From subduction to transform motion: a seabeam survey of the Hellenic trench system

Preliminary results of a multi-narrow beam survey of the Hellenic trench system, in the Eastern Mediterranean, are presented. The southwestern Ionian branch is divided in small basins, partly filled with Pleistocene sediments. The morphology suggests that the basins are deformed by a compressional stress acting roughly perpendicularly to the trench along N50°E. This direction is the direction of the regional slip vector of the shallow thrust-type earthquakes. The structure of the southeastern Pliny-Strabo branch is quite different. Narrow en-e´chelon slots, oriented N40°E, have been mapped within the main troughs oriented N60°E. The regional earthquake slip vector is also oriented along N40°E. We conclude that the Hellenic trench system is an active subduction system, dominated by thrust along the Ionian branch and by transform motion along the Pliny-Strabo branch.     

动载作用下混凝土细观损伤的CT图像分割和灰度共生矩阵特征值研究

动载作用下混凝土随应力变化的系列CT图像完整地记录了混凝土内部破损过程,在CT图像中能直接观察到细观裂纹时混凝土往往已发生宏观破坏,挖掘混凝土材料损伤的细观信息是混凝土细观力学分析的核心。本文基于混凝土单轴动态压缩CT试验,获得不同应力阶段的横断面CT图像,分别应用图像分割技术和灰度共生矩阵法提取孔隙率和4个特征值,研究孔隙率和4个特征值随应力的变化规律。结果表明孔隙率随应力的增加显示出单调增加的总趋势,个别部位在应力水平较小时孔隙率随应力增加变化不大,反映出混凝土的压密效应。受压密效应影响,对比度在低应力水平时随应力增加有升有降,能量对应力变化不够敏感,相关性和同质性随应力的增加单调增加,对应力变化较为敏感,能反映混凝土整体损伤过程。对混凝土CT图像进行分区后再研究孔隙率、同质性和相关性随应力的变化,可以更好地反映动载作用下混凝土的细观损伤过程。     

An Application of HFE-D for Evaluating Sea Water Intrusion in Coastal Aquifers of Southern Vietnam

The coastal aquifers and inland waters of the Long Xuyen Quadrangle and Ca Mau Peninsula of southern Vietnam have been significantly impacted by sea water intrusion (SI) as a result of recent anthropogenic activities. This study identified the evolution and spatial distribution of hydrochemical conditions in coastal aquifers at this region using Hydrochemical Facies Evolution Diagram (HFE-D) and Geographical Information System mapping. Hydraulic heads and water chemistry were measured at 31 observation wells in four layered aquifers during dry and rainy seasons in early (2005), and more recent (2016), stages of agricultural development. Hydrochemical facies associated with intrusion or freshening stages were mapped in each aquifer after assigning mixing index values to each facies. The position of groundwater freshening and SI phases differed in Holocene, Upper Pleistocene, Middle Pleistocene, and Lower Pleistocene aquifers. The geographic position of freshening and intrusion fronts differ in dry and rainy seasons, and shifted after 11 years of groundwater abstraction in all four aquifers. The spatial and temporal differences in hydrochemical facies distributions according to HFE-D reflect the relative impact of SI in the four aquifers. The study results provide a better understanding of the evolution of groundwater quality associated with SI in a peninsular coastal aquifer system, and highlight the need for improving groundwater quality and management in similar coastal regions.     

Correspondence analysis applied to volcanic aerosols

A statistical analysis of volcanic aerosol based on 1,083 variables including concentration, grain-size and site variabilities establishes correlations between sites and among chemical elements.Variation curves of element concentration show parallel behaviour. High coefficients of correlation between anions and cations confirm associations between elements.     

Surface vibration due to a sequence of high speed moving harmonic rectangular loads

The transmission of vibrations over the surface of the ground, due to high-speed moving, vertical harmonic rectangular loads, is investigated theoretically. The problem is three-dimensional and the interior of the ground is modelled as an elastic half-space or a multilayered ground. The transformed solutions are obtained using the Fourier transform on the space variable. A new damping model in the spatial wavenumber domain, presented in Lefeuve-Mesgouez et al. [J. Sound. Vibr. 231 (2000) 1289] is used. Numerical results for the displacements on the surface are presented for loads moving with speeds up to and beyond the Rayleigh wave speed of the half-space.     

An automated salt‐tracing gauge for flow‐velocity measurement

This article introduces the SVG (salt‐velocity gauge), a novel automated technique for measuring flow velocity by means of salt tracing. SVG allows a high measuring rate (up to one every 2 seconds), short control section length (down to 10 cm), high accuracy (+[sol ]?1·5 cm s^?1), and unbiased calculation of the mean velocity in experimental conditions with turbulent, supercritical flow. A few cubic centimetres of saturated salt solution (NaCl) are injected into the flow at regular time intervals using a programmable solenoid valve. The tracer successively passes two conductivity probes placed a short distance downstream. The transformation of the signal between the two probes is modelled as a one‐dimensional diffusion wave equation. Model calibration gives an estimation of the mean velocity and the diffusion for each salt plume. Two implementations of the SVG technique are described. The first was an outdoors simulated rainfall experiment in Senegal (conductivity probes at 40 cm apart, 8 Hz measurement rate, salt injections at 10 second intervals). Mean velocity was estimated to range between 0·1 and 0·3 m s^?1. The second was a laboratory‐based flume experiment (conductivity probes at 10 cm apart, 32 Hz, salt injections at 2 second intervals). Another SVG with probes at 34 cm apart was used for comparison. An acoustic Doppler velocimeter (ADV) was also used to give an independent assessment of velocity. Using the 10 cm salt gauge, estimated mean velocity ranged from 0·6 to 0·9 m s^?1 with a standard deviation of 1·5 cm s^?1. Comparisons between ADV, 10 cm SVG and 34 cm SVG were consistent and demonstrated that the salt‐tracing results were unbiased and independent of distance between probes. Most peaks were modelled with r² > 90 per cent. The SVG technology offers an alternative to the dye‐tracing technique, which has been severely criticized in the literature because of the wide interval of recommended values for the correction factor α to be applied to the timings. This article demonstrates that a fixed value of α is inappropriate, since the correction factor varies with velocity, diffusion and the length of the control section. Copyright © 2005 John Wiley & Sons, Ltd.     

拱形波纹钢屋盖动力特性测试及分析

拱形波纹钢屋盖是一种新颖的金属拱形薄壳结构，在我国已经得到了广泛的应用。由于结构的复杂性，目前有关的理论研究尚不够深入，动力研究还很少有人涉及。以18m和30m两种跨度的W666型拱形波纹钢屋盖为研究对象，测试了拱在竖向平面内振动时的频率、振型及阻尼。在所提简化计算模型的基础上，采用有限元方法计算了结构的动力特性，其结果与试验数据符合较好。测试和分析结果为该结构的动力反应研究提供了方便。     

无验潮水深测量测深精度分析及检验

无验潮水深测量是利用RTK(real-time kinematic)测得的GPS天线精确的三维坐标确定定位点的平面位置,RTK高程结合由测深仪同步测得的水底点水深值换算出同一平面位置上定位点的水下高程或水深值.无验潮水深测量具有工作效率高,省工省时等特点.本文对无验潮及验潮水深测量方式的原理进行了介绍,对无验潮水深测量...     

3维场景植被冠层多波段模拟研究进展

植被冠层辐射散射信号中蕴含了丰富的植被信息,通过构建植被冠层辐射散射模型,可以实现植被结构等生物物理参数的遥感定量反演。迄今为止,可见光/近红外、热红外、微波波段均已发展了大量的模型,这些模型在参数反演方面各具优势,但不同波段的模型又有其自身的局限性。跨波段的联合模拟可以实现模型间的优势互补,进而提高地表参数的反演精度,近年来已有学者专注于可见光/近红外与热红外模型,热红外与微波模型,主被动微波模型,以及可见光/近红外与微波模型的联合模拟和协同反演,但多是两两联合,且主要是基于经验模型或解析模型。基于3维场景的植被冠层辐射散射特性模拟模型可以细致刻画不同组分的结构和空间分布特征,对于由植被结构引起的多次散射和组分比例变化的考虑具有优势。本文主要介绍了3维模拟模型在可见光/近红外、热红外和微波波段,以及跨波段联合模拟方面的研究进展,从模型机理、场景统一、以及组分理化参数的统一的角度,探讨了构建多波段3维模拟系统的可行性,展望了多波段3维模拟模型的发展趋势。     

基于GeoSOT剖分编码的不动产单元统一标识模型研究

针对现有不动产单元编码存在空间位置信息模糊的问题,以寻求更加直接反映空间位置的不动产编码为目标,在对现有不动产单元编码深入研究的基础上,提出了基于GeoSOT网格编码的不动产单元模型、编码方法,以及该模型与空间位置信息转换方案。试验证明,基于GeoSOT的不动产单元编码更加直观,具有很好的实用性。