絮凝法强化大生活用海水一级处理研究

研究了无机絮凝剂石灰、硫酸铝、聚合氯化铝、聚合硫酸铁和氯化铁单独使用及其与有机高分子絮凝剂聚丙烯酰胺（PAM）配合使用时强化大生活用海水一级处理的效果，结果表明，无机絮凝剂与有机絮凝剂配合使用时有很好的强化效果，COD去除率最高达61%，且对SS和BOD也有一定的去除效果。     

Co–rich Mn crusts from the Magellan Seamount cluster: the long journey through time

The Magellan seamounts began forming as large submarine shield volcanoes south of the equator during the Cretaceous. These volcanoes formed as a cluster on the small Pacific plate in a period when tectonic stress was absent. Thermal subsidence of the seafloor led to sinking of these volcanoes and the formation of guyots as the seamounts crossed the equatorial South Pacific (10–0°S) sequentially and ocean surface temperatures became too high for calcareous organisms to survive. Guyot formation was completed between about 59 and 45 Ma and the guyots became phosphatized at about 39–34 and 27–21 Ma. Ferromanganese crusts began formation as proto-crusts on the seamounts and guyots of the Magellan Seamount cluster towards the end of the Cretaceous up to 55 Ma after the formation of the seamounts themselves. The chemical composition of these crusts evolved over time in a series of steps in response to changes in global climate and ocean circulation. The great thickness of these crusts (up to 15–20 cm) reflects their very long period of growth. The high Co contents of the outer parts of the crusts are a consequence of the increasing deep circulation of the ocean and the resulting deepening of the oxygen minimum zone with time. Growth of the Co-rich Mn crusts in the Magellan Seamount cluster can be considered to be the culmination of a long journey through time.     

Estimating the geostrophic velocity obtained by HF radar observations in the upstream area of the Kuroshio

A method to extract geostrophic current in the daily mean HF radar data in the Kuroshio upstream region is established by comparison with geostrophic velocity determined from the along-track altimetry data. The estimated Ekman current in the HF velocity is 1.2% (1.5%) and 48° (38°)-clockwise rotated with respect to the daily mean wind in (outside) the Kuroshio. Furthermore, additional temporal smoothing is found necessary to remove residual ageostrophic currents such as the inertial oscillation. After removal of the ageostrophic components, the HF geostrophic velocity agrees well with that from the altimetry data with rms difference 0.14 (0.12) m/s in (outside) the Kuroshio.     

The origin and biogeochemistry of organic matter in surface sediments of Lake Shihwa and Lake Hwaong

To understand the origin and biogeochemistry of the organic matter in surface sediments of Lake Shihwa and Lake Hwaong, organic nitrogen, inorganic nitrogen, labile organic carbon, and residual organic carbon contents as well as stable isotope ratios for carbon and nitrogen were determined by KOBr-KOH treatment. Ratios of organic carbon to organic nitrogen (C_org/N_org) (mean = 24) were much higher than ratios of organic carbon to total nitrogen (C_org/N_tot) (mean=12), indicating the presence of significant amounts of inorganic nitrogen in the surface sediments of both lakes. Stable isotope ratios for organic nitrogen were, on average, 5.2‰ heavier than ratios of inorganic nitrogen in Lake Shihwa, but those same ratios were comparable in Lake Hwaong. This might be due to differences in the origin or the degree of degradation of sedimentary organic matter between the two lakes. In addition, stable isotope ratios for labile organic carbon were, on average, 1.4‰ heavier than those for residual organic carbon, reflecting the preferential oxidation of¹³C-enriched organic matter. The present study demonstrates that KOBr-KOH treatment of sedimentary organic matter can provide valuable information for understanding the origin and degradation state of organic matter in marine and brackish sediments. This also suggests that the ratio of C_org/N_org and stable isotope ratios for organic nitrogen can be used as indexes of the degree of degradation of organic matter.     

GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

Chronology and cooling history of the Tianmenshan pluton in South Jiangxi Province and their geological significance

Geochronological studies on the crust-derived Tianmenshan pluton were undertaken by SHRIMP zircon U-Pb dating and Ar-Ar dating of biotite, muscovite and K-feldspar, giving a petrogenetic age of 167 Ma. Owing to the closure systems in different minerals, the cooling history of the pluton can be determined with an age-temperature diagram. The late hydrothermal event has been recognized, which is related probably with mineralization. In terms of the comparative geochronological and petrologic records, it is concluded that there are some constrains on tectonic evolution and that the formation of the Tianmenshan pluton proceeded in a transition period from Indosinian post-orogeny extension to strong compressive tectonics. And the timing of the hydrothermal event matches the compressive climax of the Yanshanian orogeny. The temporal gap between granite emplacement and wolframite mineralization could last 10-20 Ma owing to the low cooling rate of the pluton.     

Study on rain-runoff process in the peripheral mountainous area of the Sichuan Basin

Studies on rain-runoff process in the peripheral mountainous area of the Sichuan Basin, which is regarded as a key ecological shelter, will contribute to flood control and environmental protection for the Upper Yangtze River Basin. In two typical catchments--the Fujiang River Catchment and the Wujiang River Catchment, rainfall simulations have been conducted to study the rain-runoff processes of yellow soil and limestone soil in three types of land use--forestland, farmland and grassland. Results showed that （1） within the same rainfall process, overland flow occurs first on farmland, then on grassland, and finally on forestland; （2） soil surface coverage has a great impact on the occurrence and amount of overland flow. The runoff amount can increase 2-4 times after the coverage is removed; （3） the infiltration before the occurrence of overland flow will decrease because of higher gravel contents of soil, but it takes no effect on infiltration once overland flow becomes stable; （4） the runoff coefficient of the limestone soil forestland is greater than that of the yellow soil forest land, but less than that of the farmland; （5） three empirical infiltration models, including Horton＇ model, Kostiakov＇ model, and modified Kostiakov＇ model, were compared by using the observed results under rainfall simulation. The results showed that the Kostiakov＇ model performed better than both the Horton＇ model and modified Kostiakov model. According to the results of this research, the Kostiakov＇s model can be used to simulate rainfall infiltration when water erosion is modeled in the peripheral mountainous area of the Sichuan Basin.     

Study on the connectivity of heavy oil reservoirs by ultraviolet spectrum technique in the western part of the QHD32-6 oilfield

As a new method, the ultraviolet spectrum technique is applied to studying the connectivity of biode-gradable heavy oil reservoirs. The similarity of crude oils can be judged according to the extinction coefficient （E） because aromatic hydrocarbons and non-hydrocarbons have conjugated bonds and obvious absorption in the ultraviolet range, and different materials have different characteristics and additives. The relationship diagram is made in terms of the extinction coefficients （E） of the samples by taking E as the Y-axis and wavelength as the X-axis. The connectivity of oil reservoirs is estimated according to the curve positions and characteristic fingerprints of the sampies. The connectivity of part of the reservoirs in the western part of the QHD32-6 oilfield was studied with this method. The results showed that the connectivity of samples from wells F7 and F8 in the Nm-2 oil reservoir zone is good, that of samples from wells F17 and F20 in the Nm-1 oil reservoir zone also is good, and that of samples from wells F17, F19, and F20 is poor.     

Use of laser range and height texture cues for building identification

Airborne LiDAR has found application in an increasing number of mapping and Geo-data acquisition tasks. Apart from terrain information generation, applications such as automatic detection and modeling of objects like buildings or vegetation for the generation of 3-D city models have been explored. Besides the height itself, height texture defined by local variations of the height is a significant parameter for object recognition. The paper explores the potential of the analysis of height texture as a cue for the automatic detection of objects in LiDAR datasets. A number of texture measures were computed. Based on their definition and computation these measures were used as bands in a classification algorithm, and objects like buildings, single trees, and roads could be recognized.