The three-dimensional geometry of the heliospheric current sheet

The three-dimensional geometry of the heliospheric current sheet seen from fixed points in interplanetary space is constructed for idealized (sinusoidal) magnetic neutral lines (equators) and for an observed magnetic equator on the basis of the “kinematic method” developed by Hakamada and Akasofu (1982). The cross-sections of the wavy current sheet at distances 1, 2 and 5 a.u. are also constructed for the idealized magnetic neutral lines.     

Effects of atmospheric circulation and boundary layer structure on the dispersion of suspended particulates in the Seoul metropolitan area

Summary A three-dimensional non-hydrostatic numerical model and lagrangian particle model (random walk model) were used to investigate the effects of the atmospheric circulation and boundary layer structure on the dispersion of suspended particulates in the Seoul metropolitan area. Initially, emitted particulate matter rises from the surface of the city towards the top of the convective boundary layer (CBL), owing to daytime thermal heating of the surface and the combined effect of an onshore wind with a westerly synoptic-scale wind. A reinforcing sea-valley breeze directed from the coast toward the city of Seoul, which is enclosed in a basin and bordered by mountains to its east, disperses the suspended particulate matter toward the eastern mountains. Total suspended particulate concentration (TSP) at ground level in the city is very low and relatively high in the mountains. Radiative cooling of the surface produces a shallow nocturnal surface inversion layer (NSIL) and the suspended particulate matter still present near the top of the CBL from the previous day, sinks to the surface. An easterly downslope mountain wind is directed into the metropolitan area, transporting particulate matter towards the city, thereby recycling the pollutants. The particulates descending from the top of the NSIL and mountains, combine with particulates emitted near the surface over the city at night, and under the shallow NSIL spread out, resulting in a maximum ground level concentration of TSP in the metropolitan area at 2300 LST. As those particles move toward the Yellow Sea through the topographically shaped outlet west of Seoul city under the influence of the easterly land breeze, the maximum TSP concentration occurs at the coastal site. During the following morning, onshore winds resulting from a combined synoptic-scale westerly wind and westerly sea breeze, force particulates dispersed the previous night to move over the adjacent sea and back over the inland metropolitan area. The recycled particulates combine with the particulates emitted from the surface in the central part of the metropolitan area, producing a high TSP and again rise towards the top of the CBL ready to repeat the cycle.     

Thorium-234 as a tracer of spatial,temporal and vertical variability in particle flux in the North Pacific

An extensive ²³⁴Th data set was collected at two sites in the North Pacific: ALOHA, an oligotrophic site near Hawaii, and K2, a mesotrophic HNLC site in the NW Pacific as part of the VERTIGO (VERtical Transport In the Global Ocean) study. Total ²³⁴Th:²³⁸U activity ratios near 1.0 indicated low particle fluxes at ALOHA, while ²³⁴Th:²³⁸U ～0.6 in the euphotic zone at K2 indicated higher particle export. However, spatial variability was large at both sites—even greater than seasonal variability as reported in prior studies. This variability in space and time confounds the use of single profiles of ²³⁴Th for sediment trap calibration purposes. At K2, there was a decrease in export flux and increase in ²³⁴Th activities over time associated with the declining phase of a summer diatom bloom, which required the use of non-steady state models for flux predictions. This variability in space and time confounds the use of single profiles of ²³⁴Th for sediment trap calibration purposes. High vertical resolution profiles show narrow layers (20–30 m) of excess ²³⁴Th below the deep chlorophyll maximum at K2 associated with particle remineralization resulting in a decrease in flux at depth that may be missed with standard sampling for ²³⁴Th and/or with sediment traps. Also, the application of ²³⁴Th as POC flux tracer relies on accurate sampling of particulate POC/²³⁴Th ratios and here the ratio is similar on sinking particles and mid-sized particles collected by in-situ filtration (>10–50 μm at ALOHA and >5–350 μm at K2). To further address variability in particle fluxes at K2, a simple model of the drawdown of ²³⁴Th and nutrients is used to demonstrate that while coupled during export, their ratios in the water column will vary with time and depth after export. Overall these ²³⁴Th data provide a detailed view into particle flux and remineralization in the North Pacific over time and space scales that are varying over days to weeks, and 10's–100's km at a resolution that is difficult to obtain with other methods.     

Use of Carbonatites in the Production of Precipitated Calcium Carbonate: A Case Study from Eppawala,Sri Lanka

The study investigates the possibility of using carbonatite in the production of precipitated calcium carbonate (PCC). We made use of fresh apatite-rich carbonatites found at the phosphate mining sites at Eppawala, Sri Lanka. Analyses of the fresh carbonatite were performed with the aid of optical microscopy, powder X-ray diffraction (XRD), atomic absorption spectrophotometry (AAS), UV/visible spectrophotometry (UVVS), and thermo gravimetric analysis (TGA). Quicklime obtained from calcinations of carbonatites was used in synthesizing PCC via a lime-soda process. The end product was analyzed with XRD, TGA, AAS, and UVVS. Results revealed that the most common CO₃ ^2? phase available in fresh carbonatites is calcite (>65%). The Ca-rich CO₃ ^2? phase can be distinguished easily from other available minerals because its mode of occurrence in carbonatite matrix is different to that of other minerals. The results of TGA show that the decomposition of CO₃ ^2? phase initiates at about 340°C, which leads to lower energy consumption during calcinations. Post-magmatic hydrothermal process may have been the cause of the formation of thermally unstable CO₃ ^2? phases. Hydration of quicklime from the carbonatite yields much higher Ca²⁺ in the solution than from marble under the same experimental conditions. The synthesized PCC particles are in the calcite polymorphic form. The purity of PCC varies from 96 to 98 wt%. The maximum precipitable CaCO₃ from 1 g of quicklime is about 1.1 g. Hence, fresh carbonatites has great economic potential for the production of PCC.     

A catalogue of major and trace element data for Icelandic Holocene silicic tephra layers

Tephra layers with Icelandic provenance have been identified across the North Atlantic region in terrestrial, lacustrine, marine and glacial environments. These tephra layers are used as marker horizons in tephrochronology including climate studies, archaeology and environmental change. The major element chemistries of 19 proximally deposited Holocene Icelandic silicic tephra layers confirm that individual volcanic systems have unique geochemical signatures and that eruptions from the same system can often be distinguished. In addition, glass trace element chemistry highlights subtle geochemical variations between tephra layers which appear to have identical major element chemistry and thus allows for the identification of some, if not all, tephra layers previously considered identical in composition. This paper catalogues the compositional variation between the widespread Holocene Icelandic silicic tephra deposits.     

Overview of integrative tools and methods in assessing ecological integrity in estuarine and coastal systems worldwide

In recent years, several sets of legislation worldwide (Oceans Act in USA, Australia or Canada; Water Framework Directive or Marine Strategy in Europe, National Water Act in South Africa, etc.) have been developed in order to address ecological quality or integrity, within estuarine and coastal systems. Most such legislation seeks to define quality in an integrative way, by using several biological elements, together with physico-chemical and pollution elements. Such an approach allows assessment of ecological status at the ecosystem level ('ecosystem approach' or 'holistic approach' methodologies), rather than at species level (e.g. mussel biomonitoring or Mussel Watch) or just at chemical level (i.e. quality objectives) alone. Increasing attention has been paid to the development of tools for different physico-chemical or biological (phytoplankton, zooplankton, benthos, algae, phanerogams, fishes) elements of the ecosystems. However, few methodologies integrate all the elements into a single evaluation of a water body. The need for such integrative tools to assess ecosystem quality is very important, both from a scientific and stakeholder point of view. Politicians and managers need information from simple and pragmatic, but scientifically sound methodologies, in order to show to society the evolution of a zone (estuary, coastal area, etc.), taking into account human pressures or recovery processes. These approaches include: (i) multidisciplinarity, inherent in the teams involved in their implementation; (ii) integration of biotic and abiotic factors; (iii) accurate and validated methods in determining ecological integrity; and (iv) adequate indicators to follow the evolution of the monitored ecosystems. While some countries increasingly use the establishment of marine parks to conserve marine biodiversity and ecological integrity, there is awareness (e.g. in Australia) that conservation and management of marine ecosystems cannot be restricted to Marine Protected Areas but must include areas outside such reserves. This contribution reviews the current situation of integrative ecological assessment worldwide, by presenting several examples from each of the continents: Africa, Asia, Australia, Europe and North America.     

Petrology,isotope characteristics,and K-Ar ages of the Maranhão,northern Brazil,Mesozoic basalt province

Northern Brazil contains remnants of Mesozoic flood basalts and hypabyssal rocks that were apparently emplaced during tectonism related to opening of the Atlantic Ocean. Analyses and new K-Ar ages reveal that this 700x250 km Maranhão province (5°–8°S) has low-Ti basalts (1.1 wt% TiO₂) in the western part that range about 160 to 190 Ma, and high-Ti basalts (3.4–4.4 wt% TiO₂) in the eastern part about 115–122 Ma. Low-Ti basalt compositions are less evolved and have a smaller range, Mg# 62-56, than the high-Ti basalts, Mg# 44–33. General characteristics of the least evolved members of low- and high-Ti groups include, respectively, Zr 100 and 250 ppm, Sr 225 and 475 ppm, Ba 200 and 500 ppm, Nb 10 and 26 ppm, Y 29 and 36 ppm, La/Yb_(n) 4.2 and 8.8, where La_(n) is 30 and 90. Overall compositions resemble the low- and high-Ti basaltic rocks of the Mesozoic Serra Geral (Paraná) province in southern Brazil. The Maranhão low-Ti basalts have more radiogenic Sr and Pb and higher ¹⁸O than the high-Ti basalts. Respectively, low- vs high-Ti: _Sr26–54 vs 15–18; ²⁰⁶Pb/²⁰⁴Pb=18.25–.78 vs 18.22–.24; and ¹⁸O 8.9–12.6 vs 6.5–8.6. Nd isotopes overlap: _Nd–1.6 to –3.8 vs –2.1 to –3. Ages, compositions, and isotopes indicate that the low- and high-Ti groups had independent parentages from enriched subcontinental mantle. However, both groups can be modeled from one source composition if low-Ti basalt isotopes reflect crustal contamination, and if the parentages for each group were picritic liquids that represent either higher (for low-Ti) or lower (for high-Ti) percentages of melting of that single source. When comparing Pb isotopes of Maranhão and Serra Geral high-Ti basalts (uncontaminated) to evaluate the DUPAL anomaly, Maranhão has Pb 7/4=4.6–11, and Pb 8/4=72–87; Serra Geral has Pb 7/4=10–13, and Pb 8/4=95–125. The small difference is not enough to conform to DUPAL contours, and is inconsistent with large-scale isotopic heterogeneity of mantle beneath Brazil prior to rifting of South America from Africa. Maranhão low-Ti magmas probably relate to the opening of central North Atlantic, and high-Ti magmas to the opening of equatorial Atlantic. The proposed greater percentage of source melting for low-Ti basalts may reflect a Triassic-Jurassic hotspot, while lesser melting for high-Ti magmas may relate to Cretaceous decompressional (rifting) melting.     

The Scale Matcher: a procedure for assessing scale compatibility of spatial data and models

It is becoming easier to combine environmental data and models to provide information for problem-solving by environmental policy analysts, decision-makers, and land managers. However, the scale dependencies of each of these (data, model, and problem) can mean that the resulting information is misleading or even invalid. This paper describes the development of a systematic framework (dubbed the ‘Scale Matcher’) for identifying and matching the scale requirements of a problem with the scale limitations of spatial data and models.

The Scale Matcher framework partitions the complex array of scale issues into more manageable components that can be individually quantified. First, the scale characteristics of data, model, and problem are separated into their scale components of extent, accuracy, and precision, and each is associated with suitable metrics. Second, a comprehensive set of pairwise matches between these components is defined. Third, a procedure is devised to lead the user through a process of systematically comparing or matching each scale component. In some cases, the matches are simple comparisons of the relevant metrics. Others require the combination of data variability and model sensitivity to be investigated by randomly simulating data and model imprecision and inaccuracy. Finally, a conclusion is drawn as to the scale compatibility of the Data–Model–Problem trio based on the overall procedure result. Listing the individual match results as a set of scale assumptions helps to draw attention to them, making users more aware of the limitations of spatial modelling.

Application of the Scale Matcher is briefly illustrated with a case study, in which the scale suitability of two sources of soil map data for identifying areas of vulnerability to groundwater pollution was tested. The Scale Matcher showed that one source of soil map data had unacceptable scale characteristics, and the other was marginal for addressing the problem of nitrate leaching vulnerability. The scale-matching framework successfully partitioned the scale issue into a series of more manageable comparisons and gave the user more confidence in the scale validity of the model output.     

下地壳基性麻粒岩流变强度实验研究

镁铁质基性麻粒岩被认为可能是大陆下地壳的主要组成岩石[1,2],涉及当前地球动力学研究中地壳变形和高原隆升,壳幔边界的力学耦合与拆离,底侵和拆沉作用等一系列地球动力学问题阳[3,4],具有重要的地球动力学意义.大陆下地壳的流变学性质是我们深入认识这些地球深部过程的关键点之一.