Characteristics of deuterium excess parameters for geothermal water in Beijing

This study investigates the characteristics of geothermal water in 10 geothermal fields in Beijing. The relationships between the deuterium excess parameter (d) and temperature, depth, age of geothermal groundwater, groundwater flow field, and Eh were investigated using geothermal groundwater samples. Results showed that (1) the average d value of geothermal water is 5.4, whereas that of the groundwater in normal temperature is 6.04. The differences are induced by the oxygen isotope exchange during the water–rock interaction, which may be more easily completed in geothermal water than in cold groundwater. (2) The d value increases remarkably with the age of the geothermal groundwater. The d value increases from 11.2 to 14.6 when the age of the geothermal water is 12,760 ± 130 a and 38,960 ± 630 a, respectively. Moreover, the isotope heat exchange for composition of the hydrogen and oxygen isotopes in the geothermal groundwater proceeds sufficiently with time. (3) The d value decreases from 5.72 to 3.03 when the depth increases from 125.13 to 3221 m. Generally, in the same area, the d value decreases with depth because the temperature is increasing. (4) The d value of the groundwater gradually reduces from the northern recharge area to the southern discharge area. The average d value is 7.31 in the northern recharge area and 5.68 in the middle Beijing Depression, whereas the d value in the southern area of Fengheying is ?9.20. The larger difference in d values between the recharge and discharge areas is due to the slower velocity of underwater flow, which induces longer time for oxygen exchange. (5) The relationship between the d and Eh is complex. When Eh is <200 mV, the d value of the geothermal water decreases with the decrease in Eh. When Eh is higher than 200 mV, the d value increases slightly with the decrease in Eh. The study of the characteristics of deuterium excess parameters for geothermal water could provide a scientific isotopic evidence for assessment and exploitation measures in geothermal groundwater systems.     

Rotation Center and Horizontal Bearing Capacity of the Bucket Foundation in Soft Ground

In the last 20 years, the bucket foundation has been developed as a new type of offshore platform structure. Because of its short period of application to engineering practices, the theoretical decision on the rotation center and horizontal bearing capacity of the bucket foundation has yet to be agreed. A limit analysis method is used to determine the updated rotation center position and horizontal bearing capacity to evaluate the failure mechanisms of the bucket foundations. The results are compared with numerical simulation and experiments, and also with other theoretical methods. The proposed method can satisfactorily consider the engineering conditions and the result is accurate in determining the rotation center and horizontal bearing capacity.     

Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

Soil phosphorus composition and phosphatase activities along altitudes of alpine tundra in Changbai Mountains,China

Alpine tundra ecosystems have specific vegetation and environmental conditions that may affect soil phosphorus(P) composition and phosphatase activities. However, these effects are poorly understood. This study used Na OH-EDTA extraction and solution31 P nuclear magnetic resonance(NMR) spectroscopy to determine soil P composition and phosphatase activities, including acid phosphomonoesterase(Ac P), phosphodiesterase(PD) and inorganic pyrophosphatase(IPP), in the alpine tundra of the Changbai Mountains at seven different altitudinal gradients(i.e., 2000 m, 2100 m, 2200 m, 2300 m, 2400 m, 2500 m, and 2600 m). The results show that total P(TP), organic P(OP), OP/TP, Na OH-EDTA extracted P and AcP, PD, and IPP activities over the altitude range of 2500–2600 m are significantly lower than those below 2400 m. The dominant extracted form of P is OP(73%–83%) with a large proportion of monoesters(65%–72%), whereas inorganic P is present in lower proportions(17%–27%). The activity of Ac P is significantly positively correlated with the contents of soil OP, total carbon(TC), total nitrogen(TN), and TP(P 0.05), indicating that the Ac P is a more sensitive index for responding P nutrient storage than PD and IPP. Soil properties, P composition, and phosphatase activities decrease with increased altitude and soil p H. Our results indicate that the distribution of soil P composition and phosphatase activities along altitude and Ac P may play an important role in P hydrolysis as well as have the potential to be an indicator of soil quality.     

Variation of Thornthwaite moisture index in Hengduan Mountains,China

The Thornthwaite moisture index, an index of the supply of water(precipitation) in an area relative to the climatic demand for water(potential evapotranspiration), was used to examine the spatial and temporal variation of drought and to verify the influence of environmental factors on the drought in the Hengduan Mountains, China. Results indicate that the Thornthwaite moisture index in the Hengduan Mountains had been increasing since 1960 with a rate of 0.1938/yr. Annual Thornthwaite moisture index in Hengduan Mountains was between –97.47 and 67.43 and the spatial heterogeneity was obvious in different seasons. Thornthwaite moisture index was high in the north and low in the south, and the monsoon rainfall had a significant impact on its spatial distribution. The tendency rate of Thornthwaite moisture index variation varied in different seasons, and the increasing trends in spring were greater than that in summer and autumn. However, the Thornthwaite moisture index decreased in winter. Thornthwaite moisture index increased greatly in the north and there was a small growth in the south of Hengduan Mountains. The increase of precipitation and decrease of evaporation lead to the increase of Thornthwaite moisture index. Thornthwaite moisture index has strong correlation with vegetation coverage. It can be seen that the correlation between Normalized Difference Vegetation Index(NDVI) and Thornthwaite moisture index was positive in spring and summer, but negative in autumn and winter. Correlation between Thornthwaite moisture index and relative soil relative moisture content was positive in spring, summer and autumn, but negative in winter. The typical mountainous terrain affect the distribution of temperature, precipitation, wind speed and other meteorological factors in this region, and then affect the spatial distribution of Thornthwaite moisture index. The unique ridge-gorge terrain caused the continuity of water-heat distribution from the north to south, and the water-heat was stronger than that from the east to west part, and thus determined the spatial distribution of Thornthwaite moisture index. The drought in the Hengduan Mountains area is mainly due to the unstable South Asian monsoon rainfall time.     

Analysis of phenotypic and genetic parameters for growthrelated traits in the half smooth tongue sole, <Emphasis Type="Italic">Cynoglossus semilaevis</Emphasis>

Phenotypic and genetic parameters for growth-related traits in the half-smooth tongue sole, Cynoglossus semilaevis, were estimated in 22 full-sib families produced by normal and neo-male breeding stocks. As phenotypic males with female genotypes, neo-males are harmful in C. semilaevis aquaculture because they reduce overall production. The present study evaluated the difference in the growth-related traits: total length (TL), body weight (BW) and square root of body weight (SQ_BW) at the age of 570 days between normal and neo-male offspring (neo-males used as male parents). The difference in the proportion of females between normal and neo-male offspring was also assessed. Based on the linear mixed model, restricted maximum likelihood (REML) and best linear unbiased prediction (BLUP) were used to estimate various (co)variance components and estimated breeding values (EBVs) of growth-related traits. As a result, all the mean values of the three studied traits were significantly larger in normal offspring than in neo-male offspring. Additionally, the female proportion was significantly larger in normal offspring than in neo-male offspring. Heritability was 0.128±0.066 2 for TL, 0.128±0.065 5 for BW and 0.132±0.062 9 for SQ_BW, all of which were low level heritabilities. The correlation coefficients of EBVs and phenotypic values of the target traits were 0.516 for TL, 0.524 for BW and 0.506 for SQ_BW, all of which were highly significant (P <0.01). Genetic correlations among TL, BW and SQ_BW were positive high (0.921–0.969) and higher than those of phenotype (0.711–0.748), both of which had low standard errors (0.063–0.123 for genotype, and 0.010–0.018 for phenotype). Compared with normal offspring, neo-male offspring have lower breeding values for each studied trait through EBVs comparison. Therefore, neo-male offspring should not be used as broodstock in a C. semilaevis breeding programs.     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

大兴安岭北段图里河地区满克头鄂博组火山岩年代学及地球化学

对大兴安岭北段图里河地区满克头鄂博组火山岩进行了锆石U-Pb年代学及岩石地球化学研究,以便对其岩石成因和构造背景给予制约。流纹岩LA-ICP-MS锆石U-Pb定年结果表明,该地区满克头鄂博组火山岩形成时代为晚侏罗世(157±1Ma)。该组火山岩具有高硅(Si O2=69.09%~75.92%)、富碱(K2O+Na2O=8.04%~9.23%),贫镁、铁、钙的特征,属高钾钙碱性、偏铝质-弱过铝质岩石;稀土元素配分曲线呈轻稀土富集的右倾形式,(La/Yb)N=5.85~13.53,无铕异常或具有较弱的铕负异常;火山岩样品富集Rb、Th、U、K等大离子亲石元素,亏损Nb、Ta、Ti等高场强元素。Mg#值为12.14~31.01,平均值22,Nb/Ta值(6.67~27.17,平均值12.23),Rb/Sr值(0.35~3.63,平均值1.58),显示火山岩岩浆源区为下地壳。依据岩石地球化学特征、构造判别图解,结合区域构造演化特征,认为满克头鄂博组火山岩形成于蒙古—鄂霍茨克洋闭合的造山后伸展背景。