Coronal changes associated with a disappearing filament

This paper describes Skylab/ATM observations of the events associated with a disappearing filament near the center of the solar disk on January 18, 1974. As the filament disappeared, the nearby coronal plasma was heated to a temperature in excess of 6 × 10⁶K. A change in the pattern of coronal emission occurred during the 11/3 hr period that the soft X-ray flux was increasing. This change seemed to consist of the formation and apparent expansion of a loop-like coronal structure which remained visible until its passage around the west limb several days later. The time history of the X-ray and microwave radio flux displayed the well-known gradual-rise-and-fall (GRF) signature, suggesting that this January 18 event may have properties characteristic of a wide class of X-ray and radio events.In pursuit of this idea, we examined other spatially-resolved Skylab/ATM observations of long-duration X-ray events to see what characteristics they may have in common. Nineteen similar long-lived SOLRAD X-ray events having either the GRF or post-burst radio classification occurred during the nine-month Skylab mission. Sixteen of these occurred during HAO/ATM coronagraph observations, and 7 of these 16 events occurred during observations with both the NRL/ATM slitless spectrograph and the MSFC-A/ATM X-ray telescope. The tabulation of these events suggests that all long-lived SOLRAD X-ray bursts involve transients in the outer corona and that at least two-thirds of the bursts involve either the eruption or major activation of a prominence. Also, these observations indicate that long-lived SOLARD events are characterized by the appearance of new loops of emission in the lower corona during the declining phase of the X-ray emission. However, sometimes these loops disappear after the X-ray event (like the post-flare loops associated with a sporadic coronal condensation), and sometimes the loops remain indefinitely (like the emission from a permanent coronal condensation).Visiting Scientist, Kitt Peak National Observatory, Tucson, Ariz. 85726, U.S.A. operated by the Association of Universities for Research in Astronomy, Inc., under contract with the National Science Foundation.Presently located at NASA/MSFC, Space Sciences Laboratory, Marshall Space Flight Center, Ala. 35812, U. S.A.     

The hydrogeochemistry of methane: Evidence from English groundwaters

The presence of methane (CH₄) in groundwater is usually only noticed when it rises to high concentrations; to date rather little is known about its production or natural ‘baseline’ conditions. Evidence from a range of non-polluted groundwater environments in England, including water supply aquifers, aquicludes and thermal waters, reveals that CH₄ is almost always detectable, even in aerobic conditions. Measurements of potable waters from Cretaceous, Jurassic and Triassic carbonate and sandstone aquifers reveal CH₄ concentrations of up to 500 μg/l, but a mean value of < 10 μg/l. However, aquiclude and thermal waters from the Carboniferous and Triassic typically contain in excess of 1500 μg/l. Such high concentrations have so far only been found at redox (Eh) potentials below 0 mV, but in general CH₄ concentration and Eh value are poorly correlated. This suggests a lack of thermodynamic equilibrium, which is confirmed by comparing pe values calculated from the redox couple C(4)/C(− 4) with those derived from Eh. Genesis of CH₄ appears to occur on two timescales: a rapid if low rate of production from labile carbon in anaerobic microsites in the soil, and a much longer, millennium scale of production from more refractory carbon. Methane is rarely measured in groundwater; there is no single ionic determinand which acts universally as a proxy, but a combination of high HCO₃ and low SO₄ concentrations, or the reverse, is an indication that high amounts of CH₄ may be present.     

Assessment of the mycoflora of commercial poultry feeds sold in the humid tropical environment of Imo State, Nigeria

This study was carried out to identify the common moulds growing in selected commercial poultry feed sold in Owerri, Imo State, Nigeria. Forty-eight bulk samples derived froml92 bags of feeds were collected from broiler starter (BS), broiler finishers (BF), grower mash (GM) and layer mash (LM) across 4 different brands of ommercial poultry feeds, which included Livestock (LF), Top (TF) Guinea (GF) and Vital (VF) feeds. The feed samples were collected during the rainy season months of June, July and August. The common moulds isolated from these feeds were Aspergillus sp., Peicillium sp.,Mucor sp., Yeast sp., Rhizopus sp., Epicoecum sp., Gymnoaseus sp., Cladosporium sp., Mortierella sp. as well as Bacteria. Generally, more organisms were isolated in June than the other months with Mortierella sp. being the only one not isolated in that month. Vital feed with 8 different isolates had the highest diversity of fungal species while the others had between 4 and 5 species. Prevalence rates across the feed types, generally ranged from 18.76% in layer mash to 30.03% in broiler finisher. The four Aspergillus sp. isolated came from GM and BF. This study highlights the need for constant monitoring of moulds in commercial feedstuff produced in the humid tropical environments such as Imo state, Nigeria. There is also the need to routinely include fungal growth nhibitors in commercial feeds since moulds are capable of reducing the nutritional values of feedstuff as well as elaborating pathogenic toxins.     

Total organic carbon in soils and its relation with manganese concentrations in soils and vegetation close to an abandoned manganese mine

This study aimed at quantifying the total organic carbon (TOC) present in soils within the proximity of the Kgwakgwe Mn oxide ore abandoned mine, Botswana, and establish its relationship with Mn concentrations in soils and vegetation based on multivariate and Geographical Information Systems (GIS) analytical techniques. Four hundred soil samples and 200 vegetation set samples were obtained from a 4 km² area close to the abandoned mine. The TOC in soil samples were determined using a carbon/hydrogen/moisture determinator, and Mn concentrations in soils and vegetation by atomic absorption spectrophotometry. Results were processed using the statistical package for social science (SPSS), GIS, and Remote Sensing (RS) techniques with the Integrated Land and Water Information System (ILWIS), Geosoft Oasis Montaj and ArcGIS software packages. The values for TOC in the soil samples from the study area ranged from 0 wt % to 7.91 wt %, with a mean of 1.90 wt %, and at the control area, from 4.07 wt % to 4.86 wt %. The range of concentrations of Mn in soils was from 36 mg/g to 24908 mg/g and for Mn concentrations in the vegetation samples from 26 mg/g to 3611 mg/g with a mean of 598 mg/g. Results of correlation coefficients depicted very weak negative association except Mn in soils/Mn in leaves which was weak but positive. The statistical data yielded four clusters as follows: cluster one consisted mainly of Mn in leaves, cluster two was constituted of Mn in soils, and cluster four had TOC. Cluster three was dominated by the three parameters but with negative t statistic. The spatial presentation of data presented revealed little or no vegetation in the south eastern area and those close to the mine workings, and some significant vegetation in the north western part of the study area. The low TOC in the soils is associated to low vegetation cover which is considered to have been influenced by the soil clay fraction mineralogy and high concentrations of Mn.     

Insight into the structure of the Upper Rhine Graben and its basement from a new compilation of Bouguer Gravity

A compilation of gravity data from the Upper Rhine Graben (URG) is presented that includes all the main data sources from its German and French parts. This data is used to show that the URG consists of, at least, two arc-shaped and asymmetric rift units that tectonically are the basic building blocks of the graben. In this sense the URG does not differ from other continental rifts, such as the African rifts. This division should replace the now classical geomorphologic division of the URG into three segments, based on their different trends. Moreover, the gravity suggests that the faults in the central and southern segments are continuous and have the same trend, appearing to respond as a single kinematic unit. Changes in the gravity field in the graben are shown to reflect not only the structure of the graben, but also the highly variable composition of the basement. In this respect, the URG is quite different from some other Tertiary continental rifts, where possible changes in the composition of the basement are mostly masked in the gravity field by the effect of the overlying low-density sediments. This characteristic is used to study the extent of some of the main basement units that underlie the graben.     

An electrochemical study of pyrite oxidation in the presence of carbon coatings in cyanide medium

The anodic and cathodic behaviour of pyrite with clay and different carbon coatings of activated carbon, graphite and carbonaceous matter in cyanide medium was investigated using the potentiodynamic method. The presence of clay coating did not change the polarisation curve appearance for either the anodic oxidation of pyrite or the cathodic reduction of oxygen or the potential of the current plateau, but only decreased the plateau current especially at a higher coating thickness. The presence of the carbon coatings marginally shifted the rest potential for pyrite to a more anodic position and slightly changed the polarisation curve appearance for pyrite oxidation. The current density for pyrite oxidation largely increased in the presence of the carbon coatings, the potential at the plateau shifted to more cathodic positions, and the plateau width became smaller. These effects became more noticeable at a higher coating thickness. The activated carbon, graphite and carbonaceous matter coatings performed similarly in affecting pyrite oxidation at a similar thickness. The carbon coatings significantly increased the limiting current densities for oxygen reduction on pyrite, and the limiting current plateau became steeper at a higher coating thickness. The carbon coatings increased the limiting current density for oxygen reduction to a similar extent at a low coating thickness, but increased to varied extents at a higher coating thickness. The carbon coatings also greatly increased the cathodic current density for gold reduction on pyrite. The enhancement of pyrite oxidation and oxygen or gold reduction on pyrite by the carbon coatings was likely attributed to the electrochemical interaction between pyrite and the carbon materials with electron-rich surfaces and high conductivity. The presence of the carbon coatings significantly increased the oxidation of pyrite in aerated cyanide solutions and the preg-robbing of pyrite especially at a higher coating thickness.     

Effects of enhanced zinc and copper in drinking water on spatial memory and fear conditioning

Ingestion of enhanced zinc can cause memory impairments and copper deficiencies. This study examined the effect of zinc supplementation, with and without copper, on two types of memory. Rats raised pre- and post-natally on 10 mg/kg ZnCO₃ or ZnSO₄ in the drinking water were tested in a fear-conditioning experiment at 11 months of age. Both zinc groups showed a maladaptive retention of fearful memories compared to controls raised on tap water. Rats raised on 10 mg/kg ZnCO₃, 10 mg/kg ZnCO₃ + 0.25 mg/kg CuCl₂, or tap water, were tested for spatial memory ability at 3 months of age. Significant improvements in performance were found in the ZnCO₃ + CuCl₂ group compared to the ZnCO₃ group, suggesting that some of the cognitive deficits associated with zinc supplementation may be remediated by addition of copper.