Numerical simulations of deformation and movement of blocks within North China in response to 1976 Tangshan earthquake

Using methods of discontinuous deformation analysis and finite element (DDA+FEM), this paper simulates dynamic processes of the Tangshan earthquake of 1976, which occurred in the northern North China where its internal blocks apparently interacted. Studies focus upon both the movement and deformation of the blocks, in particular, the Ordos block, and variations of stress states on the boundary faults. The Tangshan earthquake was composed of three events: slipping motions of NNE-striking major fault, NE-striking fault near the northeastern end of the NNE-striking fault, and NW-striking fault on the southeastern side of the NNE-striking fault. Compared with previous studies, our model yields a result that is more agreeable with the configuration of aftershock distributions. A number of data are presented, such as the principle stress field during the earthquake, contours of the maximum shear stress, the strike-slip deformation between blocks near the earthquake focus, time-dependent variations of slips of earthquake-triggered faulting, the maximum slip distance, and stress drops. These results are in accord with the earthquake source mechanism, basic parameters from earthquake wave study, macro-isoseismic line, observed horizontal displacement vectors, etc. The Tangshan earthquake exerted different influences on the adjacent blocks and boundary faults between them, thus resulting in differential movement and deformation. The Ordos block seems to have experienced the small-scale counterclockwise rotation and deformation, but its northeast part, bounded on the east by the Taihangshan and on the north by the Yanshan and Yinshan belts, underwent relatively stronger deformation. The Tangshan earthquake also changed the stress state of boundary faults of the North China, leading to an increase in shear stress and a decrease in normal stress in the NW-trending Zhangjiakou-Penglai fault through Tangshan City and the northern border faults of the Ordos block, and therefore raises the potential risk of earthquake occurrence. This result is supported by the facts that a series of Ms ≥ 6 earthquakes took place at the northern margin of the Ordos block after the Tangshan earthquake.     

Asymmetric one‐storey elastic systems with non‐linear viscous and viscoelastic dampers: Simplified analysis and supplemental damping system design

Investigated is the accuracy in estimating the response of asymmetric one‐storey systems with non‐linear viscoelastic (VE) dampers by analysing the corresponding linear viscous system wherein all non‐linear VE dampers are replaced by their energy‐equivalent linear viscous dampers. The response of the corresponding linear viscous system is determined by response history analysis (RHA) and by response spectrum analysis (RSA) extended for non‐classically damped systems. The flexible and stiff edge deformations and plan rotation of the corresponding linear viscous system determined by the extended RSA procedure is shown to be sufficiently accurate for design applications with errors generally between 10 and 20%. Although similar accuracy is also shown for the ‘pseudo‐velocity’ of non‐linear VE dampers, the peak force of the non‐linear VE damper cannot be estimated directly from the peak damper force of the corresponding linear viscous system. A simple correction for damper force is proposed and shown to be accurate (with errors not exceeding 15%). For practical applications, an iterative linear analysis procedure is developed for determining the amplitude‐ and frequency‐dependent supplemental damping properties of the corresponding linear viscous system and for estimating the response of asymmetric one‐storey systems with non‐linear VE dampers from the earthquake design (or response) spectrum. Finally, a procedure is developed for designing non‐linear supplemental damping systems that satisfy given design criteria for a given design spectrum. Copyright © 2003 John Wiley & Sons, Ltd.     

基于约束点的曲线一致性化简

详细探讨了基于平面上的特征约束点(无论在曲线上还是在曲线外)的曲线化简，并针对各种情况提出了一致性化简的方法。     

利用信噪比削弱GPS多路径效应的研究

由于多路径误差的非时空相关性,使其成为双差模型中较难解除的误差源。本文利用观测值的信噪比对观测值质量进行评价,通过降低受多路径效应影响的观测值的权重,从而达到削减多路径误差的目的。最后通过实验数据解算结果的重复性验证了此方法的有效性和可靠性。     

Continental subduction and exhumation of UHP rocks. Structural and geochronological insights from the Dabieshan (East China)

In the Dabieshan, the available models for exhumation of ultrahigh-pressure (UHP) rocks are poorly constrained by structural data. A comprehensive structural and kinematic map and a general cross-section of the Dabieshan including its foreland fold belt and the Northern Dabieshan Domain (Foziling and Luzenguang groups) are presented here. South Dabieshan consists from bottom to top of stacked allochtons: (1) an amphibolite facies gneissic unit, devoid of UHP rocks, interpreted here as the relative autochton; (2) an UHP allochton; (3) a HP rock unit (Susong group) mostly retrogressed into greenschist facies micaschists; (4) a weakly metamorphosed Proterozoic slate and sandstone unit; and (5) an unmetamorphosed Cambrian to Early Triassic sedimentary sequence unconformably covered by Jurassic sandstone. All these units exhibit a polyphase ductile deformation characterized by (i) a NW–SE lineation with a top-to-the-NW shearing, and (ii) a southward refolding of early ductile fabrics.

The Central Dabieshan is a 100-km scale migmatitic dome. Newly discovered eclogite xenoliths in a Cretaceous granitoid dated at 102 Ma by the U–Pb method on titanite demonstrate that migmatization post-dates HP–UHP metamorphism. Ductile faults formed in the subsolidus state coeval to migmatization allow us to characterize the structural pattern of doming. Along the dome margins, migmatite is gneissified under post-solidus conditions and mylonitic–ultramylonitic fabrics commonly develop. The north and west boundaries of the Central Dabieshan metamorphics, i.e. the Xiaotian–Mozitan and Macheng faults, are ductile normal faults formed before Late Jurassic–Early Cretaceous. A Cretaceous reworking is recorded by synkinematic plutons.

North of the Xiaotian–Mozitan fault, the North Dabieshan Domain consists of metasediments and orthogneiss (Foziling and Luzenguang groups) metamorphosed under greenschist to amphibolite facies which never experienced UHP metamorphism. A rare N–S-trending lineation with top-to-the-south shearing is dated at 260 Ma by the ⁴⁰Ar/³⁹Ar method on muscovite. This early structure related to compressional tectonics is reworked by top-to-the-north extensional shear bands.

The main deformation of the Dabieshan consists of a NW–SE-stretching lineation which wraps around the migmatitic dome but exhibits a consistently top-to-the-NW sense of shear. The Central Dabieshan is interpreted as an extensional migmatitic dome bounded by an arched, top-to-the-NW, detachment fault. This structure may account for a part of the UHP rock exhumation. However, the abundance of amphibolite restites in the Central Dabieshan migmatites and the scarcity of eclogites (found only in a few places) argue for an early stage of exhumation and retrogression of UHP rocks before migmatization. This event is coeval to the N–S extensional structures described in the North Dabieshan Domain. Recent radiometric dates suggest that early exhumation and subsequent migmatization occurred in Triassic–Liassic times. The main foliation is deformed by north-verging recumbent folds coeval to the south-verging folds of the South Dabieshan Domain. An intense Cretaceous magmatism accounts for thermal resetting of most of the ⁴⁰Ar/³⁹Ar dates.

A lithosphere-scale exhumation model, involving continental subduction, synconvergence extension with inversion of southward thrusts into NW-ward normal faults and crustal melting is presented.     

从118.75 GHz附近六通道亮温反演大气温度廓线的数值模拟研究

为了能在静止气象卫星上实现微波被动遥感探测大气温度廓线,并保持一定的地面空间分辨率(如视场小于60 km),就需要使用高频微波及大天线.欧洲和美国下一代静止气象卫星上都已考虑采用118.75 GHz附近通道.为了充分了解118.75 GHz附近通道遥感反演温度廓线的能力,为仪器研制及今后资料的解释反演提供必要的基础数据,作者开展了采用118.75 GHz附近六个通道遥感反演大气温度廓线的数值模拟研究.统计反演的数值试验表明,118.75 GHz附近六通道对温度垂直分布有一定的遥感反演能力;温度反演较好的层次对应于权重函数峰值所在的位置.     

广东省空气质量预报系统

文章介绍了广东省气象系统开展空气质量预报的概况，包括使用的预报工具，其预报能力与业务运行的预报质量分析，以及进一步提高预报水平的一些设想。     

一次区域性大暴雨环境特征分析

通过对冀东南、鲁西北一次区域性大暴雨的分析表明：除有利的大尺度环流背景以外，超低空急流是大暴雨不稳定能量和水汽的主要输送者，高能区不稳定能量释放，产生大暴雨所需的强烈上升运动。暴雨落区与超低空急流前部最大风速切变区的位置密切相关。     

政务公开是实现事业发展的重要途径

政务公开工作推行之后,几次到洪洞县气象局调研、学习,目睹他们不断变化的优美环境,令人叹慕攀升的创收数字,现代化服务手段内容的拓展和扩充,井然有序的业务工作秩序和实实在在的工作质量……激发人去思考。他们的做法是否有一些规律性的东西对工作有所启示呢?责任心使然,不能不引起对洪洞气象工作的关注。洪洞县气象局占地约0.7hm2,生活、工作用房约600m2,在“九五”期间首批完成台站改造,属国家一般气候站。现有6名在职职工,在政府科级局中是最小的单位,且女同志占到66%,正、副局长均为女同志。在部门气象事业向社会气象事业转变中他们除…     

沂沭断裂带中部地区地震波速及地壳厚度的测定

选取1990～2001年发生在沂沭断裂带中部地区的23次ML2．3～4．0级地震为基础资料，对沂沭断裂带中段及附近地区地震波速进行了研究。结果表明，研究区-↑Vp=5．83km／s，-↑Vs=3．54km／s。同时，根据反射波走时方程，得出该地区反射波速度Vp11=6．21km／s，Vs11=3．65km／s和平均地壳厚度为37km。