Atmospheric chemistry of hydrogen fluoride

Although a large volume of monitoring and computer simulation data exist for global coverage of HF, study of HF in the troposphere is still limited to industry whose primary interest is the safety and risk assessment of HF release because it is a toxic gas. There is very limited information on atmospheric chemistry, emission sources, and the behavior of HF in the environment. We provide a comprehensive review on the atmospheric chemistry of HF, modeling the reactions and transport of HF in the atmosphere, the removal processes in the vertical layer immediately adjacent to the surface (up to approximately 500 m) and recommend research needed to improve our understanding of atmospheric chemistry of HF in the troposphere. The atmospheric chemistry, emissions, and surface boundary layer transport of hydrogen fluoride (HF) are summarized. Although HF is known to be chemically reactive and highly soluble, both factors affect transport and removal in the atmosphere, the chemistry can be ignored when the HF concentration is at a sufficiently low level (e.g., 10 ppmv). At a low concentration, the capability for HF to react in the atmosphere is diminished and therefore the species can be mathematically treated as inert during the transport. At a sufficiently high concentration of HF (e.g., kg/s release rate and thousands of ppm), however, HF can go through a series of rigorous chemical reactions including polymerization, depolymerization, and reaction with water to form molecular complex. As such, the HF species cannot be considered as inert because the reactions could intimately influence the plume’s thermodynamic properties affecting the changes in plume temperature and density. The atmospheric residence time of HF was found to be less than four (4) days, and deposition (i.e., atmosphere to surface transport) is the dominant mechanism that controls the removal of HF and its oligomers from the atmosphere. The literature data on HF dry deposition velocity was relatively high compared to many commonly found atmospheric species such as ozone, sulfur dioxide, nitrogen oxides, etc. The global average of wet deposition velocity of HF was found to be zero based on one literature source. Uptake of HF by rain drops is limited by the acidity of the rain drops, and atmospheric particulate matter contributes negligibly to HF uptake. Finally, given that the reactivity of HF at a high release rate and elevated mole concentration cannot be ignored, it is important to incorporate the reaction chemistry in the near-field dispersion close to the proximity of the release source, and to incorporate the deposition mechanism in the far-field dispersion away from the release source. In other words, a hybrid computational scheme may be needed to address transport and atmospheric chemistry of HF in a range of applications. The model uncertainty will be limited by the precision of boundary layer parameterization and ability to accurately model the atmospheric turbulence.     

Influence of leaf water potential on diurnal changes in CO2 and water vapour fluxes

Mass and energy fluxes between the atmosphere and vegetation are driven by meteorological variables, and controlled by plant water status, which may change more markedly diurnally than soil water. We tested the hypothesis that integration of dynamic changes in leaf water potential may improve the simulation of CO₂ and water fluxes over a wheat canopy. Simulation of leaf water potential was integrated into a comprehensive model (the ChinaAgrosys) of heat, water and CO₂ fluxes and crop growth. Photosynthesis from individual leaves was integrated to the canopy by taking into consideration the attenuation of radiation when penetrating the canopy. Transpiration was calculated with the Shuttleworth-Wallace model in which canopy resistance was taken as a link between energy balance and physiological regulation. A revised version of the Ball-Woodrow-Berry stomatal model was applied to produce a new canopy resistance model, which was validated against measured CO₂ and water vapour fluxes over winter wheat fields in Yucheng (36°57′ N, 116°36′ E, 28 m above sea level) in the North China Plain during 1997, 2001 and 2004. Leaf water potential played an important role in causing stomatal conductance to fall at midday, which caused diurnal changes in photosynthesis and transpiration. Changes in soil water potential were less important. Inclusion of the dynamics of leaf water potential can improve the precision of the simulation of CO₂ and water vapour fluxes, especially in the afternoon under water stress conditions.     

Multi-Source Emission Determination Using an Inverse-Dispersion Technique

Inverse-dispersion calculations can be used to infer atmospheric emission rates through a combination of downwind gas concentrations and dispersion model predictions. With multiple concentration sensors downwind of a compound source (whose component positions are known) it is possible to calculate the component emissions. With this in mind, a field experiment was conducted to examine the feasibility of such multi-source inferences, using four synthetic area sources and eight concentration sensors arranged in different configurations. Multi-source problems tend to be mathematically ill-conditioned, as expressed by the condition number κ. In our most successful configuration (average κ = 4.2) the total emissions from all sources were deduced to within 10% on average, while component emissions were deduced to within 50%. In our least successful configuration (average κ = 91) the total emissions were calculated to within only 50%, and component calculations were highly inaccurate. Our study indicates that the most accurate multi-source inferences will occur if each sensor is influenced by only a single source. A “progressive” layout is the next best: one sensor is positioned to “see” only one source, the next sensor is placed to see the first source and another, a third sensor is placed to see the previous two plus a third, and so on. When it is not possible to isolate any sources κ is large and the accuracy of a multi-source inference is doubtful.     

长江下游仪征河段汊道分流属性及航道滩槽演变机制

长江下游仪征河段处于枯季潮流界的上边界,揭示其汊道分流属性及滩槽联动演变机制,对河势控制工程及深水航道工程实践具有重要意义.本研究收集了1955—2021年水文泥沙及地形等资料,在汊道分流关系及调整成因上:世业洲右汊的分流属性为枯水倾向型汊道,即低流量时期分流比大于高流量时期;1959—2021年期间,世业洲右汊分流比经历了“稳定-下降-上升”的调整过程,上游河段滩槽格局调整及流域来沙减少引起的汊道间不均衡冲刷是分流关系调整的主因;流域流量过程调整、河道崩岸等综合影响引起1959—2017年期间世业洲右汊分流比为减小态势,航道工程实施起到了调控汊道关系的功能,世业洲右汊分流比为增加态势.在滩槽联动演变关系上:仪征河段进口段以展宽为主,世业洲左汊展宽程度大于右汊,左汊河床形态变化与进口段滩槽形态的一致性关系优于右汊,即上游进口段滩槽演变、流域来沙量减少等综合作用会加速了左汊发展;2015年南京以下12.5 m深水航道二期工程建设以来,工程区域淤积且洲体完整性增强,且深槽冲刷及河槽容积增大,表明航道工程已实现汊道分流关系及滩槽调控的功能.     

编者按

<正>三峡工程举世瞩目,是长江流域大保护与流域水安全保障的关键性枢纽工程。自2003年三峡工程蓄水以来,在防洪、发电、航运、供水等方面产生了巨大的经济、社会及生态环境等综合效益。同时,水库建成后,重庆至宜昌600多km的自然河道变成了人为控制的大型河流型深水水库,不仅在库区形成了诸如消落带、干-支流往复交融的独特生境,而且由于下泄水流、泥沙、营养盐等水文及生物地球化学要素的时空变化,     

How effective is the new generation of GPM satellite precipitation in characterizing the rainfall variability over Malaysia?

We investigated the potential of the new generation of satellite precipitation product from the Global Precipitation Mission (GPM) to characterize the rainfall in Malaysia. Most satellite precipitation products have limited ability to precisely characterize the high dynamic rainfall variation that occurred at both time and scale in this humid tropical region due to the coarse grid size to meet the physical condition of the smaller land size, sub-continent and islands. Prior to the status quo, an improved satellite precipitation was required to accurately measure the rainfall and its distribution. Subsequently, the newly released of GPM precipitation product at half-hourly and 0.1° resolution served an opportunity to anticipate the aforementioned conflict. Nevertheless, related evidence was not found and therefore, this study made an initiative to fill the gap. A total of 843 rain gauges over east (Borneo) and west Malaysia (Peninsular) were used to evaluate the rainfall the GPM rainfall data. The assessment covered all critical rainy seasons which associated with Asian Monsoon including northeast (Nov. - Feb.), southwest (May - Aug.) and their subsequent inter-monsoon period (Mar. - Apr. & Sep. - Oct.). The ability of GPM to provide quantitative rainfall estimates and qualitative spatial rainfall patterns were analysed. Our results showed that the GPM had good capacity to depict the spatial rainfall patterns in less heterogeneous rainfall patterns (Spearman’s correlation, 0.591 to 0.891) compared to the clustered one (r = 0.368 to 0.721). Rainfall intensity and spatial heterogeneity that is largely driven by seasonal monsoon has significant influence on GPM ability to resolve local rainfall patterns. In quantitative rainfall estimation, large errors can be primarily associated with the rainfall intensity increment. 77% of the error variation can be explained through rainfall intensity particularly the high intensity (> 35 mm d^-1). A strong relationship between GPM rainfall and error was found from heavy (~35 mm d^-1) to violent rain (160 mm d^-1). The output of this study provides reference regarding the performance of GPM data for respective hydrology studies in this region.     

Simulation Study on High Energy Cosmic Electron Detection by Shower Image

Many projects have recently been carried out and proposed for observing high energy electrons since it is realized that cosmic ray electrons are very important when study-ing the dark matter particles and the acceleration mechanism of cosmic rays. An imaging calorimeter,BETS (Balloon-borne Electron Telescope with Scintillator fiber),has been de-veloped for this purpose. Using pattern analysis of the shower development,the electrons can be selected from those primary cosmic ray proton events with flux heights one-tenth that of the electrons. The Monte-Carlo simulation is indispensable for the instrument design,the sig-nal trigger and the data analysis. We present different shower simulation codes and compare the simulation results with the beam test and the flight data of BETS. We conclude that the code FLUKA2002 gives the most consistent results with the experimental data.     

Seasonal change in body length of important small copepods and relationship with environmental factors in Jiaozhou Bay,China

Differences among species in prosome length and in species’ response to environmental factors do exist. Therefore, it is useful to examine prosome length for different copepod species in variable environments. Seasonal variations in prosome length of four small copepods and their copepodite stages in the Jiaozhou Bay were compared and the relative influence of temperature, salinity, and chlorophyll concentration were examined. Two peaks were found in the mean prosome length of Paracalanus parvus (in early winter and May). For Acartia bifilosa, the maximum values of all copepodites occurred mainly from February to April, and decreased to the bottom in July. Prosome length of Acartia pacifica peaked when it first appeared in June, then reached to the minimum in July. Parvocalanus crassirostris only appeared from late summer to autumn and the mean prosome length showed no clear changes. Correlations of adult prosome length with environmental factors were evaluated. For the four species, temperature was negatively correlated to prosome length except for P. crassirostris. But the different species varied markedly in their responds to temperature. A. bifilosa showed a more definite trend of size variation with temperature than P. parvus and A. pacifica. Correlations of prosome length with salinity were significantly positive for almost all the small copepods. The relationship between chlorophyll concentration and prosome length was complicated for these copepods, but for P. parvus, chlorophyll concentration was also an important affecting factor. Furthermore, investigation needs to be done on food quality for some copepod. These results are essential to estimate the biomass and the production, and to understand these small copepods’ population dynamics in this human-affected bay.     

A sulfotransferase specific to N-21 of gonyautoxin 2/3 from crude enzyme extraction of toxic dinoflagellate Alexandrium tamarense CI01

Sulfotransferase (ST) is the first enzyme discovered in association with paralytic shellfish poisoning (PSP) toxin biosynthesis in toxic dinoflagellates. This study investigates the ST activity in crude enzyme extraction of a toxic dinoflagellate species, Alexandrium tamarense CI01. The results show that crude enzyme can transfer a sulfate group from 3’-phosphoadenosine 5’-phosphosulfate (PAPS) to N-21 in the carbamoyl group of gonyautoxin 2/3 (GTX2/3) to produce C1/C2, but is inactive toward STX to produce GTX5. The crude enzyme is optimally active at pH 6.0 and 15°C. The activity is enhanced by Co2 , Mg2 , Mn2 and Ca2 individually, but is inhibited by Cu2 . Moreover, the activity shows no difference when various sulfur compounds are used as sulfate donors. These results demonstrate that the ST specific to GTX2/3 is present in the cells of A. tamarense CI01 and is involved in PSP toxin biosynthesis. In addition, the ST from different dinoflagellates is species-specific, which explains well the various biosynthesis pathways of the PSP toxins in toxic dinoflagellates.     

���ʻ���̽��ƻ���չ���й������������������ƻ��о�

??????????????????????????????????????????????????? ????SGG-Doppler??VLBI???????????????????????????й???????????????????????????????SGG-Doppler-VLBI????????????????????????