不动产登记信息管理基础平台接入技术机制研究

《不动产登记暂行条例》明确要求建立全国统一的信息平台.各级不动产登记机构的登记信息实时纳入统一的信息平台,形成标准统一、内容全面、覆盖全国、互相关联、实时更新、互通共享的不动产登记数据库体系.本文针对全国各省、市、县不动产登记信息平台不同的建设和运行模式,研究了信息平台接入技术机制,提出了国家级信息平台的接入要求、接入内容、接入机制以及质量控制等内容,形成了信息平台接入技术机制框架,为全国信息平台接入工作提供借鉴.     

Application of the TaiWan Ionospheric Model to single-frequency ionospheric delay corrections for GPS positioning

The performance of a three-dimensional ionospheric electron density model derived from FormoSat3/COSMIC GPS Radio Occultation measurements, called the TaiWan Ionosphere Model (TWIM), in removing the ionospheric delays in single-frequency pseudorange observations is presented. Positioning results using TWIM have been compared with positioning results using other ionospheric models, such as the Klobuchar (KLOB) and the global ionospheric model (GIM). C/A code pseudoranges have been observed at three International GPS Service reference stations that are representative of mid-latitude (BOR1 and IRKJ) and low-latitude (TWTF) regions of the ionosphere. The observations took place during 27 geomagnetically quiet days from April 2010 to October 2011. We perform separate solutions using the TWIM, KLOB, GIM ionospheric models and carry out a solution applying no ionospheric correction at all. We compute the daily mean horizontal errors (DMEAN) and the daily RMS (DRMS) for these solutions with respect to the published reference station coordinates. It has demonstrated that TEC maps generate using the TWIM exhibit a detailed structure of the ionosphere, particularly at low-latitude region, whereas the Klobuchar and the GIM only provide the basic diurnal and geographic features of the ionosphere. Also, it is shown that even for lower satellite elevations, the TWIM provides better positioning than the Klobuchar and GIM models. Specifically, using TWIM, the difference of the uncorrected solution (no ionospheric correction), and the other solutions, relative to the uncorrected solution, is 45 % for the mean horizontal error (DMEAN) and 42 % for the horizontal root-mean-square error (DRMS). Using Klobuchar and GIM, the percent for DMEAN only reaches to about 12 % and 3 %, while the values for the DRMS are only 12 and 4 %, respectively. In the vertical direction, all models have a percentage of about 99 and 70 % for the mean vertical error (VMEAN) and vertical root-mean-square error (VRMS), respectively. These percentages show the greater impact of TWIM on the ionospheric correction compared to the other models. In at least 40 % of the observed days and across all stations, TWIM has the smallest DMEAN, VMEAN, DRMS, and VRMS daily values. These values reach 100 % at station TWTF. This shows the overall performance of TWIM is better than the Klobuchar and GIM.     

Factor of safety in a partially saturated slope inferred from hydro‐mechanical continuum modeling

Rainfall weakens an earth slope and triggers mass movement. Relevant triggering mechanisms are complex and include reduction of capillary pressure due to increased saturation and frictional drag on the sediment induced by fluid flow. Physics‐based continuum models utilizing modern computational tools are useful for understanding the mechanisms of deformation in partially saturated slopes; however, they do not provide a scalar indicator called ‘factor of safety’ that measures the potential of a given slope for mass movement. In the present work, we employ sequential calculations consisting of a physics‐based finite element model that couples solid deformation with fluid flow to quantify the stress and deformation fields in a steep hillside slope subjected to rainfall infiltration. This is followed by a limit‐equilibrium calculation based on the method of slices that evaluates the desired factor of safety. The field condition investigated is similar to the steep experimental catchment CB1 near Coos Bay, Oregon, which failed as a large debris flow from heavy rainfall. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical simulation of a dam break for an actual river terrain environment

A two‐dimensional (2D) finite‐difference shallow water model based on a second‐order hybrid type of total variation diminishing (TVD) approximate solver with a MUSCL limiter function was developed to model flooding and inundation problems where the evolution of the drying and wetting interface is numerically challenging. Both a minimum positive depth (MPD) scheme and a non‐MPD scheme were employed to handle the advancement of drying and wetting fronts. We used several model problems to verify the model, including a dam break in a slope channel, a dam break flooding over a triangular obstacle, an idealized circular dam‐break, and a tide flow over a mound. Computed results agreed well with the experiment data and other numerical results available. The model was then applied to simulate the dam breaking and flooding of Hsindien Creek, Taiwan, with the detailed river basin topography. Computed flooding scenarios show reasonable flow characteristics. Though the average speed of flooding is 6–7 m s^?1, which corresponds to the subcritical flow condition (Fr < 1), the local maximum speed of flooding is 14·12 m s^?1, which corresponds to the supercritical flow condition (Fr ≈ 1·31). It is necessary to conduct some kind of comparison of the numerical results with measurements/experiments in further studies. Nevertheless, the model exhibits its capability to capture the essential features of dam‐break flows with drying and wetting fronts. It also exhibits the potential to provide the basis for computationally efficient flood routing and warning information. Copyright © 2006 John Wiley & Sons, Ltd.     

A modified global model for predicting the tritium distribution in precipitation, 1960–2005

A modified global model for predicting the tritium concentration in precipitation has been developed using the dataset of International Atomic Energy Agency/the World Meteorological Organization (IAEA/WMO) over the period from 1960 to 2005. The tritium concentration in precipitation and its history can be estimated at any location using the model. The modified global model of tritium in precipitation (MGMTP) here presented has higher accuracy than the global model of tritium in precipitation (GMTP) developed by Doney et al. ( 1992 ). The new model is not only more appropriate for a particular station but also applicable for the un‐normalized observations directly. Another advantage of MGMTP is that it can estimate a longer history (from 1960 to 2005) of tritium content in precipitation than GMTP (from 1960 to 1986). The seasonal cycle of tritium in precipitation has also been modelled in the form of a simple cosine function with five parameters. Copyright © 2011 John Wiley & Sons, Ltd.     

Physics of Seismic Source Ⅲ. Statistical Mechanics of Earthquakes

The statistical mechanics of earthquakes adopts the concepts and methodology of statistical mechanics, especially the theory of critical phenomena, in studying the preparation, initiation, propagation and healing of earthquake rupture, which forms a new branch in the physics of seismic source in recent years. This article introduces to the fundamental concepts of the statistical mechanics of earthquakes. The introduction includes the seismic Hamiltonian, percolation model, earthquake rupture nucleation, and Burridge-Knopoff spring-block model. It is pointed out that some of the statistical mechanical models of earthquakes have a sound seismological basis. There is a smooth "transition" from the "classical" theory to the "modern" theory of seismic source.     

三种海产动物油中高度不饱和脂肪酸的提取

采用低温—盐形成法对蓝圆　Ｓｃｏｍｂｅｒｍｏｒｕｓｎｉｐｈｏｎｉｕｓ（Ｃｕｖｉｅｒ）、马鲛鱼Ｄｅｃａｐｔｅｒｎｓｍａｒｕａｄｓｉ（ＴｅｍｍｉｎｃｋｅｔＳｃｈｌｅｇｅｔ）、海蛇三种海产动物油中高度不饱和脂肪酸进行提取，经皂化、冷冻、过滤、酸化、离心等工序反复处理后，可得碘价为２２０～２５０的高度不饱和脂肪酸混和物。探讨了提取过程中的最适工艺条件，并比较了该三种海产动物脂质中的高度不饱和脂肪酸的含量。     

Equivalent linear array approach to array pattern synthesis

An effective method for array radiation pattern synthesis that allows formulation of the synthesis of a desired pattern as an optimization problem is presented. The solution proposed involves matrix operations based on the equivalent computation. The advantage of this approach is that it does not involve any numerical optimization routines-only ordinary matrix operations are required. Illustrations are presented to highlight the various aspects of the method. The proposed algorithm can be used to design arrays of uniformly spaced elements with nonisotropic and unequal radiation patterns     

东风盐场卤水中可溶性糖的研究──Ⅰ、盐田卤水中可溶性糖的季节变化及其与海盐产量和质量之间的关系

对东风盐场9个站位卤水中由藻类植物产生的可溶性糖浓度的变化规律及其与海盐产量和质量之间的关系进行了研究。结果表明，各站位可溶性糖含量的变化范围为0．7－124．3mg／L，以6月份最高，2月份最低；卤水中可溶性糖在111mg／L－215mg／L范围内，结晶盐的产量随卤水中可溶性糖含量的增加而提高，但同时降低了NaCl的含量，并增加了可溶性杂质及水分的含量，从而降低了盐质。初始可溶性糖浓度为111mg／L、137mg／L、160mg／L、193mg／L和215mg／L的25．4°Be’的卤水，在日照下实验12天，其对应结晶盐的NaCl含量分别为91．66％、90．63％、90．48％、90．23％和88．46％，可溶性杂质的含量分别为3．05％、3．32％、3．33％和4．54％。