Tracing the exhumation of the Eclogite Zone (Tauern Window,Eastern Alps) by <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating of white mica in eclogites

New radiometric ages from the Subpenninic nappes (Eclogite Zone and Rote Wand – Modereck Nappe, Tauern Window) show that phengites formed under eclogite-facies metamorphic conditions retain their initial isotopic signature, even when associated lithologies were overprinted by greenschist- to amphibolite-facies metamorphism. Different stages of the eclogite-facies evolution can be dated provided ⁴⁰Ar/³⁹Ar dating is combined with micro-structural analyses. An age of 39 Ma from the Rote Wand – Modereck Nappe is interpreted to be close to the burial age of this unit. Eclogite deformation within the Eclogite Zone started at the pressure peak along distinct shear zones, and prevailed along the exhumation path. An age of ca. 38 Ma is only observed for eclogites not affected by subsequent deformation and is interpreted as maximum age due to the possible influence of homogenously distributed excess argon. During exhumation deformation was localised along distinct mylonitic shear zones. This stage is mainly characterised by the formation of dynamically recrystallized omphacite2 and phengite. Deformation resulted in the resetting of the Ar isotopic system within the recrystallized white mica. Flat argon release spectra showing ages of 32 Ma within mylonites record the timing of cooling along the exhumation path, and the emplacement onto the Venediger Nappe. Ar-release patterns and ³⁶Ar/⁴⁰Ar vs.³⁹Ar/⁴⁰Ar isotope correlation analyses indicate no significant ⁴⁰Ar-loss after initial closure, and only a negligible incorporation of excess argon. From the pressure peak onwards, eclogitic conditions prevailed for almost 8–10 Ma.     

Probabilistic modeling of seismically triggered landslides using Monte Carlo simulations

The 2004 Chuetsu earthquakes of Niigata (Japan) triggered numerous landslides, and the most widespread types of landslides were highly disrupted, relatively shallow slides and soil (debris) flows. This paper presented a method to evaluate slope instability using Newmark displacement on a pixel-by-pixel basis in a given area. The proposed method was able to integrate Newmark displacement modeling and Monte Carlo simulations within geographical information systems. In the modeling, an empirical attenuation relationship was utilized to calculate Arias intensity over this study area, and the variability of geotechnical parameters was taken into account to calculate coseismic landslide displacement. Before deriving the displacement from related inputs, the Monte Carlo simulations ran 1,500 times and generated 1,500 displacement values for each grid cell, and then means and standard deviations of displacement were calculated and probabilistic distributions can be obtained. Finally, given 10 cm as a threshold value of displacement, estimated probabilities of displacement exceeding 10 cm were shown as a map of seismic landslide hazards. The resulting hazard map was classified into four categories from very low to high level.     

Slope inclinometers for landslides

Slope inclinometers/indicators are used to determine the magnitude, rate, direction, depth, and type of landslide movement. This information is usually vitally important for understanding the cause, behavior, and remediation of a landslide. However, many inclinometer measurements fail to achieve these intended aims because of lack of appreciation of the many factors that need to be correctly implemented during installation, monitoring, and data reduction to yield useful data. This paper presents some guidelines for understanding, installing, and interpreting slope inclinometers and presents three case histories that illustrate some of the pitfalls that can develop if these guidelines are not followed.     

甘肃省张掖市甘州城区和外围地下水位上升的原因 及其诱发地质灾害的防治对策

根据对地下水的均衡状况、水文地球化学、环境同位素、气象水文条件、地下水流场、区域地质构造变化的研究结果,确定张掖市甘州城区及其外围地下水位上升的主要原因是,地震错断了上部第四系松散层内的隔水层,使中心地带的基底与祁连山区相连的北西向深大断裂带变为导水通道,增大了越流补给量,盆地地下水补给量增加,地下水位大面积上升。关于地下水位上升诱发的地质灾害治理方案的总体思路是,为达到“长治久安”的效果,在城区范围内实施水平排水工程措施,在急需解决城区地下建筑物降水的地段和城区东北部的重灾区实施垂直管井排水工程措施。     

Sedimentary characteristics of terrigenous debris at site MD05-2905 in the northeastern part of the South China Sea since 36 ka and evolution of the East Asian monsoon

Sediments with high sedimentation rate at site MD05-2905 in the Northeastern slope of the South China Sea provide unique materials for a high-resolution study on the paleoenvironment. Based on precise dating of AMS ¹⁴C, grain size analysis of terrigenous debris at core MD05-2905 was conducted after organic matter, biological carbonate and biogenic opal were removed. The results show that 15.5–63.5 μm coarse grain size ingredients may indicate East Asian winter monsoon changes and that 2–9 μm fine grain size ingredients may be used as a proxy of evolution of the East Asian summer monsoon. The results of grain size analysis, which suggest East Asian monsoon intensity, reveal that a winter monsoon dominated the glacial regime and a summer monsoon dominated the Holocene regime. It was also shown that the summer monsoon increased gradually, experienced several abrupt changes and reached a culmination in the early Holocene (11200–8500 a B.P.) since 36 ka. Controlled by precession periodicity, it may be related with the amount of solar radiation at the highest stage, which needs further study. __________ Translated from Advances in Earth Science, 2007, 22(10): 1012–1018 [译自: 地球科学进展]     

煤层气开采对环境的影响

煤层气是一种廉价、洁净、高效的新型能源,其开发利用可以弥补常规天然气和燃油的不足,750m^3煤层气可顶替1t标准煤。煤层气开发对环境的影响主要是减少了煤矿甲烷气体的排放,降低温室效应。其负面影响是在钻探、压裂、回注水和提纯过程中会造成煤层和煤层气中杂质气体和有毒有害物质富集,对大气和地下水造成污染。     

封闭体系有机质与有机碳氢氮恢复动力学研究

在封闭体系的条件下,对典型的Ⅰ、Ⅱ、Ⅲ型干酪根在热演化过程中的损失进行生烃动力学研究,获得了Ⅰ、Ⅱ、Ⅲ型干酪根的总量、有机碳、氢以及氮质量损失动力学参数。用Kinetics软件计算了封闭体系干酪根有机碳丰度、氢碳原子比和氮碳原子比的恢复系数。认为在对高成熟—过成熟干酪根进行生烃评价时,Ⅰ、Ⅲ型干酪根残余有机碳丰度需要进行恢复,而Ⅱ型干酪根残余有机碳丰度不需要恢复。三种类型干酪根的氢碳原子比均需要进行恢复。     

高速公路勘测定界的的方法研究

本文扼要阐述公路勘测定界测绘与其土地报批图件资料制作过程,借用现有商业软件南方"CASS成图系统"和办公系统软件微软"Microsoft Office Excel",成图、制表及图件资料涉及内容,提出应注意问题及建议。     

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.     

The Tau Model for Data Redundancy and Information Combination in Earth Sciences: Theory and Application

Many decision-making processes in the Earth sciences require the combination of multiple data originating from diverse sources. These data are often indirect and uncertain, and their combination would call for a probabilistic approach. These data are also partially redundant with each other or with all others taken jointly. This overlap in information arises due to a variety of reasons—because the data arises from the same geology, because they originate from the same location or the same measurement device, etc. The proposed tau model combines partially redundant data, each taking the form of a prior probability for the event being assessed to occur given that single datum. The parameters of that tau model measure the additional contribution brought by any single datum over that of all previously considered data; they are data sequence-dependent and also data value-dependent. Data redundancy depends on the sequence in which the data is considered and also on the data values themselves. However, for a given sequence, averaging the tau model parameters over all possible data values leads to exact analytical expressions and corresponding approximations and inference avenues. Information on multiple-point connectivity of permeability arrives from core data, well-test data and seismic data which are defined over varying supports with complex redundancy between these information sources. In order to compute these tau weights for determining connectivity, one needs a model of data redundancy, here expressed as a vectorial training image (Ti) constructed using a prior conceptual knowledge of geology and the physics of data measurement. From such a vectorial Ti, the tau weights can be computed exactly. Neglecting data redundancy leads to an over-compounding of individual data information and the possible risk of making extreme decisions.