Soil phosphorus composition and phosphatase activities along altitudes of alpine tundra in Changbai Mountains,China

Alpine tundra ecosystems have specific vegetation and environmental conditions that may affect soil phosphorus(P) composition and phosphatase activities. However, these effects are poorly understood. This study used Na OH-EDTA extraction and solution31 P nuclear magnetic resonance(NMR) spectroscopy to determine soil P composition and phosphatase activities, including acid phosphomonoesterase(Ac P), phosphodiesterase(PD) and inorganic pyrophosphatase(IPP), in the alpine tundra of the Changbai Mountains at seven different altitudinal gradients(i.e., 2000 m, 2100 m, 2200 m, 2300 m, 2400 m, 2500 m, and 2600 m). The results show that total P(TP), organic P(OP), OP/TP, Na OH-EDTA extracted P and AcP, PD, and IPP activities over the altitude range of 2500–2600 m are significantly lower than those below 2400 m. The dominant extracted form of P is OP(73%–83%) with a large proportion of monoesters(65%–72%), whereas inorganic P is present in lower proportions(17%–27%). The activity of Ac P is significantly positively correlated with the contents of soil OP, total carbon(TC), total nitrogen(TN), and TP(P 0.05), indicating that the Ac P is a more sensitive index for responding P nutrient storage than PD and IPP. Soil properties, P composition, and phosphatase activities decrease with increased altitude and soil p H. Our results indicate that the distribution of soil P composition and phosphatase activities along altitude and Ac P may play an important role in P hydrolysis as well as have the potential to be an indicator of soil quality.     

Variation of Thornthwaite moisture index in Hengduan Mountains,China

The Thornthwaite moisture index, an index of the supply of water(precipitation) in an area relative to the climatic demand for water(potential evapotranspiration), was used to examine the spatial and temporal variation of drought and to verify the influence of environmental factors on the drought in the Hengduan Mountains, China. Results indicate that the Thornthwaite moisture index in the Hengduan Mountains had been increasing since 1960 with a rate of 0.1938/yr. Annual Thornthwaite moisture index in Hengduan Mountains was between –97.47 and 67.43 and the spatial heterogeneity was obvious in different seasons. Thornthwaite moisture index was high in the north and low in the south, and the monsoon rainfall had a significant impact on its spatial distribution. The tendency rate of Thornthwaite moisture index variation varied in different seasons, and the increasing trends in spring were greater than that in summer and autumn. However, the Thornthwaite moisture index decreased in winter. Thornthwaite moisture index increased greatly in the north and there was a small growth in the south of Hengduan Mountains. The increase of precipitation and decrease of evaporation lead to the increase of Thornthwaite moisture index. Thornthwaite moisture index has strong correlation with vegetation coverage. It can be seen that the correlation between Normalized Difference Vegetation Index(NDVI) and Thornthwaite moisture index was positive in spring and summer, but negative in autumn and winter. Correlation between Thornthwaite moisture index and relative soil relative moisture content was positive in spring, summer and autumn, but negative in winter. The typical mountainous terrain affect the distribution of temperature, precipitation, wind speed and other meteorological factors in this region, and then affect the spatial distribution of Thornthwaite moisture index. The unique ridge-gorge terrain caused the continuity of water-heat distribution from the north to south, and the water-heat was stronger than that from the east to west part, and thus determined the spatial distribution of Thornthwaite moisture index. The drought in the Hengduan Mountains area is mainly due to the unstable South Asian monsoon rainfall time.     

Analysis of phenotypic and genetic parameters for growthrelated traits in the half smooth tongue sole, <Emphasis Type="Italic">Cynoglossus semilaevis</Emphasis>

Phenotypic and genetic parameters for growth-related traits in the half-smooth tongue sole, Cynoglossus semilaevis, were estimated in 22 full-sib families produced by normal and neo-male breeding stocks. As phenotypic males with female genotypes, neo-males are harmful in C. semilaevis aquaculture because they reduce overall production. The present study evaluated the difference in the growth-related traits: total length (TL), body weight (BW) and square root of body weight (SQ_BW) at the age of 570 days between normal and neo-male offspring (neo-males used as male parents). The difference in the proportion of females between normal and neo-male offspring was also assessed. Based on the linear mixed model, restricted maximum likelihood (REML) and best linear unbiased prediction (BLUP) were used to estimate various (co)variance components and estimated breeding values (EBVs) of growth-related traits. As a result, all the mean values of the three studied traits were significantly larger in normal offspring than in neo-male offspring. Additionally, the female proportion was significantly larger in normal offspring than in neo-male offspring. Heritability was 0.128±0.066 2 for TL, 0.128±0.065 5 for BW and 0.132±0.062 9 for SQ_BW, all of which were low level heritabilities. The correlation coefficients of EBVs and phenotypic values of the target traits were 0.516 for TL, 0.524 for BW and 0.506 for SQ_BW, all of which were highly significant (P <0.01). Genetic correlations among TL, BW and SQ_BW were positive high (0.921–0.969) and higher than those of phenotype (0.711–0.748), both of which had low standard errors (0.063–0.123 for genotype, and 0.010–0.018 for phenotype). Compared with normal offspring, neo-male offspring have lower breeding values for each studied trait through EBVs comparison. Therefore, neo-male offspring should not be used as broodstock in a C. semilaevis breeding programs.     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

大兴安岭北段图里河地区满克头鄂博组火山岩年代学及地球化学

对大兴安岭北段图里河地区满克头鄂博组火山岩进行了锆石U-Pb年代学及岩石地球化学研究,以便对其岩石成因和构造背景给予制约。流纹岩LA-ICP-MS锆石U-Pb定年结果表明,该地区满克头鄂博组火山岩形成时代为晚侏罗世(157±1Ma)。该组火山岩具有高硅(Si O2=69.09%~75.92%)、富碱(K2O+Na2O=8.04%~9.23%),贫镁、铁、钙的特征,属高钾钙碱性、偏铝质-弱过铝质岩石;稀土元素配分曲线呈轻稀土富集的右倾形式,(La/Yb)N=5.85~13.53,无铕异常或具有较弱的铕负异常;火山岩样品富集Rb、Th、U、K等大离子亲石元素,亏损Nb、Ta、Ti等高场强元素。Mg#值为12.14~31.01,平均值22,Nb/Ta值(6.67~27.17,平均值12.23),Rb/Sr值(0.35~3.63,平均值1.58),显示火山岩岩浆源区为下地壳。依据岩石地球化学特征、构造判别图解,结合区域构造演化特征,认为满克头鄂博组火山岩形成于蒙古—鄂霍茨克洋闭合的造山后伸展背景。     

危岩崩塌启动机制离心模型试验研究

大型高陡危岩崩塌初始失稳过程短暂,难以在现场进行及时观测并获取有效数据,为此引入离心模型试验。以重庆甑子岩陡崖高陡危岩崩塌为原型,对危岩崩塌启动机制展开研究,获取关键数据,定量化验证甑子岩危岩失稳的关键影响因素,探索危岩崩塌的离心模型试验方法。试验较好地完成了对岩质崩塌初始失稳过程的模拟,当危岩模型底部区域抗压强度为60 kPa时,失稳时刻离心加速度为73g;当抗压强度降至40 kPa时,失稳时刻离心加速度仅为18g;对照组试验证明高陡危岩底部区域强度对其整体稳定性起控制性作用。试验模型中上部岩体的失稳方式与原型具有一定差异,分析认为其原因除试验因素引入外力作用之外,主要是由于模型材料没有考虑原型的节理裂隙与抗拉强度所致,这表明高陡危岩崩塌模式除受底部岩体强度控制外,还与中上部岩体性状密切相关。研究结果可为高陡危岩压裂溃屈失稳机制提供试验依据与数据支撑,对崩塌灾害机理研究具有重要参考。     

Comparison of single- and dual-permeability models in simulating the unsaturated hydro-mechanical behavior in a rainfall-triggered landslide

Landslide-prone slopes in earthquake-affected areas commonly feature heterogeneity and high permeability due to the presence of cracks and fissures that were caused by ground shaking. Landslide reactivation in heterogeneous slope may be affected by preferential flow that was commonly occurred under heavy rainfall. Current hydro-mechanical models that are based on a single-permeability model consider soil as a homogeneous continuum, which, however, cannot explicitly represent the hydraulic properties of heterogeneous soil. The present study adopted a dual-permeability model, using two Darcy-Richards equations to simulate the infiltration processes in both matrix and preferential flow domains. The hydrological results were integrated with an infinite slope stability approach, attempting to investigate the hydro-mechanical behavior. A coarse-textured unstable slope in an earthquake-affected area was chosen for conducting artificial rainfall experiment, and in the experiment slope, failure was triggered several times under heavy rainfall. The simulated hydro-mechanical results of both single- and dual-permeability model were compared with the measurements, including soil moisture content, pore water pressure, and slope stability conditions. Under high-intensity rainfall, the measured soil moisture and pore water pressure at 1-m depth showed faster hydrological response than its simulations, which can be regarded as a typical evidence of preferential flow. We found the dual-permeability model substantially improved the quantification of hydro-mechanical processes. Such improvement could assist in obtaining more reliable landslide-triggering predication. In the light of the implementation of a dual-permeability model for slope stability analysis, a more flexible and robust early warning system for shallow landslides hazard in coarse-textured slopes could be provided.     

Characterization of the mechanical properties of a claystone by nano-indentation and homogenization

Based on the analyses of mineralogical compositions by X-ray diffraction and microstructure by optical microscopy, the Young’ modulus and hardness of a claystone were characterized by the nano-indentation technique and homogenization method. Three distinct microstructural zones are identified in the claystone: clay matrix, a composite matrix of clay and small mineral grains and imbedded quartz grains. The elastic modulus and hardness of different zones were determined by nano-indentation testing. Based on the statistical analysis of nano-indentation results, the spatial mappings and frequency distributions of elastic modulus and hardness of the different zones were obtained. The elastic moduli of main constituent phases of the claystone are then estimated from the nano-indentation tests. These values were further used for the determination of the macroscopic elastic modulus of the claystone using two different homogenization schemes: the dilute scheme and Mori–Tanaka scheme. The predicted values by the homogenization schemes are compared with experimental data obtained from conventional uniaxial compression tests.     

Up-to-date urban rainstorm intensity formulas considering spatial diversity in China

With accelerating urbanization in China, urban waterlogging has had a serious impact on urban sustainable development and citizen welfare. Simple urban rainstorm intensity formulas with a monotonous frequency distribution type cannot meet the practical needs of urban drainage planning and design. This study focuses on the development of urban rainstorm intensity formulas based on spatial diversity in China. Using the annual maximum sampling method, rainstorm data of 607 cities throughout China were collected into a database, with a total of 24,933 rainfall samples (annual observations) under various specified precipitation durations. The database was used to verify that integrating the Pearson III and Gumbel distributions would constitute an optimal theoretical distribution type, owing to its small error and increased fitting precision. Modification and coordination of four important parameters in the rainstorm intensity formula were done using a digital elevation model, which improved the accuracy of the formula. In addition, precipitation distributions in China were treated from the perspective of topographic features to validate the calculations from up-to-date formulas. Accuracy assessment was accomplished using a national code (GB-50014-2006), GIS-based isograms, and authoritative results from the Hydrological Bureau of the Ministry of Water Resources. This work provides a comprehensive foundation for the establishment of an up-to-date rainstorm intensity formula for China, which can be used widely in different cities.