A multi‐level parallelized substructuring‐frontal solution for coupled thermo/hydro/mechanical problems in unsaturated soil

This paper proposes a multi‐level parallelized substructuring–frontal combined algorithm for the analysis of the problem of thermo/hydraulic/mechanical behaviour of unsaturated soil. Temperature, displacement, pore water pressure and pore air pressure are treated as the primary variables in a non‐linear analysis. Details are given firstly of the substructuring–frontal combined approach. The incorporation of the algorithm in a multi‐level parallel strategy is then discussed. The parallel processing can thus be carried out at different substructural levels. The method thus developed impacts, in a positive way, on both computer storage requirement and execution time. Copyright © 2003 John Wiley & Sons, Ltd.     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

颗粒分析用量筒的规格标准和计量标定

文章讨论了国内外用于密度计法颗粒分析用量筒的计量标准的规定，提出了相应的建议和标定方法。     

TRMM卫星微波成像仪分级产品及其反演降水算法

文章叙述了获取定量降水信息的意义，简要介绍了对热带测雨卫星TRMM(Tropical Rainfall Measurement Mission)的仪器、美国国家宇航局提供的微波成像仪TMI(TRMM Microwave Imager)分级产品。对比了物理方法和经验方法反演降水的特点，并对一些经验方法以及倾斜对流系统对反演降水的影响、动态聚类分析、神经网络反演方法的研究成果进行了介绍。     

铜陵地区老鸦岭层状钼矿床铅同位素组成研究

安徽铜陵老鸦岭矿床中二叠系大隆组(P2d)顶部的含矿(钼矿化)黑色页岩以及附近(立新煤矿)同一层位不含矿黑色页岩的实测铅同位素组成分别为：^206Pb/^204Pb20.20～22.37,^207Pb/^204Pb15.67～15.82,^208Pb/^204Pb38.47～38.60和^206Pb/204Pb18.83～20.80,^207Pb/^204Pb15.65～15.76,^208Pb/^204Pb38．84～39．22。对137Ma的放射成因Pb进行校正后的铅同位素组成表明，含矿黑色页岩和不含矿黑色页岩均与燕山晚期火成岩无关，老鸦岭含矿黑色页岩可能具沉积成因。对沉积(约250Ma)以来的放射成因Pb进行校正后的铅同位素组成表明：不含矿黑色页岩的Pb源自上地壳，而含矿黑色页岩的Pb(因而推测其他成矿金属)可能源于上地壳物质(与不含矿黑色页岩的Pb源相似)与下地壳物质的混合。     

人工神经网络在岩体质量分级中的应用

结合四川省金沙江某水电站工程实例，应用BP人工神经网络方法建立3层BP网络模型，选取岩石单轴抗压强度等6个影响因素为输入变量，对坝基复杂岩体进行质量分级。通过机算机Visual C 语言编程实现神经网络模型，进行网络的学习和运算。以神经网络合理结构分析方法选取合理结构，确定合理隐层单元的数量，提高网络测试的精度。对测试结果的分析发现，经过优化的BP网络模型经多次学习后，测试精度提高，结果可靠，取得较好的实际应用效果。     

Seasonal change of ice algal and phytoplankton assemblages in the Nella Fjord near Zhongshan Station, East Antarctica

The ice algal and phytoplankton assemblages were studied from Nella Fjord near Zhongshan Station, East Antarctica from April 12 to December 30, 1992. Algal blooms occurred about 3 cm thick on the bottom of sea ice in late April and mid November to early December respectively, and a phytoplankton bloom appeared in the underlying surface water in mid December following the spring ice algal bloom. The biomass in ice bottom was 1 to 3 orders of magnitude higher than that of surface water. Amphiprora kjellmanii, Berkeleya sp., Navicula glaciei, Nitzschia barkelyi, N. cylindrus /N. curta, N. lecointei and Nitzschia sp. were common in the sea ice temporarily or throughout the study period. The biomass in a certain ice segment was decreased gradually and the dominant species were usually succeeded as the season went on. Nitzschia sublineata and Dactyliosolen antarctica were two seasonal dominant species only observed in underlying water column. The assemblages between bottom of ice and underlying surface water were different except when spring ice algae bloomed. The evidence shows that the ice algal blooms occurred mainly by in situ growth of ice algae, and the phytoplankton bloom was mostly caused by the release of ice algae.     

海沟影响下深水海洋管线成环行为研究

在深水海洋管线的安装过程中,制造工艺的偏差和外部环境的影响易导致管线上不均匀的扭矩分布,在张力的共同作用下,管线在其触地区可能出现“成环”现象,受到严重损伤,而海洋管线的触地区也是海沟集中形成的区域。为了研究海沟对海洋管线成环行为的影响,基于OrcaFlex软件和构建海沟模型的经验公式,建立了深水悬链线立管和海沟的三维数值模型。就海沟轮廓、位置和土壤属性对立管成环行为的影响展开参数分析,并研究了不同工况下成环的临界载荷。研究表明：海沟的产生和扩展、立管相对海沟的合理位置以及土壤参数中海床表面不排水抗剪强度和吸力因子的增加,可有效降低立管成环过程中的最大压缩力和最大弯矩,从而减少成环引起的损伤;临界载荷的分析则有助于对成环的临界条件进行预测,避免成环现象的发生。     

多连通域浮式平台波浪载荷水池模型试验研究

大型多连通域浮式平台的典型代表是大型海上旅游浮式综合体,依据概念设计,开展大型多连通域浮式平台的波浪载荷水池模型试验研究,试验对不同海况下4种典型多连通域浮式平台方案进行波浪载荷测量,包括剖面的垂向弯矩、水平弯矩和扭矩等,通过观察试验现象和分析测量数据,获得了不同方案大型多连通域浮式平台的波浪载荷特性。试验结果表明：由于平台质量大、振动阻尼大,所以高频载荷成分小;平台在自由状态下载荷值基本都小于平台只释放垂荡状态载荷值;在方案四高波高状态下,平台波浪载荷的高频成分包含了波浪的非线性、约束柱与平台之间的耦合、平台自身的高频振动等。研究成果可为大型海上旅游浮式综合体的结构设计提供设计载荷输入,支撑平台的强度校核评估。     

河北唐山地区中寒武统张夏组鲕粒灰岩的岩石学研究

本区张夏组鲕粒灰岩内,广泛见到细径放射鲕和较粗的同心-放射鲕.放射鲕中存在连生体,我们称之“连生鲕”.与赵震等(1984)人工合成的静水鲕对比,区内放射鲕亦系静水条件下生成;因未见长串连生体,仅呈现数鲕(2—4个)连生,表明鲕粒生成后遭到搅动水拆开.由此可以认为,本组鲕粒灰岩属间歇高能成因模式的产物。又按该类岩石显示的成岩特征,可知本区鲕粒灰岩经历过多种成岩环境,至今仍保留较为明显的大气成岩环境的标志.