Soil column infiltration tests on biomediated capillary barrier systems for mitigating rainfall-induced landslides

Rainfall-induced landslide is a common geohazard in tropical and humid regions. Capillary barrier system (CBS) is a popular and widely studied mitigating measure for rainfall-induced landslides. However, several previous studies have shown that the performance of the conventional CBS under intense rainfalls has not been particularly convincing. This paper aims to explore the feasibility and effectiveness of a newly proposed system, known as “biomediated capillary barrier system” (B-CBS) in minimizing water infiltration into soil. A one-dimensional soil column was used to investigate the infiltration characteristics of the proposed system. The results showed that the B-CBS of biomediated residual soil overlying original residual soil (Test IV) could effectively control the infiltration into soil by taking advantage of the less-permeable biomediated soil cover. The B-CBS of biomediated residual soil overlying gravelly sand (Test V) and the three-layered B-CBS of fine sand overlying gravelly sand and biomediated residual soil (Test VI) showed the best performance in terms of minimizing the water infiltration. A suction of about 5 kPa still remained in the soil column after 60 min of infiltration from the ponded water on the soil surface.     

Laboratory investigations of inert gas flow behaviors in compact sandstone

The seepage evolution behavior of compact rock is significant for the stability and safety of many engineering applications. In this research, both hydrostatic and triaxial compression tests were conducted on compact sandstone using an inert gas, namely argon. A triaxial compression test with a water permeability measurement was carried out to study the difference between the gas permeability and water permeability evolutions during the complete stress–strain process. Based on the experimental data, the hydrostatic stress-dependent gas permeability was discussed firstly. A second-order function was proposed to predict and explain the gas slippage effect. The mechanical properties and crack development of the sandstone samples were discussed to better understand the permeability evolution with crack growth during the complete stress–strain process. The results show that the gas permeability evolution can be divided into five stages according to the different crack growth stages. Then, the permeability changes in the crack closure stress \( \sigma_{\text{cc}} \), crack initiation stress \( \sigma_{\text{ci}} \), crack damage stress \( \sigma_{\text{cd}} \) and peak stress \( \sigma_{\text{p}} \) with confining pressures were analyzed. Finally, we found that the difference between the corrected gas permeability and water permeability can be attributed to the interaction between the water and sandstone grains.     

Mechanical behavior and micro-structure of cement kiln dust-stabilized expensive soil

In this study, the effects of cement kiln dust (CKD) on the swelling properties, strength properties, and microstructures of CKD-stabilized expansive soil were investigated. Samples were prepared and stabilized with different CKD content ratios, ranging from 0 to 18% by dry mass. The results obtained show that the maximum swelling pressures decrease exponentially with increases in CKD content. Both the cohesion and unconfined compressive strength (UCS) increase at ratios below 10% CKD and then decrease slightly, above that ratio. CKD can also improve the strength of saturated, expansive soil. There is no visible change of UCS for soil without CKD when cured, while the UCS of a sample with 10% CKD content after curing for 90 days is higher than that after curing for only 1 day. This indicates that CKD can improve the long-term strength of expansive soil. Finally, microstructure analysis reveals that the addition of CKD reduces the montmorillonite content of expansive soil and decreases its swelling properties. The addition of CKD also changes the pore volume distribution, both the size and amount of macro-pores and micro-pores decrease with increase in CKD content. For saturated samples, the size of macro-pores is obviously reduced, while that of micro-pores is slightly increased for both treated and untreated soils. Hydration and saturation processes make the soil structure become dispersive which results in a lower strength, and adding CKD can restrain this process. The suggested optimal CKD content is between 10 and 14% and with a curing time of more than 27 days.     

Advances and Issues in Luminescence Dating of Loess Deposits in Arid Central Asia

High-resolution loess deposits are widely distributed in Arid Central Asia (ACA) and provide important records associated with dust transportation, paleoenvironmental and paleoclimatic evolution. The chronology is the foundation of the research into loess deposits as an environmental archive. In recent decades, the gradually developed optical dating method has been increasingly matured and become an important approach to establishing the loess-paleosol sequences. Here, we summarized and discussed previous work on loess chronology mainly based on optical dating approach in ACA. The following understandings have been listed: ① In comparison with optical dating method, the suitable material for ¹⁴C dating is uncommon in ACA. However, the dating range of luminescence dating is more extensive, and the dating materials are accessible. Thus, the optical dating is widely applicable in the establishment of loess framework in this area. ② Until now, the quartz Single Aliquot Regeneration (SAR) method can be applied to the establishment of loess-paleosol sequence since last glacial period. But several issues remain unaddressed. For example, the Optically Stimulated Luminescence (OSL) signal sensitivity of quartz grains are low in some areas. Furthermore, the results of OSL dating of different grain sizes within a single sample are inconsistent in some areas. The solution of these problems still requires more methodological research. ③ The post-IR IRSL (pIRIR) and multiple elevated temperature stimulation (MET-pIRIR) protoCols of feldspar have basically overcome the anomalous fading issue in the traditional IRSL dating process. In ACA, the framework since MIS 7 can be established with K-feldspar luminescence dating method. Compared with quartz luminescence characteristics, the K-feldspar luminescence signals are more sensitive and exhibit a high saturation level. In specific applications, it is necessary to establish the age frame according to the luminescence sensitivity, the age of samples or other factors.     

2021年6-9月广西异常高温成因分析

2021年6-9月广西经历了1951年以来最高的月平均气温,大范围高温天气频发.利用1961-2021年广西国家地面气象观测站日平均气温和日最高气温观测资料、1991-2021年ERA5再分析资料和西太平洋副热带高压指数资料,对此次广西异常高温的特征和成因进行了研究分析.结果 表明,气候变暖是导致此次高温事件的重要气候背景,西太平洋副热带高压异常偏强位置偏西偏北、中纬度西风带扰动影响偏北以及热带气旋影响偏弱是造成广西气温异常偏高的主要原因.     

气象科学“内卷”了吗?

新中国气象科学经过70年的快速发展,已经触摸到了世界前沿。从20世纪中叶开始的长时间“跟跑”和中国具有世界上最高、尺度最大的地形等带来的气象预报复杂性问题,或许在21世纪20年代到来时,“内卷”带来的挑战会更严峻:在全球气象进入“准停滞期”等待突破时,我们还很少有领跑的机会和经验。     

Network-based triple-frequency carrier phase ambiguity resolution between reference stations using BDS data for long baselines

Network-based ambiguity resolution (AR) between reference stations is the prerequisite to realize a precise real-time kinematic positioning service. With the help of BDS triple-frequency signals, we can efficiently deal with the ionospheric delay and tropospheric delay, and achieve rapid and reliable AR. To overcome the inaccurate ionospheric delay estimated by the geometry-free three carrier ambiguity resolution (GF TCAR) technique, which leads to failure in the original ambiguity resolution, we propose an ionospheric-free (IF) TCAR method to resolve the ambiguity between the reference stations over long baselines. Taking full advantage of the known positions of the reference stations, the easily resolved extra-wide-lane (EWL) ambiguity, and the IF phase combinations, we can reliably fix the wide-lane (WL) ambiguity. A Kalman filter is applied to estimate precise IF ambiguities and the original ambiguity is resolved with the fixed WL ambiguity. A numerical analysis with triple-frequency BDS data from three long baselines of a CORS network is provided to compare the AR performance of GF TCAR with that of IF TCAR. The results show that both methods can reliably resolve the WL ambiguity with a remarkable correctly-fixed rate of higher than 99%, and the reliably-fixed rates of the IF TCAR slightly increase from 92.19, 94.67 and 94.61–98.26, 99.54 and 97.51% for the three baselines. Herein “correctly-fixed” and “reliably-fixed” mean the difference between the float ambiguity and the true one are less than ± 0.5 and ± 0.25 cycles, respectively. On the other hand, the AR performance of the original signals with the IF TCAR method is much better than that with the GF TCAR method attaining a 100% correctly-fixed rate, while the GF TCAR method can hardly fix the original ambiguity with the largest bias being as much as 4 cycles because of the amplified systematic bias.     

Position-domain integrity risk-based ambiguity validation for the integer bootstrap estimator

Integrity monitoring for ambiguity resolution is of significance for utilizing the high-precision carrier phase differential positioning for safety–critical navigational applications. The integer bootstrap estimator can provide an analytical probability density function, which enables the precise evaluation of the integrity risk for ambiguity validation. In order to monitor the effect of unknown ambiguity bias on the integer bootstrap estimator, the position-domain integrity risk of the integer bootstrapped baseline is evaluated under the complete failure modes by using the worst-case protection principle. Furthermore, a partial ambiguity resolution method is developed in order to satisfy the predefined integrity risk requirement. Static and kinematic experiments are carried out to test the proposed method by comparing with the traditional ratio test method and the protection level-based method. The static experimental result has shown that the proposed method can achieve a significant global availability improvement by 51% at most. The kinematic result reveals that the proposed method obtains the best balance between the positioning accuracy and the continuity performance.     

Analysis of estimated satellite clock biases and their effects on precise point positioning

This study provides a systemic analysis to identify the biases in estimated satellite clocks and illustrates their effects in precise point positioning (PPP). First, the precise satellite clock estimation method considering pseudorange and carrier phase hardware delays is derived. Two methods for satellite clock estimation are compared, and their equivalency is discussed. The results show that apart from the well-known constant code hardware biases, the time-variant phase hardware biases are also absorbed by the estimated clocks. Also, the satellite clocks contain biases caused by modeling errors. To analyze the effects of these biases, they are grouped into initial clock biases (ICBs) and time-dependent biases (TDBs). Then, a detailed analysis of the impact of the biases on PPP-based troposphere and coordinate estimates is conducted. The experimental analysis demonstrates that TDBs affect positioning and tropospheric estimates, and their impacts are more significant in the static mode. The ICBs affect coordinate accuracy, zenith total delay mean bias, and its standard deviations only at the millimeter level for kinematic and static PPP, which is negligible. However, the ICBs affect the convergence period for both static and real kinematic PPP, and the magnitude of their impact largely depends on data quality. Note that satellites clocks are generally estimated with the P1/P2 and L1/L2 ionospheric-free combinations, and that hardware-specific parts of ICBs and TDBs cancel if users employ the same type of observables as the clock providers. Otherwise, the effects of biases cannot be ignored, especially for triple-frequency applications. Also, modeling-specific parts of ICBs and TDBs are significant in real-time clocks, which also affect user applications. Our conclusion is applicable for understanding the effects of these biases.