Seismicity of Sinai Peninsula, Egypt

The Sinai Peninsula has a triangular shape between the African and Arabian Plates and is bounded from the western and eastern borders by the Gulf of Suez and Gulf of Aqaba–Dead Sea rift systems, respectively. It is affected by strong and destructive earthquakes (e.g., March 31, 1969 and November 22, 1995) and moderate earthquakes (m _b?>?5) throughout its history. After the installation of the Egyptian National Seismic Network (ENSN), a great number of earthquakes has been recorded within and around Sinai. Consequently, the seismogenic source zones and seismotectonic behavior can be clearly identified. Available data, including both historical and instrumental (1900–1997), have been collected from national and international data centers. While the data from 1998 till December 2007 are gathered from ENSN bulletins. The seismogenic source zones that might affect Sinai Peninsula are defined more precisely in this work depending on the distribution of earthquakes, seismicity rate (a value), b value, and fault plane solution of the major earthquakes. In addition, the type of faults prevailed and characterized these zones. It is concluded that the Gulf of Aqaba zone–Dead Sea transform zone, Gulf of Suez rift zone, Cairo–Suez District zone, and Eastern Mediterranean dislocation zone represent the major effective zones for Sinai. Furthermore, there are two local seismic zones passing through Sinai contributing to the earthquake activities of Sinai, these are the Negev shear zone and Central Sinai fault (Themed fault) zone. The source parameters, a and b values, and the maximum expected moment magnitude have been determined for each of these zones. These results will contribute to a great extent in the seismic hazard assessment and risk mitigation studies for Sinai Peninsula to protect the developmental projects.     

Physical model experiments for sediment supply to the old Rhine through induced bank erosion

A mobile-bed, undistorted physical model （1：40） has been used to investigate different sediment supply strategies to the Old Rhine through bank protection removal and modifications of groyne dimensions and configuration, which cause bank erosion. This trained channel was previously the main bed of the upper Rhine downstream of Basel （Switzerland）, but it has an artificially low flow regime since the construction of the Grand Canal d＇Alsace, a navigation canal, and a flow control dam at Kembs （France）. Training works and subsequent channel incision have also greatly reduced sediment transport rates and created a heavily armoured bed. The modelled pilot site has a groyne field on the left bank. Results show that the currently existing groynes at the site are not effective in creating high bank-side velocities conducive to bank erosion, even for flow rates significantly higher than the mean annual flow rate. The river bank has also proved to be more resistant than previously thought, allowing long stretches of bank protection to be safely removed. The physical model testing process has produced a new configuration for the groyne field, where two higher, larger island groynes are placed further apart than the three existing attached groynes. This innovative approach has proved effective, causing bank erosion for flow rates below the mean annual flow rate, with consistent erosion being observed. It has also been found that such a configuration does not pose a hazard for the Grand Canal d＇Alsace, which is situated next to the Old Rhine, through excessive bank erosion during high flow events.     

On the Seddon speed formula

Abstract

The Seddon speed formula expressed mathematically as c = dQ/dA (or alternatively, as c = (1 + m)u_o; where Q is the discharge, A is the area of cross-section, c is the wave speed, u_o is the normal flow velocity, and m is a dimensionless parameter) is revisited in the context of elasticity and thermodynamics. Its link with the linearized solution of St Venant's equations for wave celerity, which does not appear to have been reported in the hydrological literature, is established. The rating exponent m is shown to be equivalent to the dimensionless relative celerity and is found to be the ratio of two specific heats, viz. c_p and c_v which are the specific heats at constant pressure and volume, respectively. The use of the parameter m as a complex variable helps describe shallow wave characteristics, the damping capacity of a wave, and the mechanism of occurrence of the hysteretic phenomenon. The damping capacity is found to describe the magnitude of wave subsidence, whereas the hysteresis also describes the speed of subsidence.     

Hydrological simulation of a conservation bench terrace system in a subhumid climate

Abstract

A finite element model to simulate runoff and soil erosion from agricultural lands has been developed. The sequential solutions of the governing differential equations were found: Richards' equation with a sink term for infiltration and soil water dynamics under cropped conditions; St Venant equation with kinematic wave approximation for overland and channel flow; and sediment continuity equation, for soil erosion. The model developed earlier has been improved to simulate erosion/deposition in impoundments and predicted and observed soil loss values were in reasonably good agreement when the model was tested for a conservation bench terrace (CBT) system. The finite element model was extensively applied to study the hydrological behaviour of a CBT system vis-à-vis the conventional system of sloping borders. The model estimates runoff and soil loss reasonably well, under varying conditions of rainfall and at different crop growth stages. The probable reasons for discrepancies between observation and simulation are reported and discussed. Sensitivity analysis was carried out to study the effect of various hydrological, soil and topographical parameters, such as ratio of contributing to receiving areas, weir length, depth of impoundment, slope of contributing area, etc. on the flow behaviour in a CBT system.     

A note on the applicability of log-Gumbel and log-logistic probability distributions in hydrological analyses: II. Assumed pdf

Abstract

Applicability of log-Gumbel (LG) and log-logistic (LL) probability distributions in hydrological studies is critically examined under real conditions, where the assumed distribution differs from the true one. The set of alternative distributions consists of five two-parameter distributions with zero lower bound, including LG and LL as well as lognormal (LN), linear diffusion analogy (LD) and gamma (Ga) distributions. The log-Gumbel distribution is considered as both a false and a true distribution. The model error of upper quantiles and of the first two moments is analytically derived for three estimation methods: the method of moments (MOM), the linear moments method (LMM) and the maximum likelihood method (MLM). These estimation methods are used as methods of approximation of one distribution by another distribution. As recommended in the first of this two-part series of papers, MLM turns out to be the worst method, if the assumed LG or LL distribution is not the true one. It produces a huge bias of upper quantiles, which is at least one order higher than that of the other two methods. However, the reverse case, i.e. acceptance of LN, LD or Ga as a hypothetical distribution, while the LG or LL distribution is the true one, gives the MLM bias of reasonable magnitude in upper quantiles. Therefore, one should avoid choosing the LG and LL distributions in flood frequency analysis, especially if MLM is to be applied.     

Bias correction method of high-resolution satellite-based precipitation product for Peninsular Malaysia

Theoretical and Applied Climatology - Satellite-based precipitation (SBP) is emerging as a reliable source for high-resolution rainfall estimates over the globe. However, uncertainty in SBP is...     

Use of electrical resistivity tomography in delineating zones of groundwater potential in arid regions: a case study from Diriyah region of Saudi Arabia

A detailed geophysical investigation in the form of electrical resistivity tomography (ERT) was carried out using the SYSCAL Pro Unit at two locations with a dipole?Cdipole configuration in one of the private farms in Diriyah area of Riyadh, Saudi Arabia with the purpose of delineating the approximate depth of the water-bearing formations. The survey helped in delineating a superficial moist zone at the first site which was mainly due to the seepage from surface water pipes used for irrigating the date palms. At the second site, a potential water-bearing zone was detected starting from a depth of 23 to 46?m. However, an already existing bore well in close vicinity of the site of the second survey showed a water table depth of 85?m, indicating the presence of a layered aquifer. Finally, it was concluded that a shallow bore well drilled up to a depth of 50?C60?meters would be able to tap the water resources of shallow water-bearing horizon discovered at the second site during the survey; however, the yield of the bore well might not be sustainable over a longer period of time. The survey at the first site did not show any promising groundwater potential up to the investigated depth which was around 70?m. The study confirms the usage of ERT surveys for exploring sources of freshwater supplies in arid regions.