The Magnetic Field, Horizontal Motion and Helicity in a Fast Emerging Flux Region which Eventually forms a Delta Spot

We studied the behavior of magnetic field, horizontal motion and helicity in a fast emerging flux region NOAA 10488 which eventually forms a δ spot. It is found that the rotation of photospheric footpoints forms in the earlier stage of magnetic flux emergence and the relative shear motion of different magnetic flux systems appears later in this active region (AR). Therefore the emerging process of the AR can be separated into two phases: rotation and shear. We have computed the magnetic helicity injected into the corona using the local correlation tracking (LCT) technique. Furthermore we determined the vertical component of current helicity density and the vertical component of induction electric fields E_z = (V× B)_z in the photosphere. Particularly we have presented the comparison of the injection rate of magnetic helicity and the variation of the current helicity density. The main results are as follows: (1) The strong shear motion (SSM) between the new emerging flux system and the old one brings more magnetic helicity into the corona than the twisting motions. (2) After the maturity of the main bipolar spots, their twist decreases and the SSM becomes dominant and the major contributor of magnetic non-potentiality in the solar atmosphere in this AR. (3) The positions of the maxima of E_z (about 0.1 ∼ 0.2 V cm⁻¹) shift from the twisting areas to the areas showing SSMs as the AR evolved from the rotation phase to the shear one, but no obvious correlation is found between the kernels of Hα flare and E_z for the M1.6 flare in this AR. (4) The coronal helicity inferred from the horizontal motion of this AR amounts to −6 × 10⁴³ Mx². It is comparable with the coronal helicity of ARs producing flares with coronal mass ejections (CMEs) or helicity carried away by magnetic clouds (MCs) reported in previous studies (Nindos, Zhang, and Zhang, 2003; Nindos and Andrews, 2004). In addition, the formation of the δ configuration in this AR belongs to the third formation type indicated by Zirin and Liggett (1987), i.e., collision of opposite polarities from different dipoles, and can be naturally explained by the SSM.     

On the Period Variation of the W UMa-type Contact Binary V502 Ophiuchi

The variation in the orbital period of the W UMa type contact binary V502 Oph is analyzed. The orbital period exhibits a wavelike variation with a periodicity of 23.0 years and an amplitude of △P = 1.24×10~(-6) days superimposed on secular decrease of dP/dt = 1.68×10-7 day per year. The long-term decrease may be accompanied by the contraction of the secondary at a rate of 83 m per year and a mass transfer rate from the primary to the secondary of 4.28×10~8 M per year. The short-term oscillation may be explained by the presence of a third component. Orbital elements of the third body and its possible mass are presented.     

The comparison between allozyme and RAPD makers for the population genetic structure analysis of scallop Chlamys farreri

1INTRODUCTION Since the first use in human genetic research in1966,allozyme has become the most popular genetic marker for population genetics studies for almost all groups of animals and plants(Lewontin and Hubby,1966;Murphy et al.,1996).In the past seve…     

ANALYSIS ON THE SPATIAL DISTRIBUTION VARIATION CHARACTERISTIC OF URBAN HEAT ENVIRONMENTAL QUALITY AND ITS MECHANISM——A Case Study of Hangzhou City

Urban heat environmental quality(UHEQ) is affected by the interacting of weather condition and underlying surface framework of urban area .In the last two decades,many researchers from domestic and overseas have studied many problems at the aspect of urban heat environment such as urban heat islands ,urban air temperature and their rela-tion with urban land cover,city population,air pollution etc,In the recent years,Hangzhou,acting as a center city of Zhejiang Province in China,its urbanization quantum and quantity have both changed greatly,in particular ,representing as business affairs building,resident real property and all kins of specialty market having arisen in built-up zone,Based on Landsat TM images data in 1991 and 1999,urban underlying surface temperature value and Normalized Difference Vegetation Index (NDVI) were calculated using image interpreting and supervised classification technique by remote sensing software ERDAS image 8.4,The relation model between urban underlying surface temperature (UUST )and urban air temperature was setup according to the certain correlation patten .Reference to the relational standard of assessing human comfort and other meteorology data of Hangzhou City in summer,the spatial distribution characteristic and the spatial varia-tion degree of human comfort of heat environmental quality are estimated and mapped on a middle scale,that is ,in six districts of Hangzhou City .Then the paper reveals the main characteristic of spatial variation from 1991 to 1999.Lastly,the change mechanism is analyzed and discussed from the viewpoint of city planning,construction and environmental protec-tion.     

铜川王石凹黑色高岭石粘土岩的成因分析

黑色高岭石粘土岩，是铜川王石凹煤矿石炭纪煤系地层顶部，五号煤层的上部一层稳定的煤矸石。经偏光显微镜及费氏台测试光性特征、化学试验及分析鉴定表明，这是一种由高岭石组成的，成分很纯、颗粒大、结晶良好的高岭石粘土岩。据微量元素含量分析，此高岭石系淡水沉积物。     

Response to Dersarkissian's comments on the structure of the Universe

We found that the structure of the Universe can be characterized by a set of actions ^s . This means that some discontinuous phenomena in the Universe can be considered as large-scale quantum effects. The behaviour of matter on a typical scale is determined by the behaviour of matter on other scales through the interactions.     

The evolution of quasars selected by slitless technique

In former works (Zhouet al., 1983, 1985), a quantitative method have been developed to take the selection effects in the identification of emission lines of quasars into account. It was proved that these selection effects may be the cause of the unevenness in the redshift distribution of quasars. The present work is a continuation and development of former works. We use results given by the surveys with same limit-apparent magnitude and choose the quasars whose absolute magnitudes are within a specific range as the analysing samples. Using the method given in the former papers we may find out the evolutionary parameter in an evolutionary law with form of (1+z) ^y from the best fitting between the calculative and observational redshift distribution. The result of analysis shows that the evolutionary law of quasars selected by slitless technique isp =p ₀(1 + z)^{6.5 ± 1} up toz=2.8. This result coincides with and generalizes the earlier result given by other authors.     

Relationship between footwall composition,crustal contamination,and fluid–rock interaction in the Platreef,Bushveld Complex,South Africa

In the northern limb of the 2.06-Ga Bushveld Complex, the Platreef is a platinum group elements (PGE)-, Cu-, and Ni-mineralized zone of pyroxenite that developed at the intrusion margin. From north to south, the footwall rocks of the Platreef change from Archaean granite to dolomite, hornfels, and quartzite. Where the footwall is granite, the Sr-isotope system is more strongly perturbed than where the footwall is Sr-poor dolomite, in which samples show an approximate isochron relationship. The Nd-isotope system for samples of pyroxenite and hanging wall norite shows an approximate isochron relationship with an implied age of 2.17 ± 0.2 Ga and initial Nd-isotope ratio of 0.5095. Assuming an age of 2.06 Ga, the ɛNd values range from −6.2 to −9.6 (ave. −7.8, n = 17) and on average are slightly more negative than the Main Zone of the Bushveld. These data are consistent with local contamination of an already contaminated magma of Main Zone composition. The similarity in isotope composition between the Platreef pyroxenites and the hanging wall norites suggests a common origin. Where the country rock is dolomite, the Platreef has generally higher plagioclase and pyroxene δ ¹⁸O values, and this indicates assimilation of the immediate footwall. Throughout the Platreef, there is considerable petrographic evidence for sub-solidus interaction with fluids, and the Δ _{plagioclase–pyroxene} values range from −2 to +6, which indicates interaction at both high and low temperatures. Whole-rock and mineral δD values suggest that the Platreef interacted with both magmatic and meteoric water, and the lack of disturbance to the Sr-isotope system suggests that fluid–rock interaction took place soon after emplacement. Where the footwall is granite, less negative δD values suggest a greater involvement of meteoric water. Consistently higher values of Δ _{plagioclase–pyroxene} in the Platreef pyroxenites and hanging wall norites in contact with dolomite suggest prolonged interaction with CO₂-rich fluid derived from decarbonation of the footwall rocks. The overprint of post crystallization fluid–rock interaction is the probable cause of the previously documented lack of correlation between PGE and sulfide content on the small scale. The Platreef in contact with dolomite is the focus of the highest PGE grades, and this suggests that dolomite contamination played a role in PGE concentration and deposition, but the exact link remains obscure. It is a possibility that the CO₂ produced by decarbonation of assimilated dolomite enhanced the process of PGE scavenging by sulfide precipitation.     

The Mordor Alkaline Igneous Complex,Central Australia: PGE-enriched disseminated sulfide layers in cumulates from a lamprophyric magma

The Mordor Alkaline Igneous Complex (MAIC) is a composite intrusion comprising a body of syenite and a funnel-shaped layered mafic–ultramafic intrusion of lamprophyric parentage, the Mordor Mafic–Ultramafic Intrusion or MMUI. The MMUI is highly unusual among intrusions of lamprophyric or potassic parentage in containing primary magmatic platinum-group element (PGE)-enriched sulfides. The MMUI sequence consists largely of phlogopite-rich pyroxenitic cumulates, with an inward dipping conformable layer of olivine-bearing cumulates divisible into a number of cyclic units. Stratiform-disseminated sulfide accumulations are of two types: disseminated layers at the base of cyclic units, with relatively high PGE tenors; and patchy PGE-poor disseminations within magnetite-bearing upper parts of cyclic units. Sulfide-enriched layers at cycle bases contain anomalous platinum group element contents with grades up to 1.5 g/t Pt+Pd+Au over 1-m intervals, returning to background values of low parts per billion (ppb) on a meter scale. They correspond to reversals in normal fractionation trends and are interpreted as the result of new magma influxes into a continuously replenished magma chamber. Basal layers have decoupled Cu and PGE peaks reflecting increasing PGE tenors up-section, due to increasing R factors during the replenishment episode, or progressive mixing of between resident PGE-poor magma and more PGE-enriched replenishing magma. The presence of PGE enriched sulfides in cumulates from a lamprophyric magma implies that low-degree partial melts do not necessarily leave sulfides and PGEs in the mantle restite during partial melting. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Possible chemical structures and biological precursors of different vitrinites in coal measure in Northwest China

Chemical structure of Jurassic vitrinites isolated from the coals in basins in NW China have been checked using solid state ¹³C NMR and flash pyrolysis-GC/MS. Study shows some Jurassic collodetrinites are rich in aliphatic products in pyrolysates, consisting with the high amount of methylene carbon in ¹³C NMR spectra. In contrast, pyrolysates of Jurassic collotelinites are rich in phenols and alkylbenzenes. Also one Pennsylvanian and one Permian vitrinite selected from the Ordos basin, NW China have been checked for comparison. The proportion of aliphatics is low in pyrolysates, and aliphatic carbon peak in ¹³C NMR spectrum of Permian vitrinite is mostly composed of gas-prone carbons compared with collodetrinites in those Jurassic basins. But both pyrolysis and ¹³C NMR data shows the Pennsylvanian vitrinite is not only gas-prone but also oil-prone. Relatively high proportion of long chain aliphatic structure of some Jurassic vitrinite in Junggar, Turpan-Hami basins may be due to the contribution of liptodetrinites, which may be included during the formation of vitrinites. And it seems that suberinite is the most possible precursor of long chain aliphatics in the structure of Jurassic collodetrinite.