Numerical simulation of groundwater flow and contamination transport in Nahavand plain aquifer,west of Iran

Numerical simulation of groundwater flow used for the estimation of hydraulic and hydrologic parameters which is an important tool for the management of aquifers. This study presents the results of a mathematical model developed for the simulation of groundwater flow in Nahavand plain aquifer in the southwest Hamadan province. For this purpose Groundwater Modeling Software (GMS) was used which supports the MODFLOW-2000 code. After gathering required data such as the hydrological, hydrogeological and topography maps, a 3D hydrogeological model of plain was constructed with borehole and surface elevation data. Then MODFLOW was used for simulation of flow. After initial simulation of the flow, the model was calibrated in steady state with trial-and-error and parameter estimation methods the observed head of groundwater table monitoring data of 1997. Results of calibration show that error between observed head and computed head is in allowable range. Also results of computed head with model show that groundwater flow is in the direction of the dominate slope (southeast to northwest). Finally MODPATH code which simulates advective transport of particles was used for estimation of flow path and source of contaminants.     

Adaptive neuro-fuzzy selection of the optimal parameters of protective spur dike

This study proposes a new approach for determining optimum dimensions of protective spur dike to mitigate scour amount around existing spur dikes. The main objective of this article was to predict the most optimum values of the protective spur dikes to reach the best performance. To predict the protective spur dike parameters for scour controlling around spur dikes, this paper constructed a process which selects the optimal protective spur dike parameters in regard to actual length of the protective spur dike, actual length of the main spur dikes, distance between the protective spur dike and the first spur dike, angle between protective spur dike and flow direction, flow intensity and median size of bed sediments with adaptive neuro-fuzzy (ANFIS) method. To build a protective spur dike with the best features, it is desirable to select and analyze factors that are truly relevant or the most influential to the spur dike. This procedure is typically called variable selection, and it corresponds to finding a subset of the full set of recorded variables that exhibits good predictive abilities. In this study, architecture for modeling complex systems in function approximation and regression was used, based on using ANFIS. Variable searching using the ANFIS network was performed to determine how the five factors affect the protective spur dike. Experimental model of the protective spur dike was used to generate training and checking data for the ANFIS network.     

Video-monitoring of wood discharge: first inter-basin comparison and recommendations to install video cameras

Wood in rivers plays a major role both ecologically and morphologically. In recent decades, due to human activities in the river channels and along the riparian zone, wood obstruction and jamming has exacerbated flooding hazards and infrastructure damage. Therefore, it is necessary to quantify the wood flux and discharge in rivers to improve wood hazard management. Among the various methods for monitoring the wood flux in a river, the streamside videography technique is effective given its high temporal and spatial resolution. Previous work monitored the wood discharge (m³/s) using this technique in the Ain River (France) during three floods (MacVicar and Piégay, 2012), and the same method is implemented on the Isère River (France) to obtain the statistics of wood discharge for two floods. Comparison between the two sites supports the generalization of both the monitoring technique and the link between wood discharge and flood characteristics. We first show that the maximum wood discharge is observed at bankfull discharge, and we confirm the three stage model proposed by MacVicar and Piégay (2012). Additionally, transverse distributions of the number of wood pieces and corresponding wood length appear to be similar for different flood magnitudes on each site. As a technical contribution, the use of the same technique on two sites allows for recommendations on key decisions related to the location and implementation of the equipment. Both statistical and technical contributions can be used by decision makers to implement this monitoring technique, acquire the wood transport parameters, and evaluate the potential wood hazards at local scale or along a river. © 2020 John Wiley & Sons, Ltd.     

Temporal trends and spatial characteristics of drought and rainfall in arid and semiarid regions of Iran

Drought, a normal recurrent event in arid and semiarid lands such as Iran, is typically of a temporary nature usually leaving little permanent aftermath. In the current study, the rainfall and drought severity time series were analyzed at 10 stations in the eastern half of Iran for the period 1966–2005. The drought severity was computed using the Standardized Precipitation Index (SPI) for a 12‐month timescale. The trend analyses of the data were also performed using the Kendall and Spearman tests. The results of this study showed that the rainfall and drought severity data had high variations to average values in the study period, and these variations increased with increasing aridity towards the south of the study area. The negative serial correlations found in the seasonal and annual rainfall time series were mostly insignificant. The trend tests detected a significant decreasing trend in the spring rainfall series of Birjand station at the rate of 8.56 mm per season per decade and a significant increasing trend in the summer rainfall series of Torbateheydarieh station at the rate of 0.14 mm per season per decade, whereas the rest of the trends were insignificant. Furthermore, the 12‐month values of the standardized precipitation index decreased at all the stations except Zabol during the past four decades. During the study period, all of the stations experienced at least one extreme drought which mainly occurred in the winter season. Copyright © 2011 John Wiley & Sons, Ltd.     

Adsorption of BTEX on Surfactant Modified Granulated Natural Zeolite Nanoparticles: Parameters Optimizing by Applying Taguchi Experimental Design Method

In this paper, a novel adsorbent developed by means of granulating of natural zeolite nanoparticles (i.e., clinoptilolite) was evaluated for possible removal of the petroleum monoaromatics (i.e., benzene, toluene, ethylbenzene, and xylene, BTEX). To do this, the natural zeolite was ground to produce nanosized particulate, then modified by two cationic surfactants and granulated. The effect of various parameters including temperature, initial pH of the solution, total dissolved solids (TDS), and concentration of a competitive substance (i.e., methyl tert‐butyl ether, MTBE) were studied and optimized using a Taguchi statistical approach. The results ascertained that initial pH of the solution was the most effective parameter. However, the low pH (acidic) was favorable for BTEX adsorption onto the developed adsorbents. In this study, the experimental parameters were optimized and the best adsorption condition by determination of effective factors was chosen. Based on the S/N ratio, the optimized conditions for BTEX removal were temperature of 40°C, initial pH of 3, TDS of 0 mg/L, and MTBE concentration of 100 µg/L. At the optimized conditions, the uptake of each BTEX compounds reached to more than 1.5 mg/g of adsorbents.     

Land use and land cover classification over a large area in Iran based on single date analysis of satellite imagery

Accelerated soil erosion, high sediment yields, floods and debris flow are serious problems in many areas of Iran, and in particular in the Golestan dam watershed, which is the area that was investigated in this study. Accurate land use and land cover (LULC) maps can be effective tools to help soil erosion control efforts. The principal objective of this research was to propose a new protocol for LULC classification for large areas based on readily available ancillary information and analysis of three single date Landsat ETM+ images, and to demonstrate that successful mapping depends on more than just analysis of reflectance values. In this research, it was found that incorporating climatic and topographic conditions helped delineate what was otherwise overlapping information. This study determined that a late summer Landsat ETM+ image yields the best results with an overall accuracy of 95%, while a spring image yields the poorest accuracy (82%). A summer image yields an intermediate accuracy of 92%. In future studies where funding is limited to obtaining one image, late summer images would be most suitable for LULC mapping. The analysis as presented in this paper could also be done with satellite images taken at different times of the season. It may be, particularly for other climatic zones, that there is a better time of season for image acquisition that would present more information.     

A GIS‐based multi‐criteria seismic vulnerability assessment using the integration of granular computing rule extraction and artificial neural networks

This study proposes multi‐criteria group decision‐making to address seismic physical vulnerability assessment. Granular computing rule extraction is combined with a feed forward artificial neural network to form a classifier capable of training a neural network on the basis of the rules provided by granular computing. It provides a transparent structure despite the traditional multi‐layer neural networks. It also allows the classifier to be applied on a set of rules for each incoming pattern. Drawbacks of original granular computing (GrC) are covered, where some input patterns remained unclassified. The study was applied to classify seismic vulnerability of the statistical units of the city of Tehran, Iran. Slope, seismic intensity, height and age of the buildings were effective parameters. Experts ranked 150 randomly selected sample statistical units with respect to their degree of seismic physical vulnerability. Inconsistency of the experts' judgments was investigated using the induced ordered weighted averaging (IOWA) operator. Fifty‐five classification rules were extracted on which a neural network was based. An overall accuracy of 88%, κ = 0.85 and R² = 0.89 was achieved. A comparison with previously implemented methodologies proved the proposed method to be the most accurate solution to the seismic physical vulnerability of Tehran.     

“Phasic” metropolitan settlers: a phase-based model for the distribution of households in US metropolitan regions

In this article, we develop a model for explaining spatial patterns in the distribution of households across metropolitan regions in the United States. First, we use housing consumption and residential mobility theories to construct a hypothetical probability distribution function for the consumption of housing services across three phases of household life span. We then hypothesize a second probability distribution function for the offering of housing services based on the distance from city center(s) at the metropolitan scale. Intersecting the two hypothetical probability functions, we develop a phase-based model for the distribution of households in US metropolitan regions. We argue that phase one households (young adults) are more likely to reside in central city locations, whereas phase two and three households are more likely to select suburban locations, due to their respective housing consumption behaviors. We provide empirical validation of our theoretical model with the data from the 2010 US Census for 35 large metropolitan regions.     

The crystalline complexes of Hamadan (Sanandaj–Sirjan zone, western Iran): metasedimentary Mesozoic sequences affected by Late Cretaceous tectono-metamorphic and plutonic events

The Hamadan area is characterised by various metamorphic rocks where the slates yielded Jurassic fossils. The entire column, representing the Mesozoic from at least the Jurassic to the Mid-Cretaceous, has been affected by tectono-metamorphic events and the emplacement of Late Cretaceous granitic rocks. A timing of these events is based on the ⁴⁰K–⁴⁰Ar ages carried mainly on separated amphiboles, biotites and muscovites, and interpreted as the ages of their isotopic closure. Results are ranging between 91 and 70 Ma. To cite this article: A. Baharifar et al., C. R. Geoscience 336 (2004).

Résumé

La région de Hamadan expose des roches métamorphiques dont les termes les moins transformés contiennent des fossiles jurassiques. Au cours du Crétacé supérieur, elle a été affectée par un événement tectono-métamorphique régional et elle a été le siège d'une activité plutonique. Les résultats des datations ⁴⁰K–⁴⁰Ar des amphiboles et des micas séparés des roches métamorphiques et plutoniques qui s'étagent entre 91 et 70 Ma montrent l'importance de ces événements et leur étalement au cours du Crétacé supérieur. Pour citer cet article : A. Baharifar et al., C. R. Geoscience 336 (2004).