The study on a new technology of waterway information system

It is a lot limitations to survey and design waterway by the CAD technique,due to timely variation of hydrology and ecology in the complicated estuary area,such as Changjing River estuary.In this paper,the advantages of GIS technique is applied to manage and process the multi kind,multi scale and multi time hydrographic parameters,including water depth,current velocity,tidal,waves,wind speed,temperature and salinity etc.,also to deal with different projection,different scale charts.Meanwhile,in the paper,combination techniques of GIS and CAD has been developed for unification of the charts for efficient management,two-way automatic carts conversion between GIS and CAD,automatic cutting and assemble of a number of Charts,flight path of the projection of spatial data and coordinate transformation.This new technique has been applied to survey and design waterway of Changing River estuary.The result shows that the combination technology of GIS and CAD has application potentiality in the waterway survey and design.     

黄河三角洲北部贝壳堤岛的近期演变

通过不同年代地形图、卫星影像的对比及野外实地测量等,综合分析了黄河三角洲北部开敞型和潮沟型两类贝壳堤岛近50年来的数量和面积变化及其演化特征。结果表明,该区两类贝壳堤岛自20世纪50年代以来在自然和人为因素的共同作用下发生了明显的变化,但其演化特征因岛屿成因的类型差异而各不相同。目前,该区贝壳堤岛群逐渐萎缩,人类活动已成为影响三角洲北部两类贝壳堤岛发育演变的主导因素,特别是潮沟型贝壳堤岛,基本上结束了自然演化的历史,呈现出新的演化特征。     

西湖凹陷平北地区平湖组基于地震多属性的储层预测

始新统平湖组是东海西湖凹陷平北地区最重要的油气储层,但受资料条件的限制,应用常规方法无法进行精细的储层预测,制约了研究区的油气勘探部署和进程。应用地震多属性分析技术,结合测井曲线、岩心、岩性及区域地质资料,对平北地区平湖组的岩相进行了精细解释,并对有利目标区进行了初步预测,结果表明,平北地区平湖组发育潮汐控制的三角洲相和潮坪相两种类型的沉积相,并以三角洲相内的储层发育,砂体连片性好,工区西南部三角洲前缘相发育区为油气勘探的有利目标区。     

The impact of scour processes on a smothered reef system in the Irish Sea

The Irish Sea, like many marine areas, is threatened by anthropogenic activities. In particular the Pisces Reef system, a series of smothered rocky reefs are subject to fishing pressures as a result of their position within a Nephrops norvegicus fishery. In an area of sediment deposition and retention the reefs modify the environment by increasing the energy of near-bottom currents which results in localised scouring. This is the first study to attempt to characterise and investigate the ecological functioning of the Pisces Reef system. A multidisciplinary approach was essential for accurate investigation of the area. To facilitate more effective management of the benthic habitats of the Reef system, this study integrates acoustic, seismic, grab sampling and video ground-truthing methods for benthic habitat discrimination. Orientation of the scour hollows also suggest that seabed features could be used to infer dominant flow regimes such as the Irish Sea Gyre. The data revealed significant geology–benthos relationships. A unique biotope was described for the reef habitat and it was demonstrated that scouring may influence community composition through disturbance mechanisms. This study provides preliminary information required for management of a unique habitat within a uniform region.     

Model Test Study on Ice-Induced Vibrations of Compliant Multi-Cone Structures

For the study on the ice-induced vibration of a compliant mono-cone structure,a series of model tests were performed from 2004 to 2006.In these tests,the ice sheet before the compliant conical structure was found to be failed in two-time breaking.Based on this important finding,model tests study of the ice force on a compliant multi-cone structure were performed from 2006 to 2007.in these tests,the ice sheet broke before each single cone non-simultaneously.The exciting energy of the total ice force was found to be in a wide range of frequencies,and the structure can be easily excited with nonlinear resonance.     

豹纹鳃棘鲈胚胎发育的初步观察

2008年5月20日,对海水网箱养殖的豹纹鳃棘鲈(Plectropomus leopardus Lacépède)亲鱼进行人工催产试验,并对获得的受精卵进行胚胎发育观察,描述其发育各期的形态特征及发育速度.豹纹鳃棘鲈的受精卵呈浮性,透明圆球形,卵径为816.5 μm±15.9 μm,具一直径约145.5 μm的大油球,有些受精卵还含有数个(1～6)小油球.在自然海区水温30.0～31.2℃条件下,胚胎发育时间为16 h32 min.     

湘江长沙段有螺洲滩不同灭螺措施效果评价

为了全面评价和考核湘江长沙段各洲滩近几年来采取的不同灭螺措施对洲滩钉螺(Oncomelania hu-pensis)螺情的影响,采用以系统抽样结合环境抽查的查螺方法,2003～2008年对湘江长沙段20个有螺洲滩进行了跟踪调查.结果表明,2008年与2003年相比,活螺洲滩数、有螺框出现率、钉螺平均密度和活螺率分别下降了40.00%,99.10%,99.74%,51.09%.经统计学处理,各洲滩有螺框出现率(Z=91.560 2,P<0.01)、活螺率(Z=65.133 2,P<0.01)不相同,但年度下降趋势明显.在20个有螺洲滩中,有感染性钉螺分布的洲滩5个,占有螺洲滩总数的25.00%;有感染性钉螺分布的洲滩逐年减少,感染性钉螺的平均密度和感染率逐年降低,2007～2008年所有洲滩无感染性钉螺分布.湘江长沙段有螺洲滩采取的各种防治措施中,药物与环改灭螺相结合的效果远好于单纯的药物灭螺.各种环改灭螺措施,又以抬洲降滩、翻耕垦种的灭螺效果更持久,更彻底.     

珠母贝人工繁育优化技术的研究

在室内水泥池分别进行了移池培育、不同种类附着器、光照强度、水流和冲洗对珠母贝附着幼虫变态和稚贝存活的研究,结果表明:附着密度为2.18个/cm~2±0.50个/cm~2时,移池培育,其变态幼虫密度为0.95个/cm~2±0.13个/cm~2,20 d稚贝存活密度0.41个/~2±0.08个/cm~2,移池培育显著提高附着幼虫变态和稚贝存活;附着板、附着绳、网片、小石块变态幼虫密度分别为0.70个/cm~2±0.08个/cm~2、1.38个/cm~2±0.15个/cm~2、0.97个/cm~2±0.12个/cm~2、1.04个/cm~2±0.28个/cm~2,稚贝存活密度分别为0.36个/cm~2±0.06个/cm~2、0.62个/cm~2±0.07个/cm~2、0.45个/cm~2±0.07个/cm~2、0.60个/cm~2±0.08个/cm~2,附着绳显著提高附着幼虫变态和稚贝存活;光照强度为300～600 lx时变态幼虫密度为0.87个/cm~2±0.07个/cm~2,20 d稚贝存活密度0.45个/cm~2±0.08个/cm~2,强光不利于幼虫的变态和稚贝存活;水流速为2.3 cm/s时变态幼虫密度为1.08个/cm~2±0.07个/cm~2,20 d稚贝存活密度0.87个/cm~2±0.07个/cm~2,冲洗的变态幼虫密度为1.64个/cm~2±0.19个/cm~2,20 d稚贝存活密度1.00个/cm~2±0.12个/cm~2,水流或冲洗显著提高附着幼虫变态和稚贝存活.     

海洋环境下粉煤灰混凝土的抗冻性与抗氯离子渗透性的耦合

针对海洋环境条件,重点研究了粉煤灰混凝土的抗冻性和氯离子渗透性能的相互关系.试验分别研究了水胶比、粉煤灰等量取代水泥掺量大小、引气剂掺量等因素对抗冻性和抗氯离子渗透性能的影响,并与普通混凝土进行了对比.结果表明,粉煤灰不增加混凝土的抗海水冻融耐久性;粉煤灰增加混凝土的抗氯离子渗透性能,但是掺量超过30%,抗氯离子渗透性能下降;粉煤灰对混凝土抗冻性和抗氯离子渗透性的耦合影响在30%左右存在一个最佳掺量.为评估混凝土的抗冻性和氯离子扩散性的耦合性能,提出了新的评价方法--冻渗比(R值方法),并进行了试验验证.SEM和MIP微观分析与R值方法评价的结果是吻合的.     

船载ADCP资料的潮流分离方法在厦门港断面重复走航中的应用

本文运用Candela等提出的潮流分离方法,选用高斯函数作为基函数,采用Matlab程序,首次对厦门港嵩鼓水道的船载ADCP断面重复走航资料进行潮流分离计算．通过对14个计算点的Candela方法计算结果与引进差比关系准调和分析方法计算结果的分析比较可见：（1）两种方法计算所得余流在大、小潮的相关系数分别为0．9882和0．8521,余流相对误差在大、小潮分别为0．065和0．150,而所得余流方向在大、小潮的相关系数分别为0．9982和0．9865,余流方向相对误差在大、小潮分别为0．023和0．027．两种方法计算的余流及其方向的相关性很高（在样本数为14,置信度为α=1％时,相关系数大于0．6610,结果是可信的）,而平均相对误差也很小．（2）对14个计算点的M2、S2、K1、O1、M4和MS4等6个分潮的计算结果（共有84个样本数据）进行分析比较,两种方法计算所得6个分潮的长轴、长轴方向和短轴在大潮的相关系数分别为0．9838、0．8960和0．2335,而在小潮的相关系数分别为0．9656、0．7555和0．2209．这两种方法计算所得6个分潮的长轴、长轴方向和短轴在大潮的平均相对误差分别为0．375、0．071和0．753,而在小潮的平均相对误差分别为0．287、0．254和0．845．两种方法计算的分潮长轴及其方向的相关性很高（在样本数为84,置信度为α=1％时,相关系数大于0．283,结果是可信的）．相应的分潮长轴的相关性略低,但是在样本数为84,置信度为α=5％时,相关系数均大于0．217．可认为在置信度为α=5％时,计算结果是可信的,而平均相对误差则略显较大．综上所述,我们认为采用Candela等的方法对船载ADCP断面重复走航资料进行潮流分离计算是可行的．