The Mineral Adsorption and The Application of a Metamorphic Felsic Rock as Aggregate in Asphalt Pavements

Geotechnical and Geological Engineering - The aggregates consist approximately 85% of the total volume in asphalts pavements, and their properties influence directly their behavior. Therefore, it...     

An Analytical Solution for Mechanical Responses Induced by Temperature and Air Pressure in a Lined Rock Cavern for Underground Compressed Air Energy Storage

Mechanical responses induced by temperature and air pressure significantly affect the stability and durability of underground compressed air energy storage (CAES) in a lined rock cavern. An analytical solution for evaluating such responses is, thus, proposed in this paper. The lined cavern of interest consists of three layers, namely, a sealing layer, a concrete lining and the host rock. Governing equations for cavern temperature and air pressure, which involve heat transfer between the air and surrounding layers, are established first. Then, Laplace transform and superposition principle are applied to obtain the temperature around the lined cavern and the air pressure during the operational period. Afterwards, a thermo-elastic axisymmetrical model is used to analytically determine the stress and displacement variations induced by temperature and air pressure. The developments of temperature, displacement and stress during a typical operational cycle are discussed on the basis of the proposed approach. The approach is subsequently verified with a coupled compressed air and thermo-mechanical numerical simulation and by a previous study on temperature. Finally, the influence of temperature on total stress and displacement and the impact of the heat transfer coefficient are discussed. This paper shows that the temperature sharply fluctuates only on the sealing layer and the concrete lining. The resulting tensile hoop stresses on the sealing layer and concrete lining are considerably large in comparison with the initial air pressure. Moreover, temperature has a non-negligible effect on the lined cavern for underground compressed air storage. Meanwhile, temperature has a greater effect on hoop and longitudinal stress than on radial stress and displacement. In addition, the heat transfer coefficient affects the cavern stress to a higher degree than the displacement.     

Spalling Experiments on Large Hard Rock Specimens

Specimens of coarse-grained Äspö diorite were axially compressed to observe stress-induced spalling. The specimens had a novel design characterized by two manufactured large radius notches on opposite sides. The tangential stress occurring in the notches aimed to represent the tangential loading around a circular opening. Fracture stages were monitored by acoustic emission measurements. Rock chips were formed similar to those found in situ, which indicates a similar fracture process. Slabs were cut out from the specimens and impregnated using a fluorescent material to visualize the cracks. The cracks were subsequently examined by the naked eye and by means of microscopy images, from which fracture paths could be identified and related to different minerals and their crystallographic orientations. The microscopy analyses showed how the stress field and the microstructure interact. Parallel cracks were formed 2–4 mm below the surface, sub-parallel to the direction of the maximum principal stress. The crack initiation, the roles of minerals such as feldspar, biotite and quartz and their grain boundaries and crystallographic directions are thoroughly studied and discussed in this paper. Scale effects, which relate to the stress gradient and microstructure, are discussed.     

Strenulagus (Mammalia: Lagomorpha) from the Middle Eocene Irdin Manha Formation of the Erlian Basin, Nei Mongol, China

New material of Strenulagus solaris, a stem lagomorph, from the lower part of the Middle Eocene Irdin Manha Formation at the Irdin Manha and Huheboerhe localities, Erlian Basin, Nei Mongol, China includes remains of isolated cheek teeth, fragmentary upper incisors(d I2) and postcranial elements, reported from the species for the first time. The tarsal bones display advanced features, such as a wide calcaneofibular articulation surface and, along with an increase in hypsodonty, the new data document the early stage of lagomorph evolution in the Middle Eocene of the Erlian Basin. This finding is stratigraphically well constrained and probably predates that of the type material of S. solaris from the Khaychin Formation, Bugin-Tsav Basin, Mongolia.     

A New Species of Tsuga (Pinaceae) based on Lignified Wood from the Late Miocene of Central Yunnan, China, and Its Paleoenvironmental Implications

A new species, Tsuga nanfengensis sp. nov. (Pinaceae), is described on the basis of lignified fossil wood from the late Miocene of the Xianfeng Basin, central Yunnan, southwestern China. Detailed observation of the fossil wood specimens show the following characteristics: distinct growth rings, absence of resin canals, uniseriate bordered pits in the radial wall of tracheids, ray tracheids and piceoid and cupressoid cross-field pits. These features indicate similarities to the wood of extant Tsuga canadensis, T. chinensis, and T. dumosa. According to the fossil record, Tsuga was present in Xundian County during the Miocene. Today Tsuga is drought intolerant, preferring wet conditions with no extant species growing naturally in Xundian County. The presence of Tsuga in the Miocene of Xundian County indicates a humid climate consistent with previous palaeoclimatic reconstructions showing a wetter and probably shorter dry season in the Miocene, relative to the present day. Therefore, the change in the local climate such as increasing aridity through the Miocene might explain the local extinction of Tsuga from central Yunnan.     

Geostatistics as a groundwater exploration planning tool: case of a brackish-saline aquifer

This paper discusses a geostatistical approach to model a groundwater aquifer in 3-D. The study aims at utilizing geostatistics as a tool for characterizing zones of better-water quality in a brackish-saline aquifer. In particular, the geostatistical model was constructed to characterize the aquifer’s salinity, represented by total dissolved solids (TDS), using logs of porosity and resistivity. Quality-checked estimated TDS vertical profiles were employed to construct and model horizontal and vertical semivariograms. Parameters of semivariogram models were used to develop both the kriging plan and the generated model. Results of this modeling process are shown in the form of horizontal salinity distribution maps. The aquifer was sliced into 20 layers, each 20 m thick, to represent its overall thickness. Salinity layers maps reflect vertical stratification of TDS concentrations in the aquifer and show that water quality deteriorates with depth and toward the northern part of the aquifer. Relatively better-quality water (TDS ≤10,000 mg/l) can be found at depths between 100 and 250 m below the aquifer’s top in both eastern and southeastern parts. Water in the same interval to the western and southwestern parts reflects the presence of higher TDS concentration. From a planning point of view, it is more feasible to target the eastern part of the aquifer for pumping and desalination purposes. In addition, the generated model could be utilized as an initial condition for flow simulation.     

Occurrence of diagenetic alunites within karst cavity infill of the Dammam Formation,Ahmadi, Kuwait: an indicator of hydrocarbon gas seeps

Alunite minerals occur as white powdery lumps and laminated coloured deposits within cavity and solution channel infill of the palaeokarst zone of the Upper Eocene Dammam Formation. This formation is exposed in a quarry located on the Al Ahmadi ridge within the Greater Burgan oil field in southern Kuwait. Field occurrences and sedimentary structures of the alunite deposits were described. Collected samples were petrographically described, and their mineralogy and geochemistry were determined using X-ray diffraction and X-ray fluorescence, respectively. Microfabrics were investigated using SEM, revealing that they are primarily composed of fibrous alunogen (hydrous aluminium sulphate) and pseudo-cubical K-alunite (hydrous potassium aluminium sulphate). Their mode of occurrence suggests a hypogenetic origin, where sulphide gases associated with hydrocarbon gases reacted with an Al-rich solution leached from clay minerals and feldspars of the cavity-fill muddy sand sediments. The hydrocarbon gases may have seeped from sub-surface petroliferous formations within the Greater Burgan oil field along vertical fractures. This study suggests that these acidic seeps may have played a role in the development of the palaeokarst zone of the Dammam Formation.     

Contribution of atmospheric processes to the degradation of air quality: case study (Sohar Industrial Area,Oman)

The impact of the air pollution generated by any industrial activities may be further aggravated if the location of the industrial area is exposed to certain atmospheric characteristics. Under such conditions, the likelihood of accumulation of local air pollution is high. This paper uses two approaches (statistical and numerical simulation) to investigate the contribution of atmospheric processes towards degradation of air quality. A case study of the two approaches was conducted over Sohar Industrial Area in the Sultanate of Oman. Measured wind data were used to account for specific atmospheric characteristics such as stagnation, ventilation, and recirculation using the statistical approach. In the second approach, numerical weather prediction model was used to simulate mesoscale circulation phenomena such as sea breeze and its contribution to the processes affecting the air quality. The study demonstrates that the atmospheric processes appear to contribute substantially to the degradation of air quality in the Sohar Industrial Area. The statistical analysis shows that the atmospheric dilution potential of Sohar Industrial Area is prone to stagnation and recirculation, rather than ventilation. Moreover, model simulation shows that there is a seasonal variation in the contribution of atmospheric processes to the degradation of the air quality at Sohar Industrial Area.     

Ground penetrating radar-based experimental simulation and signal interpretation on roadway roof separation detection

Roof separation is one of the major indications for coal mine roadway roof accidents. Therefore, it is important that efforts be made to detect roadway roof separation. Currently, the instrument used for detecting roadway roof separation is the roof-off-the-strata indicator, but its installation and use is complicated and the need is greater than can be managed. This thesis takes ground penetrating radar (GPR) as a means for roof separation detection and analyzes its feasibility for use in detecting roof separation both theoretically and experimentally. First, numerical simulation experiments on roof separation detection are carried out using GprMax2D software. The results show that it is feasible to detect roof separation by using GPR electromagnetic waves. Next, physical simulation experiment on roof separation detection is carried out using MALA GPR (RAMAC/GPR). Lastly,  the traditional image segmentation algorithm of 2D maximum between a cluster variance is improved to interpret the GPR signal. Good results were achieved using the improved algorithm to interpret detection signals of roof separation by GPR in a physical simulation experiment.