une estimation du tenseur de conductivité hydraulique (un paramètre essentiel pour comprendre l’écoulement de l’eau dans les masses rocheuses fracturées) ont été élaborées, pas seulement en fonction de paramètres traditionnels tels que l’ouverture, l’espacement, l’inclinaison et la direction d’inclinaison, etc , mais aussi en prenant en compte la rugosité des joints à travers le coefficient de rugosité. Ces relations ont initialement été étudiées d’un point de vue théorique puis expérimentalement à travers des recherches en laboratoire.

     

Organized bacterial assemblies in manganese nodules: evidence for a role of S-layers in metal deposition

Polymetallic/ferro-manganese nodules (Mn-nodules) reach sizes of up to 10 cm in diameter and are abundantly found on the seabed. To date, the origin of Mn-nodules remains unclear, and both abiogenic and biogenic origins have been proposed. In search of evidence for a contribution of microbial processes to the formation of Mn-nodules, we analyzed those spherical nodules which contain a concentrically banded texture in their interior. The Mn-nodules were collected at a depth of 5,152 m from the Clarion-Clipperton Zone. Our high-resolution scanning electron microscopy analyses reveal first published evidence that endolithic microorganisms exist and are arranged in a highly organized manner on plane mineral surfaces within the nodules. These microorganisms are adorned on their surfaces with S-layers, which are indicative for bacteria. Moreover, the data suggest that these S-layers are the crystallization seeds for the mineralization process. We conclude that the mineral material of the Mn-nodule has a biogenic origin, and hope that these data will contribute to the development of biotechnological approaches to concentrate metals from seawater using bacteria in bioreactors.     

Optimal two-impulse rendezvous using constrained multiple-revolution Lambert solutions

A solution to the fixed-time minimum-fuel two-impulse rendezvous problem for the general non-coplanar elliptical orbits is provided. The optimal transfer orbit is obtained using the constrained multiple-revolution Lambert solution. Constraints consist of lower bound for perigee altitude and upper bound for apogee altitude. The optimal time-free two-impulse transfer problem between two fixed endpoints implies finding the roots of an eighth order polynomial, which is done using a numerical iterative technique. The set of feasible solutions is determined by using the constraints conditions to solve for the short-path and long-path orbits semimajor axis ranges. Then, by comparing the optimal time-free solution with the feasible solutions, the optimal semimajor axis for the two fixed-endpoints transfer is identified. Based on the proposed solution procedure for the optimal two fixed-endpoints transfer, a contour of the minimum cost for different initial and final coasting parameters is obtained. Finally, a numerical optimization algorithm (e.g., evolutionary algorithm) can be used to solve this global minimization problem. A numerical example is provided to show how to apply the proposed technique.     

Chesapeake Bay Plume Morphology and the Effects on Nutrient Dynamics and Primary Productivity in the Coastal Zone

To determine the effects of the Chesapeake Bay outflow plume on the coastal ocean, nutrient concentrations and climatology were evaluated in conjunction with nitrogen (N) and carbon (C) uptake rates during a 3-year field study. Sixteen cruises included all seasons and captured high- and low-flow freshwater input scenarios. Event-scale disturbances in freshwater flow and wind speed and direction strongly influenced the location and type of plume present and thus the biological uptake of N and C. As expected, volumetric primary productivity rates did not always correlate with chlorophyll a concentrations, suggesting that high freshwater flow does not translate into high productivity in the coastal zone; rather, high productivity was observed during periods where recycling processes may have dominated. Results suggest that timing of meteorological events, with respect to upwelling or downwelling favorable conditions, plays a crucial role in determining the impact of the estuarine plume on the coastal ocean.     

A 35-GHz Polarimetric Doppler Radar and Its Application for Observing Clouds Associated with Typhoon Nuri

Millimeter-wavelength radar has proved to be an effective instrument for cloud observation and research. In this study, 8-mm-wavelength cloud radar (MMCR) with Doppler and polarization capabilities was used to investigate cloud dynamics in China for the first time. Its design, system specifications, calibration, and application in measuring clouds associated with typhoon are discussed in this article. The cloud radar measurements of radar reflectivity (Z), Doppler velocity (Vr), velocity spectrum width (Sw) and the depolar-ization ratio (LDR) at vertical incidence were used to analyze the microphysical and dynamic processes of the cloud system and precipitation associated with Typhoon Nuri, which occurred in southern China in August 2008. The results show the reflectivity observed using MMCR to be consistent with the echo height and the melting-layer location data obtained by the nearby China S-band new-generation weather radar (SA), but the Ka-band MMCR provided more detailed structural information about clouds and weak precipitation data than did the SA radar. The variation of radar reflectivity and LDR in vertical structure reveals the transformation of particle phase from ice to water. The vertical velocity and velocity spectrum width of MMCR observations indicate an updraft and strong turbulence in the stratiform cloud layer. MMCR provides a valuable new technology for meteorological research in China.     

The role of iron and sulfur in the visual appearance of lake sediment varves

Easily discernible sediment varves (annual laminations) may be formed in temperate zone lakes, and reflect seasonal changes in the composition of the accumulating material derived from the lake and its catchment (minerogenic and organic material). The appearance of varves may also be influenced by chemical processes. We assessed the role of iron (Fe) and sulfur (S) in the appearance of varves in sediments from Lake Nylandssjön in northern Sweden. We surveyed Fe in the lake water and established whether there is internal transport of Fe within the sediment. We used a unique collection of seven stored freeze cores of varved sediment from the lake, collected from 1979 to 2004. This suite of cores made it possible to follow long-term changes in Fe and S in the sediment caused by processes that occur in the lake bottom when the sediment is ageing. We compared Fe and S concentrations using X-ray fluorescence spectroscopy (XRF) in specific years in the different cores. No diagenetic front was found in the sediment and the data do not suggest that there is substantial vertical transport of Fe and S in the sediment. We also modeled Fe and S based on thermodynamic, limnological, and sediment data from the lake. The model was limited to the five components H⁺, e^?, Fe³⁺, SO₄ ^2?, H₂CO₃ and included the formation of solid phases such as Fe(OH)₃ (amorphous), FeOOH (aged, microcrystalline), FeS and FeCO₃. Modeling showed that there are pe (redox) ranges within which either FeS or Fe(OH)₃/FeOOH is the only solid phase present and there are pe ranges within which the two solid phases co-exist, which supports the hypothesis that blackish and grey-brownish layers that occur in the varves were formed at the time of deposition. This creates new possibilities for deciphering high-temporal-resolution environmental information from varves.     

Assessing the vegetation canopy influences on wind flow using wind tunnel experiments with artificial plants

Wind erosion causes serious problems and considerable threat in most regions of the world. Vegetation on the ground has an important role in controlling wind erosion by covering soil surface and absorbing wind momentum. A set of wind tunnel experiments was performed to quantitatively examine the effect of canopy structure on wind movement. Artificial plastic vegetations with different porosity and canopy shape were introduced as the model canopy. Normalized roughness length (Z ₀/H) and shear velocity ratio (R) were analyzed as a function of roughness density (λ). Experiments showed that Z ₀/H increases and R decreases as λ reaches a maximum value, λ _max, while the values of Z ₀/H and R showed little change with λ value beyond as λ _max.