Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

台湾海峡1997年8月至1999年8月份海水光学衰减系数的分布特征

利用1997－1999年间8月份台湾海峡的实测资料，分析了海水光学衰减系数的垂直分布类型、水平分布特征。结果表明，台湾海峡海水光学衰减系数的垂直分布类型主要分为5种，大部分随深度而递增；光学衰减系数等值线基本与岸线平行，水平梯度自北向南、自近岸向外海递减，近岸等值线密集，而外海稀疏；影响台湾海峡光学衰减系数的主要因素是县浮物质（主要含浮游生物）和海流运动。     

海洋褐藻胶生产废水的絮凝-氧化处理研究

使用新型高效的絮凝剂Xp，对海洋褐藻胶生产废水进行絮凝，催化氧化处理试验，确定了絮凝剂Xp的最佳使用条件，催化氧化时间和氧化剂用量，结果表明，经本工艺处理后，废水中主要污染物CODcr的去除率达到83．9％，处理后的废水基本达到国家《污水综合排放标准》（GB8978－1996）限定的二级标准。     

人工养殖点带石斑鱼弧菌病病原菌的分离及鉴定

广东、海南两省多个海水网箱养殖场养殖的点带石斑鱼(Epinephelus malabaricus)发生严重的弧菌病,从海南三亚和广东深圳的发病鱼病灶上分离到2株致病性细菌VAL02和VAL00,经人工回接感染实验证明这2株菌引起点带石斑鱼弧菌病,VAL02对点带石斑鱼苗的半致死量是2.25×10~5 cfu/g。经形态及生理生化特征分析,鉴定出VAL02及VAL00均为溶藻弧菌。应用药敏纸片法研究了22种化学疗剂对VAL02及溶藻弧菌标准株的生长抑制作用,发现VAL02对氯霉素、氟哌酸、卡那霉素和乙酰螺旋霉素等产生耐药性,对复方新诺明和环丙沙星等敏感。     

Effect of Sea Level Variation on Tidal Characteristic Values for the East China Sea

1 .IntroductionTheglobalairtemperatureroseabout 0 .5～ 0 .6°Coverthepast 2 0thcentury ,andtheglobalmeansealevelincreasedbyabout2 0cmduringtheperiod .Theregionalmeansealevelriseswiththerisingglobalmeansealevel.Zuoetal.( 1 997)indicatedthatthemeanrisingrateofabsolutemeansealevelalongtheChinacoastontheassumptionofunifiedisostaticdatumis 2mm a .Woodworth( 1 999)analyzedsealevelspanning 1 76 8tothepresentinLiverpool,andobtainedaseculartrendforheperiodupto 1 880of0 .39± 0 .1 7mm a ,andatrendfort…     

Hilbert Transferin Applied to Separation of Waves

The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained.     

Estimation of Water Particle Velocities by Empirical Transfer Function

-In previous and this studies it appears that the linear and nonlinear wave theory can notaccurately and easily predict the water particle velocities.Therefore,different from the theoretical consider-ations,in this study we have attempted to determine the transfer function empirically.Laboratory experi-ments were performed under various wave conditions.The empirical formulas of the transfer function ofthe wave height,angular frequency and water particle velocity were obtained on the basis of these test databy dimensional analysis and regression analysis.In intermediate and deep water depth conditions,thetransfer function was only a function of a nondimensional parameter which is composed of the angular fre-quency,the depth of the velocity gauge under the still water level,water depth and the acceleration of grav-ity.Finally,the empirical formulas were compared with experimental data and observational data formpresent and Cavaleri's(1978)studies.The empirical formulas were found to be in sufficient correl     

厦门湾有色溶解有机物的光吸收特性研究

研究了厦门湾九龙江河口区、西海域、同安湾及东侧水道海水中有色溶解有机物(CDOM)的光吸收特性,分析了CDOM的河口行为,并讨论了CDOM光吸收特性与其荧光性质之间的关系。结果表明,厦门湾表层海水CDOM光吸收系数a(355)的水平分布表现为河口区最高、东侧水道最低、西海域和同安湾介于两者之间,底层水a(355)的分布与表层基本相似,表明陆源河流输入是厦门湾CDOM的主要来源;a(355)的垂直分布为表层高于底层,主要受水文和生物因素控制。厦门湾表层水CDOM光谱斜率S的平均值介于0.014—0.018nm-1,但河口低盐度区S值较小,反映陆源腐殖质的影响。a(355)在河口混合中呈保守行为,表明CDOM具有良好的保守性质。CDOM的吸收系数a(355)与其荧光强度之间表现为较好的相关关系,指示可以用灵敏度更高的荧光方法来研究CDOM的分布和行为。     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.