皖南晚中生代花岗闪长岩地球化学:成岩成矿制约

皖南地区是铜、钼、金多金属成矿区,成矿与晚中生代花岗闪长岩类关系密切。近十年来,皖南花岗闪长岩的成因仍然存在分歧。本次报道了皖南花岗闪长岩全岩主、微量元素和锆石原位元素数据。皖南花岗闪长岩(Si O2=64.3%~70.8%)为高钾钙碱性、过铝质岩石,具有相似的埃达克岩特征:高Si O2、Sr/Y(17.1)和(La/Yb)N(14.9)比值,低Yb(1.72×10-6)和Y(18.4×10-6)含量。它们也具有较低Al2O3和Cr(3.40×10-6~10.0×10-6)含量、低Mg#(0.34~0.42)和Nb/Ta(9.6~13.3)值,高K2O和Ba(404×10-6)含量,高K2O/Na2O(0.89~1.55)、Th/La(0.27~0.51)和Th/U(2.79~7.49)比值。锆石原位地球化学特征显示其岩浆源区为低温(锆石Ti-in-zircon温度均值674℃)和高氧逸度(lgfO2集中在-21.4~-9.18,均值-16.4;锆石Ce4+/Ce3+平均值276)的陆壳。这些特征说明皖南花岗闪长岩可能起源于较年轻的加厚下地壳的部分熔融,并经历了斜长石、钾长石和铁镁矿物等结晶分异作用。它们可能形成于与古太平洋板块俯冲密切相关的大陆活动边缘弧至弧后拉张构造转换背景。本区大规模Cu、Mo、Au成矿作用与岩浆的高氧逸度密切相关,而锆石Ce4+/Ce3+可作为矿床勘探一个有效的指标。     

天山南麓库车晚新生代褶皱-冲断带

库车褶皱冲断带位于天山南麓,由近东西走向的多条构造带组成。三叠系暗色泥岩、侏罗系煤层、古近系库姆格列木组膏盐层和新近系吉迪克组膏盐层构成库车褶皱冲断带的区域性主滑脱面。褶皱冲断带底面由北向南逐渐抬高。褶皱冲断带主体发育盖层滑脱-冲断构造(薄皮构造),基底卷入型冲断构造(厚皮构造)见于北缘的根带。新生界膏盐层之上构造变形以滑脱褶皱为特色,之下以冲断构造为特色。库车褶皱冲断带是印度-亚洲碰撞远程效应下,(南)天山晚新生代造山过程的产物。褶皱冲断带构造变形的动力来源主要是造山楔向塔里木盆地推进所形成的挤压构造应力。褶皱冲断带构造变形的起始时间为约23Ma,构造变形具有阶段式加速的特点,已经识别出约23Ma、约10Ma、5~2Ma和1~0Ma共4个变形加速期。褶皱冲断带的演化过程为前展式,褶皱冲断带前锋向南推进的同时,后缘持续变形。     

The Exhumation History of North Qaidam Thrust Belt Constrained by Apatite Fission Track Thermochronology: Implication for the Evolution of the Tibetan Plateau

Determining the spatio-temporal distribution of the deformation tied to the India-Eurasian convergence and the impact of pre-existing weaknesses on the Cenozoic crustal deformation is significant for understanding how the convergence between India and Eurasia contributed to the development of the Tibetan Plateau. The exhumation history of the northeastern Tibetan Plateau was addressed in this research using a new apatite fission track (AFT) study in the North Qaidam thrust belt (NQTB). Three granite samples collected from the Qaidam Shan pluton in the north tied to the Qaidam Shan thrust, with AFT ages clustering in the Eocene to Miocene. The other thirteen samples obtained from the Luliang Shan and Yuka plutons in the south related to the Luliang Shan thrust and they have showed predominantly the Cretaceous AFT ages. Related thermal history modeling based on grain ages and track lengths indicates rapid cooling events during the Eocene-early Oligocene and since late Miocene within the Qaidam Shan, in contrast to those in the Cretaceous and since the Oligocene-Miocene in the Luliang Shan and Yuka region. The results, combined with published the Cretaceous thermochronological ages in the Qaidam Shan region, suggest that the NQTB had undergo rapid exhumation during the accretions along the southern Asian Andean-type margin prior to the India-Eurasian collision. The Cenozoic deformation initially took place in the North Qaidam thrust belt by the Eocene, which is consistent with the recent claim that the deformation of the northeastern Tibetan Plateau initiated in the Eocene as a response to continental collision between India and Eurasia. The immediate deformation responding to the collision is tentatively attributed to the pre-existing weaknesses of the lithosphere, and therefore the deformation of the northeastern Tibetan Plateau should be regarded as a boundary-condition-dependent process.     

利用两种指纹因子判别小流域泥沙来源

为精确识别黄土高原丘陵沟壑区典型小流域泥沙来源,分析了流域内“源-汇”地区土壤的理化性质及生物标志物（正构烷烃）作为潜在指纹识别因子,并建立了复合指纹模型。结果显示:单独的土壤理化指纹及正构烷烃均不能有效识别泥沙来源;土壤理化指纹和正构烷烃分别在林地、农地及沟道的辨别上显示出其局限性。多元化的复合指纹（碳优势指数CPI、Ca、TP、C₂₀、C₂₉、Fe）则能辨别90.5%的泥沙来源。模型结果显示沟道是该流域泥沙的主要来源,占60.8%,其次为农地占20.7%,林地占11.3%,草地占7.2%。研究表明,结合生物标志物的复合指纹法能更精确地反映泥沙来源,适用于各泥沙源头的地质条件差异较小的流域,对黄土高原小流域水土流失治理具有指导意义。     

A Survey of the Spatio-Temporal Data Model

Traditional GIS(Geographic Information System)mostly can only describe the transient state data and does not have the ability to deal with the temporal dynamic data. When the data changes, new data will take the place of the old data, namely the transient state change into another, and the old data will disappear. Therefore, it is unable to make an analysis of the updating changes of the data and predict the development trend of the future. In this case, TGIS (Temporal Geographic Information System) emerges and expands the time dimension on the basis of traditional GIS. Spatio-temporal data model is the key to TGIS. Spatio-temporal data modeling is not only related to dynamic expression of spatio-temporal objects, but also gives an important support for spatio-temporal analysis and reasoning. This paper summarized the theories and applications status at home and abroad of spatio-temporal data model in detail, illustrated family tree of spatio-temporal data model for the nearly fifty years, discussed improvement and application status of Base State with Amendments Model, Event-based Spatio-temporal Data Model, Object-oriented Data Model and other spatio-temporal data models, and raised the existing problems of spatio-temporal data model. The current existing problems mainly includes: ①There are a lot of spatio-temporal data models put forward, but some of them only focus on semantic design and neglect the verified; ②Most of existing spatio-temporal data model are for vector data, only the Event-based Spatio-temporal Data Model is raster data structure; ③At present, the expression the time-space information of geographic entity is relative separated with spatio-temporal data model; ④Spatio-temporal data model is mainly used in cadastral management, land use and forestry data updating, less application in other fields. In the end, the future development direction was put forward of spatio-temporal data model. In the time of big data and “Internet plus”, it is necessary to explore the big data spatio-temporal data model that supports multiple data formats.     

北京后沙峪凹陷的第四纪地层划分与构造演化

通过对北京平原北部昌平、顺义、朝阳等区域的多个深孔资料、尤其后沙峪地区G3钻孔资料的深入分析,并开展磁性地层学及孢粉测试成果研究,建立了钻孔的磁性地层序列,结合南口—孙河断裂、顺义断裂以及黄庄—高丽营断裂的活动性研究成果,确定了后沙峪凹陷的第四纪地层格架,分析了凹陷的构造演化过程。结果表明,后沙峪凹陷上G3孔下更新统底界为511.7 m,中更新统底界为175.5 m,上更新统底界为31.6 m。在燕山期晚期,黄庄—高丽营断裂形成,控制了北京凹陷的西部边界,在北东向顺义断裂和北西向南口—孙河断裂共同作用下形成后沙峪凹陷。进入第四纪后,G3钻孔地层在早、中、晚更新世的沉积速率分别为0.198 mm/a、0.255 mm/a和0.243 mm/a;各条断裂活动速率的差异性客观反映出各块体之间的升降特点。由于后沙峪凹陷处于黄庄—高丽营断裂的上盘,同时也是顺义断裂的下盘,因此,断裂间的相互运动在第四纪沉积作用下形成了后沙峪凹陷。     

贵州沿河萤石矿稀土元素地球化学特征及成因探讨

为了研究沿河县萤石矿成因,主要针对研究区内具代表性的水田坝和丰水岭两个矿床地质特征进行研究,并运用等离子质谱(ICP-MS)对稀土元素进行了系统分析。研究结果表明,围岩的稀土总量、轻稀土和重稀土的含量远高于萤石矿石,但是萤石的稀土配分型式与围岩相似。根据Moller等(1976)的Tb/Ca_Tb/La关系图,结合矿体特征和区地质背景研究,认为该区萤石矿为热水(热卤水)再造沉积岩(或矿床)。     

济阳坳陷古近系泥页岩成因相划分

系统岩心观察和高密度薄片鉴定等分析测试资料研究结果显示,济阳坳陷沙三下-沙四上泥页岩成分组成及构造类型主要受沉积作用控制,岩石结构特征主要受成岩作用控制。根据泥页岩中方解石成因及重结晶程度,结合岩石成分及构造特征,将济阳坳陷沙三下-沙四上泥页岩划分为沉积主控型、沉积-成岩双控型及成岩主控型三大成因相。沉积主控型分布最为广泛,岩相类型多样,构造特征反映成因环境;沉积-成岩双控型主要见于纹层状岩相,由泥质纹层与显晶粒状方解石纹层互层构成;成岩主控型以柱状、柱纤状方解石垂直层面呈脉状、透镜状产出为特征。成岩主控型和沉积-成岩双控型泥页岩与页岩油气关系密切,是重要的有利成因相类型。     

点苍山-哀牢山杂岩带中北段嘎洒地区变沉积岩的成因矿物学与变质演化特征

点苍山-哀牢山变质杂岩带中北段嘎洒地区出露了多种典型的变沉积岩,其中夕线石榴黑云二长片麻岩和二云母片岩保存多期/多阶段矿物相转变特征,本文通过岩相学和矿物化学的综合分析,并结合传统矿物对温压计的估算结果,限定上述典型变沉积岩峰期角闪-麻粒岩相(M1)阶段、近等温减压-高温剪切变形阶段(M2)和晚期退变质(M3)阶段的矿物组合及变质温压条件。峰期角闪-麻粒岩相(M1)阶段的矿物组合为:石榴石(Grt)+板柱状夕线石(Sil1)+黑云母(Bt1)+钾长石(Kfs)+斜长石(Pl)+石英(Qtz)+钛铁矿(Ilm),变质温度压力条件为t=690~750℃,p=690~810 MPa;近等温减压-高温剪切变形阶段(M2)阶段,稳定矿物组合为:Grt+Sil2+Bt2+Kfs+Pl+Qtz+Ilm,黑云母在强烈走滑剪切作用下发生脱水熔融反应:2 Bt→Sil+6(Mg,Fe)O+K_2O+5 Qtz+2 H_2O,石榴石、黑云母和夕线石等受到剪切变形影响而发生强烈定向,形成的温度压力条件为t=650~720℃,p=450~630 MPa;晚期退变质阶段(M_3)的稳定矿物组合为:Qtz+Bt+Ms+Pl,退变的温度压力条件为t=580~640℃,p=400~500MPa。其变质演化p-T轨迹样式具有近等温减压的顺时针型式,表明点苍山-哀牢山变质杂岩带曾经历了一次明显的俯冲-碰撞造山事件,峰期变质可达到角闪-麻粒岩相;在碰撞后的构造折返过程中,上述变质岩石发生强烈的高温剪切变形作用,并伴随着黑云母等含水矿物的脱水熔融。