Re-Os Age of Cu-Ni Ores from the Huangshandong Cu-Ni Sulfide Deposit in the East Tianshan Mountains and Its Implication for Geodynamic Processes

An isochron age of 282±20 (95% conf. limit) Ma of the sulfide ores in the Huangshandong Cu-Ni sulfide deposit, the East Tianshan Mountains has been obtained through Re-Os isotopic measurement. The age implies that the Cu-Ni sulfide deposit and other related deposits in the same area occurred in a Permian extensional environment of post-collision instead of Devonian-Early Carboniferous ophiolite-related oceanic or island arc environments inferred before. It shares the same ages with the orogenic and epithermal gold deposit systems in the same area. An initial 187Os/188Os ratio of 0.25±0.04 (1σ) and a γos value of 99 on average display the participation of large quantities of crustal components into the rock-forming and ore-forming system during mineralization and magmatic emplacement.     

大洋多金属结核研究概况

从多金属结核的分布及富集规律、物质成分、内部结构、形成机制等方面论述了目前国内外的一些研究动态,对目前在这一研究领域提出的一些新概念、新方法作了一定的介绍.在分析和总结前人研究成果的基础上,指出了在这一研究领域还存在的一些问题及今后研究的方向.     

吉林省土壤中有效锰、铜、钼和锌含量的时空变化

选择吉林省的五个大豆种植区(敦化、桦甸、榆树、农安、白城)、四个水稻种植区(白城、九台、延吉、梅河口)及3个草场分布区(镇赉、洮南、大安)，对其土壤中有效锰、铜、钼和锌的含量在过去20年的变化作了比较和分析。经研究表明：吉林省土壤中有效锰和有效铜含量较20年前有所增高，有效钼含量总体呈降低趋势，中部部分地区和东部地区土壤有效锌含量降低，其余地区含量增高。空间分布东部高于中西部。     

天然含钒金红石加热、淬火及电子辐射改性实验研究

天然含钒金红石样品经过1273K加热、淬火和高能电子辐照处理后性质发生不同程度的变化。XRD谱峰显示处理前后样品没有发生物相变化，显微IR图谱证明原样、加热、淬火样品的表面有少量吸附水存在，而辐射样品的显微IR图谱上没有检测到吸附水的吸收峰。用XPS分析比较了处理前后样品表面主要元素Ti、O和V的价态及含量，结果表明，原样经过处理后表面钒和氧的原子百分含量增加，其中淬火样品表面吸附水和钒的含量相对于原样增加最为明显，光催化活性相应较高；加热样品表面的吸附水和钒的含量比原样稍有增加，光催化活性与原样相当；电子辐射样品表面钒的原子百分含量相对原样增加不明显，而对水的吸附能力相对原样较低，光催化效率也略低。     

洛阳市水资源可利用量研究

以洛阳市为对象，对区域水资源的可利用量进行了研究。区域水资源量包括地表水实际可利用量和地下水实际可利用量。将地表径流中基流部分按比例划出，与河道汛期弃水量加在一起作为河道的生态需水量，从地表水资源量中扣除生态需水量后可得地表水的实际可利用量。将难以利用的地下水量从地下水资源量中扣除后可得地下水实际可利用量。     

2002年四川仁寿双流4.6级地震震害调查

2002年5月31日在四川省仁寿县与双流县交界地区发生一次ML4．6地震，震中烈度Ⅵ度。宏观震中大致在仁寿县高家镇以西一带，地震使部分民房遭到破坏，造成直接经济损失约545万元。     

An experimental study of nominally symmetric and asymmetric structures isolated with the FPS

This experimental investigation deals with the earthquake behaviour of a nominally symmetric and a mass‐asymmetric three‐storey structural model isolated with the frictional pendulum system (FPS). Both accidental and natural torsion are evaluated in the structure by using recorded accelerations in all building floors and measured deformations at the isolation level. A 3D‐shaking table was used to subject the model to five different ground motions, including impulsive as well as far‐field subduction‐zone type earthquakes. Results show that the analytical predictions of the earthquake behaviour of the isolated structure, as obtained from a physical model of the FPS, are in close agreement with the true complex inelastic measured behaviour of the FPS. Besides, experimental results also validate previous observations about the importance of accounting for the variability of the normal loads in modelling the earthquake behaviour of FPS isolators. Measured torsional deformation amplifications at the base of the building vary, in the mean, from 2.5% to 6% for the symmetric and asymmetric structural configurations, respectively. In relation to the fixed base structure, the reduction factors for the base shear of the isolated structure are, in the mean, about 3.9 for both configurations. Finally, it is concluded that the FPS is capable of controlling the lateral–torsional motions of mass‐asymmetric structures quite effectively by aligning the centre of mass of the superstructure with the centre of pendular and frictional resistance of the isolation system. Copyright © 2003 John Wiley & Sons, Ltd.     

Physical model for dynamic analysis of structures with FPS isolators

This article presents a physical model for frictional pendulum isolators (FPS) that is ready to be implemented in most commercial software. The model is capable of accounting for effects such as large deformations, sticking, and uplift and impact by sensing the normal loads in the isolators through a gap element. Sticking has been incorporated into the model by extending the Park–Wen hysteretic model to the case of large deformations. The proposed model has been tested against a theoretically ‘exact’ formulation leading to essentially identical results. To facilitate its use, the physical FPS model has been cast into a typical non‐linear structural element format, i.e. with deformation as input and restoring force as output. Examples of a building and a bridge have been chosen to show the potential of the element and to provide further insight into the earthquake response of structures with FPS isolators; in particular, in aspects such as the orientation in placement of the isolator, sticking, P? Δ, and other large deformation effects. Copyright © 2003 John Wiley & Sons, Ltd.     

特定基准下的异常位移诊断

针对地壳运动和变形研究中存在的位移资料的参考基准、异常位移等问题，主要讨论了位移资料特定基准的转换和异常位移诊断的数学模型——特定基准转换模型为七参数相似变换模型，转换保持了变形体内部相对位置关系不变，并使转换后的位移矢量更能体现区域内的相对运动信息；异常位移诊断采用拟准检定法(QUAD)，在选定拟准观测的情况下，使得位移真误差具有明显的分群性；模拟算例结果显示，本文采用的线性变换模型、粗差拟准检定法都表现出很好的效果。     

从激光扫描数据中进行建筑物特征提取研究

提出了一套基于建筑物几何特征的信息挖掘方案，并具体介绍了研究中采用的一些原理、方法与实用算法，从而可以直接从激光扫描数据中提取建筑物的平面外轮廓信息。利用本方案对车载激光扫描系统获取的城市建筑物试验数据进行了具体的处理，并给出了三维建模和可视化表达结果。