Hydraulic and flood-loss modeling of levee,floodplain, and river management strategies,Middle Mississippi River,USA

In this investigation, four scenarios were used to quantify the balance between the benefits of levees for flood protection and their potential to increase flood risk using Hazards U.S. Multi-Hazard flood-loss software and hydraulic modeling of the Middle Mississippi River (MMR). The goals of this study were (1) to quantify the flood exposure under different flood-control configurations and (2) to assess the relative contributions of various engineered structures and flood-loss strategies to potential flood losses. Removing all the flood-control structures along the MMR, without buyouts or other mitigation, reduced the average flood stages between 2.3 m (100-year flood) and 2.5 m (500-year), but increased the potential flood losses by $4.3–6.7 billion. Removing the agricultural levees downstream of St. Louis decreased the flood stages through the metro region by ~1.0 m for the 100- and 500-year events; flood losses, without buyouts or other mitigation, were increased by $4.3–6.7 billion. Removing the agricultural levees downstream of St. Louis decreased the flood stages through the metro region by ~1.0 m for the 100- and 500-year events; flood losses, without buyouts or other mitigation, were increased by 155 million for the 100-year flood, but were decreased by $109 million for the 500-year flood. Thus, agricultural levees along the MMR protect against small- to medium-size floods (up to the ~100-year flood level) but cause more damage than they prevent during large floods such as the 500-year flood. Buyout costs for the all the buildings within the 500-year floodplain downstream of urban flood-control structures near St. Louis are ~40% less than the cost of repairing the buildings damaged by the 500-year flood. This suggests large-scale buyouts could be the most cost-effective option for flood loss mitigation for properties currently protected by agricultural levees.     

含钒石煤的穆斯堡尔谱研究

本文收集了我国湘鄂淅地区含钒石煤样品,使用化学分析和穆斯堡尔谱方法,测定和研究了石煤中钒铁的赋存方式和价态,以及不同焙烧温度下钒铁价态变化等。初步研究表明,石煤中钒铁价态及价态变化的测定,对含钒石煤中钒铁矿物和成因研究,钒的提取和石煤的综合利用有重要意义。     

卫星网与地面网联合平差中随机模型的估计

本文讨论了卫星网与地面网联合平差中随机模型误差及其对联合平差结果的影响,应用方差分量估计方法对卫星网和地面网的随机模型进行了估计,并对模拟网与实测网的计算结果进行了分析。     

Geochemical signatures of Mesoproterozoic siliciclastic rocks of the Kaimur Group of the Vindhyan Supergroup,Central India

The Upper Kaimur Group of the Vindhyan Supergroup in Central India, primarily consists of three rock types-DhandraulSandstone, Scarp Sandstone and Bijaigarh Shale. Mineralogically and geochemically, they are quartz arenite, sublitharenite to litharenite and litharenite to shale in composition, respectively. The A-CN-K ternary plot and CIA and ICV values suggest that the similar source rocks suffered severe chemical weathering, under a hot-humid climate in an acidic environment with higher P _{CO 2}, which facilitated high sediment influx in the absence of land plants. Various geochemical discriminants, elemental ratios like K₂O/Na₂O, Al₂O₃/TiO₂, SiO₂/MgO, La/Sc, Th/Sc, Th/Cr, Gd_N/Yb_N and pronounced negative Eu anomalies indicate the rocks to be of post-Archean Proterozoic granitic source, with a minor contribution of granodioritic input, in a passive margin setting. The sediments of the Upper Kaimur Group were probably deposited in the interglacial period in between the Paleoproterozoic and Neoproterozoic glacial epochs.     

Quantitative modeling of groundwater in Satluj River basin of Rupnagar district of Punjab using remote sensing and geographic information system

Water is a fluctuating resource making it difficult to measure in time and in space. To demonstrate the efficiency of the geographic information system (GIS) for groundwater studies, information on the parameters controlling groundwater such as lithology, geomorphology and lineament analysis were analyzed. LISS-III and Landsat satellite image of the area was used to infer information on the geologic lineaments and geomorphology. To delineate linear features enhancement and direction, filtering was performed on single bands of Landsat images. Thematic maps for geology, slope, geomorphology and lineament were prepared and integrated in GIS by assigning the weights and ranking to various parameters controlling the occurrence of groundwater to generate the groundwater potential map for the study area. The results indicate that the floodplain of river and its adjoining areas have very good groundwater potential, whereas the steeply sloping area in the northern part having high relief and slope possesses poor groundwater potential.     

Influence of afforestation on water regime in Jizera Catchments,Czech Republic

This paper studies the influence of afforestation on the water regime in two catchments in the Jizera Mountains that are similar in size and altitude but have different afforestation pattern. In this paper a range of different modelling tools is used to establish whether the differences in catchment water regime can be quantified and attributed to differences in catchment characteristics. Frequency analysis of low and high flows and a number and duration of flows over a threshold value are used to look for the differences in flow regime in both catchments. Low flow conditions are modelled using the Wittenberg nonlinear store approach. A rainfall-runoff process is modelled using a Data Based Mechanistic approach. The results indicate that the differences in the catchment response to external climatic factors outweigh the influence of land use apart from the low flows, where the changes in the response might be attributed to afforestation.     

Evaluating the suitability of different terrains for sustaining human settlements according to the local elevation range in China using the ASTER GDEM

The topographical suitability assessment of human settlements(SAHS) creates a solid foundation for regional population distribution and socio-economic development. Local elevation range(LER) is an important factor that can be used to assess the suitability of different terrains for sustaining human settlements. However, current digital elevation model(DEM)-based LER products suffer from some challenges typically because of their subjectively selected neighborhood scales and coarser spatial resolution. In this study, we initially determined the optimal statistical window and then calculated the appropriate LER with the finer resolution data of the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global DEM(ASTER GDEM) products for China. Then, the appropriate LER was used to evaluate the topographical SAHS and its correlations with the national gridded population distribution(1 km × 1 km) in 2010. The results show that the optimal statistical window for calculating a 1 arc-second(about 30 m) resolution GDEM LER for China can be determined using a 51 × 51 grid unit(width × height) within a rectangular neighborhood, corresponding to an area of about 2.34 km~2. Secondly, the LER values in the southern and western China were greater than those of the north and east, showing a trend which consistently reflects the general spatial features of landforms. Finally, the relationship between GDEM LER and population density was highly correlated with the R~2 value of 0.81. It showed that 85.22% of the Chinese population was located in areas where the LER is lower than 500 m. The topographically suitable area within China decreased from the southeastern coastal zone towards the northwestern inland areas due to transition from plains and basins to plateaus and mountains. The total area of moderate to high suitable level was 423.84 × 10~4 km~2, or 44.15% of the total land area, with 88.17% of the national population. Our study demonstrates the usefulness of appropriate LER in evaluating the topographical SAHS as well as its significant impact on population distribution.     

Analysis of sedimentary facies and depositional environments of Paleogene sequence of Cambay basin,India

A study on the sedimentary facies characterization and depositional environment interpretations for the K#Field (K-Oil Field) in Cambay petroleum basin of western onshore, India was conducted based on the sub-surface data from drilled wells, including well logs, borehole images, cores and the regional knowledge of the basin. In this work, an effort is made to integrate the current data from seismics and well logging, to study and analyze its depositional environments and establish the petroleum systems. The study regions for the present work are K45 and K48 blocks. The target strata includes 2 oil-bearing formations of Paleogene, which is about 3600 ft; they are M#Fm (M-Formation) of the Eocene and N#Fm (N-Formation) of Oligocene, subdivided into 11 zones. The sediment fill is mostly of Tertiary. The research attempts to decipher the oil - depositional source correlation problems of the basin. Sedimentary models were established referring to the core analysis, core photographs and well logs. Reservoir and heterogeneity study included reservoir lithology features, physical properties and pore structure features.Well facies analysis of oil well WELL-0297 and WELL-0129 was done and the results were analyzed for further drilling of new wells for oil and gas exploration. The study found that the Eocene, Oligocene, Miocene and Paleogene are fluviatile facies sand and mud interbed sediment with the thickness 2000-4000 ft, which are main oil-bearing formations in these areas. Studies concluded that the fluvial reservoirs of the K#Field are characterized by large variations from laterally extensive bodies with good interconnectedness and high net-to-gross ratios, multi-storey ribbon bodies with poor interconnections and low net-to-gross ratios.     

Felsic tuff from Rutland Island — A pyroclastic flow deposit in Miocene-sediments of Andaman-Java subduction complex

The bedded felsic tuff exposed in Rutland Island, Andaman, consists of two facies:

Resource allocation for regional earthquake risk mitigation: a case study of Tehran,Iran

This paper presents a new optimization model to help cities in seismically active developing countries decide (1) How much to spend on pre-earthquake mitigation versus waiting until after an event and paying for reconstruction or simply not rebuilding damaged buildings? (2) Which buildings to mitigate and how? and (3) Which buildings to reconstruct and how? It extends previously developed optimization models to consider the particular issues that arise in such countries. First, the model allows for the possibility that some damaged buildings will not be reconstructed immediately and keeps track of any lost building inventory. Second, buildings can be mitigated to, or when damaged, reconstructed to, any appropriate structural type and seismic design level. Finally, the model objectives include minimizing the chance of an extremely high death toll in any one earthquake and minimizing the average annual death toll across earthquakes. The model is illustrated through a case study analysis for Tehran, Iran.