侧视雷达影像距离-共面模型严密定位

本文对现有侧视雷达遥感影像的几何构像模型在摄影测量应用中的不足进行了理论分析,以外方位元素作为定向参数,依次建立了像点坐标显函数形式的距离-共面(R-Cp)方程、地心直角坐标系中星载侧视雷达影像的距离-共面方程、以及星载侧视雷达遥感影像的严密定位模型,并进行了稀少控制点条件的星载TerraSAR-X影像定位试验。理论和试验表明,本文所建立的R-Cp严密定位模型,使得雷达影像像点量测坐标作为摄影测量观测值的属性得到体现,容易吸收和利用光学遥感影像基于共线方程模型发展起来的成熟的数字摄影测量数据处理方法,有利于提高雷达遥感影像摄影测量数据处理的严密性、稳定性、可靠性及数据处理效率。     

利用MATLAB实现图像处理与分析

本文通过对图像的均衡操作、二值图像的处理、小波去噪等实例，介绍了MATLAB进行图像处理和分析的实用方法与技巧，它对各种软钉包、进行图像处理和分析等，提供了高效便捷的方法。     

复杂地貌形态多比例尺表达的二维小波分析研究

针对复杂地貌形态的多比例尺表达中的等高线容易相交、地性特征描述困难和表达过程缺乏自适应等难题，提出了基于小波理论的复杂地貌形态的多比例尺表达模型，为上述问题的解决提供了新的思路和有效途径。     

Long-term polar motion prediction using normal time–frequency transform

This paper presents normal time–frequency transform (NTFT) application in harmonic/quasi-harmonic signal prediction. Particularly, we use the normal wavelet transform (a special NTFT) to make long-term polar motion prediction. Instantaneous frequency, phase and amplitude of Chandler wobble, prograde and retrograde annual wobbles of Earth’s polar motion are analyzed via the NTFT. Results show that the three main wobbles can be treated as quasi-harmonic processes. Current instantaneous harmonic information of the three wobbles can be acquired by the NTFT that has a kernel function constructed with a normal half-window function. Based on this information, we make the polar motion predictions with lead times of 1 year and 5 years. Results show that our prediction skills are very good with long lead time. An abnormality in the predictions occurs during the second half of 2005 and first half of 2006. Finally, we provide the future (starting from 2013) polar motion predictions with 1- and 5-year leads. These predictions will be used to verify the effectiveness of the method proposed in this paper.     

3维数字地球快速缓冲区分析算法

提出一种应用在3维数字地球中的通过图形处理器(GPU)快速实现矢量数据缓冲区分析的算法。使用一张4通道的纹理图作为容器将地理实体的矢量数据传入GPU,利用GPU的高效并行特性,将目标缓冲区纹理中的每个像素所对应的矢量坐标与原实体进行距离量算,在一次渲染中得到缓冲区纹理,最后提取出缓冲区纹理的边界。选择中国的流域和湖泊矢量数据,将本文算法与两种传统的CPU算法进行了缓冲区分析计算、测试和对比。结果显示,本文算法相对于传统矢量算法效率提高了9—16倍,相对于传统栅格算法效率提高11—20倍。实验证明,该算法计算简单,效果明显,特别是随着数据量增大,缓冲区计算速度显著优于传统算法,并能有效解决传统矢量法缓冲区分析中的数据自相交问题。     

Mapping Wetland Areas Using Landsat-Derived NDVI and LSWI: A Case Study of West Songnen Plain,Northeast China

Increasing interest in wetlands for environmental management requires an understanding of the location, spatial extent, and configuration of the resource. The National Wetlands Inventory is the most commonly used data source for this information. However, its accuracy is limited in some contexts, such as agricultural and forested wetlands. An large number of studies have mapped wetlands worldwide from the perspective of land use and land cover change. However, information on the actual wetland planting areas annually is limited, which greatly impacts ongoing research. In this case study of the West Songnen Plain, we developed a simple algorithm for the quick mapping of wetlands by utilizing their unique physical features, such as annual display of phenological land-cover change of exposed soils, shallow flooding water, and plants from multi-temporal Landsat images. Temporal variations of the Normalized Difference Vegetation Index (NDVI) and Land Surface Water Index (LSWI) derived from Landsat images in 2010 for wetlands at different growth stages were analyzed. Results show that during the ante-tillering phase, the NDVI value (above zero) is lower than the LSWI value of paddies because of flooding of shallow water; during the reproductive and ripening phases, the NDVI value is higher than the LSWI value (above zero); and during the post-harvest wetland planting phase, the NDVI value is still higher than the LSWI value, but the LSWI value is negative. Wetland areas can be detected using one or two images in the optimum time window. The algorithm based on the difference of NDVI and LSWI values derived from Landsat images was used to extract the actual wetland planting area. Validated alongside statistical data, the algorithm showed high accuracy. Therefore, this algorithm highlights the unique features of wetlands and can help in mapping the actual wetland area annually on a regional scale. Results further indicate that the new method has a classification accuracy of 92 %. In comparison, two traditional methods based on Landsat-7/ETM registered accuracy rates of only 83 % and 87 % respectively.     

汶川地震灾后农田和森林植被恢复遥感监测

2008年汶川8.0级特大地震对当地的生态系统造成了极大的破坏,为了评估5年来灾区农田和森林植被的恢复情况,利用逐年机载高分辨率遥感影像,结合星载遥感数据和地面调查数据,开展了灾区农林植被恢复状况监测。在农田恢复监测方面,结合2008年地震发生后以及2013年5月中旬的机载高分辨率遥感数据,采用目视解译的方式对汶川地震中受损农田的恢复状况进行监测与评估,同时利用GVG(GPS、Video和GIS)农情采样系统的作物种植成数调查结果,分析了灾后作物种植结构的变化。结果表明,灾区1592 ha受损农田,5年后仅有约17.5%得到了恢复和耕种使用。就耕地利用强度而言,重灾区耕地利用率较高,作物种植结构没有发生重大变化。在森林恢复状况监测方面,对典型区(岷江干旱河谷区和盆周山地区的3个重点区域)采用目视解译方式识别出森林变化,并结合大区域尺度规一化植被指数(NDVI)时间序列变化分析,对整个灾区的森林损毁和恢复情况做出评价。监测结果显示,汶川县、什邡市和绵竹市的森林植被恢复情况总体较好,但是一些坡度较大的损毁区、次生灾害频发区的森林尚未恢复,大区域尺度的统计结果显示,地震重灾区的46381 ha重度损毁森林植被和177025 ha中度损毁森林植被区域,完全恢复的区域占13.52%和25.84%,部分恢复的区域都占到50%。在自然恢复较为困难的区域,如汶川县中部和东北部、都江堰市北部、彭州市北部、什邡市北部、绵竹市北部、安县北部及北川县南部等,需要加强人工干预。遥感监测方法既适用于震后的农田和森林恢复状况动态监测,也适用于其他自然灾害发生时对灾区农田和森林植被破坏状况进行应急监测,具有实际应用价值和良好的发展前景。     

Shadow detection and compensation for color aerial images

A method for shadow detection and compensation for color aerial images is presented. It is considered that the intensity value of each image pixel is the product of illumination function and ground object reflection, and the shadowed regions on the image are mainly caused by the short of illumination, so the information compensation for the shadowed regions should concentrate on the illumination adjustment of concerned area on the basis of the analysis of whole image. The shadow detection and compensation procedure proposed by this paper consists of four steps.     

Automatic placement of GIS vector map annotation in area feature by long-diagonal

This paper discusses the placement of Chinese annotation from point of view of graphics. Area Feature is classified as simple polygon, complex polygon and special polygon. For simple ones, annotations are placed along the longest edge. For complex ones, firstly the polygon are simplified according to close points, then the longest diagonal is gotten by comparing length, lastly, annotations are placed along long-diagonal. For special ones, the polygon are partitioned into several parts by a certain rule for getting their sub-diagonals, then their annotation are placed by means of the second.     

天宫一号超光谱仪红外谱段的实验室定标

天宫一号超光谱仪红外谱段光谱范围是8.0—10.5 μm,采用红外线列焦平面推扫方式成像.通过实验室定标实验,获得了每个探测元对应的辐射响应系数和响应线性度,并得到每一探测元的动态范围与噪声等效温差,验证了图像输出校正效果,同时,根据定标实验误差来源分析计算了最终的辐射定标误差.