Research on Water-Taking Characteristics of Huanghua Power Plant Reach

In this paper the water-taking characteristics of the first,the second and the third stage of theHuanghua Power Plant are studied by numerical model and physical model.The results show that the pres-ent inlet channel only satisfies the supply need of the first stage of the power plant.If the riverbed of the in-let reach is properly dredged,the need of water supply for the third stage of the power plant could be met.     

“海龙Ⅲ”号ROV系统深海试验与应用研究

深海水下机器人主要用于深远海地质、矿物资源和生物调查研究,以及海洋石油工程服务等水下综合作业,能够实现深海近底高精度、长时间的定点取样作业及其他精细化调查。结合国内外深海ROV装备和技术发展现状,以新研发的6 000 m级"海龙Ⅲ"号ROV搭载"大洋一号"船执行的2018年南海综合海试和48航次为例,从深海试验流程和方法、浅水区功能测试、深水区功能测试、深海观测及取样功能测试等方面,详细阐述了ROV海上试验和应用作业过程,对作业水深、功率配置、水下运动能力、搭载能力等关键性能指标进行了试验验证。海上功能测试和试验性应用结果表明,"海龙Ⅲ"ROV各项性能指标满足设计要求,验证了系统在不同深度、不同地形条件下的观测取样作业能力,创新了深水ROV作业方法手段,分析得出此类装备目前在国内发展存在的不足之处,并结合实际应用提出后期改进计划,以期为深海ROV的海试应用提供技术参考。     

粤西海域水质评价方法的研究及应用

针对海洋水质评价问题,建立了一套先利用主成分分析法明确各水质指标权重关系,继而参考权重关系依照海水水质分类标准建立分类样本,最终通过判别分析方法建立判别函数实现水体自动分类的方案。该方案在粤西海域,水体分类回判符合率达到91.4%。依据自动分类结果绘制了粤西海域2008—2010年水体分布专题图,为粤西海域环境污染防治提供了决策依据。     

A modified analytical method for the shipboard determination of nanomolar concentrations of orthophosphate in seawater

A method for the determination of nanomolar concentrations of orthophosphate in oligotrophic seawater developed by Liang et al. (2007) has been modified to make it fully feasible for shipboard application and for faster sample throughput with minimized sample volume. The technique is based on the flow injection method with solid phase extraction on a Sep-Pak C18 cartridge and colorimetric detector. The Schlieren effect was minimized by rinsing the cartridge sequentially with 5 mL water and 2 mL 95% ethanol solution. With three micro pumps in parallel, savings of up to 80% in amount of reagents and 25% volume of seawater samples could be achieved in comparison to the previous method. Variation of stopped flow time and sample loading time gave 3 different standard curves, which corresponded to 3 linear ranges within 3.4 and 515 nM. The modified method permits the analysis of samples over a wide range of concentrations, and has been successfully applied to shipboard determination of trace orthophosphate in more than 200 seawater samples during a one-month cruise in the South China Sea. For seawater at concentrations of 20.6, 82.5, 206.2 nM orthophosphate, the relative standard deviations (RSD) (n = 6), determined daily for 6 days on board ship were 4.45%, 4.73% and 6.75%, respectively. Five seawater samples collected in the Station SEATS (South East Asia Time Series Station at 18°N, 116°E) were analyzed using the present method both on board and in a land-based laboratory, as well as with the magnesium hydroxide-induced coprecipitation (MAGIC) method, and showed no significant difference according to the statistical t-test.     

Evaluation of Inference Adequacy in Cumulative Logistic Regression Models: An Empirical Validation of ISWRidge Relationships

Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p 〈0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions p^1, p^2 and p^3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to cheek the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height （X1 ） and potential energy （X2 ） significantly impact （p 〈 0. 0001 ） the amplitude-based refleeted rate; the P-values for the deviance and Pearson are all 〉 0.05 （0.2839, 0.3438, respectively）. That is, the goodness-of-fit between ridge height （ X1 ） and potential energy （X2） can further predict parameters under the scenario of the best parsimonious model. Investigation of 6 predictive powers （ R2, Max-rescaled R^2, Sorners＇ D, Gamma, Tau-a, and c, respectively） indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.     

Evaluation of Inference Adequacy in Cumulative Logistic Regression Models： An Empirical Validation of ISW-Ridge Relationships

Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p<0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions p^1, p^2 and p^3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to check the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height (X1) and potential energy (X2) significantly impact (p<0.0001) the amplitude-based reflected rate; the P-values for the deviance and Pearson are all >0.05 (0.2839, 0.3438, respectively). That is, the goodness-of-fit between ridge height (X1) and potential energy (X2) can further predict parameters under the scenario of the best parsimonious model.Investigation of 6 predictive powers (R2, Max-rescaled R2, Somers'D, Gamma, Tau-a, and c, respectively) indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.     

我国海洋文化事业发展现状和建设研究

在对我国海洋博物馆、海洋意识教育基地、海洋文化节庆活动、海洋文化论坛和海洋文化教材等领域的基本情况进行调研和分析的基础上,文章概括我国海洋事业发展的总体情况、地域范围和开展形式以及发展趋势,提出目前存在的海洋文化宣教涉及面不广、理论研究不足和国际影响力尚待提升等问题;借鉴发达国家博物馆大众化、节假日法定化和教育社会化等海洋文化事业发展经验,提出全面普查收集信息、创新教育形式、丰富展现形式和扩大群体覆盖面等举措,以促进我国海洋文化事业繁荣发展。     

水力停留时间对硫自养还原高氯酸盐和硝酸盐性能的影响

以填充单质硫颗粒(S0)的生物膜反应器作为研究对象,研究了水力停留时间(HRT)变化对硫自养还原高氯酸盐(ClO-4)和硝酸盐(NO-3)性能的影响。研究结果表明,在进水NO-3-N和ClO-4分别为20mg/L和100μg/L时,在HRT从16h逐渐缩短到0.5h过程中,NO-3-N去除率能在较短时间内达到99%以上。与硫自养还原NO-3-N相比,HRT的缩短导致ClO-4去除率趋于稳定所需时间增加,说明硫自养还原NO-3-N过程先于硫自养还原ClO-4的过程。在不同HRT下未发现中间产物ClO-3和ClO-2的积累,ClO-4摩尔数减少量与Cl-摩尔数增加量比约为1∶1,出水中SO2-4的实际产生量远大于理论产生量,出水pH值范围为6.8~7.1。通过PCR-DGGE图谱和测序结果分析可知,属于α-proteobacteria菌群在反应器中占优势地位,β-proteobacteria菌群次之。其中,具有NO-3和ClO-4还原能力的Denitromonas sp.和Azospirillumsp.存在于反应器的底部、中部和上部的生物膜,能还原ClO-4的Dechloromonas sp.MissR被发现存在于反应器中部和上部的生物膜。     

福建省平潭岛东北部软质海崖蚀退特征研究

为了揭示软质海崖的侵蚀机制,现场利用量测方法研究了福建省平潭岛东北部软质海崖的蚀退特征、蚀退模式和影响因素,并利用自制崩解仪测试了砂土和粉质黏土的崩解速率。结果表明,软质海崖滑塌物体积、堆积距离均随海崖高度增加而增大,每次滑塌海崖蚀退距离位于0.08~1.23 m;滑塌物覆盖住崖脚后具有临时保护崖脚的作用,但由于其受到扰动较易发生再次蚀退;崖脚海蚀槽的形成对滑塌起到重要控制作用;降雨、海洋水动力、强风和人为活动是造成蚀退的四大因素;在土体抗侵蚀方面,砂土的抗侵蚀能力最弱,粉质黏土的居中,黏土的最强;现场干燥粉质黏土的崩解速率为2.4 cm/min。     

2008年中国沿岸冬季寒潮激发陆架波的小波分析

This study applies the wavelet analysis to the tidal gauge records, alongshore winds, atmospheric temperature and pressure along the China coast in winter 2008. The analysis results show three events of sea level oscillations(SLOs) on the shelf induced by winter storms. The first event occurred from January 9 to 21. The SLO periods were double-peaked at 1.6–5.3 and 7.0–16.0 d with the power densities of 0.04–0.05 and 0.10–0.15 m2·d, respectively.The second event occurred from February 5 to 18. The SLO period was single-peaked at 2.3–3.5 d with power density of 0.03–0.04 m2·d. The third event occurred from February 20 to March 8. The SLO periods were doublepeaked at 1.5–4.3 and 6.1–8.2 d with the power densities of 0.08–0.11 and 0.02–0.08 m2·d, respectively. The SLOs propagated along the coast from Zhejiang in north to Guangdong in south. The phase speeds ranged about 9–29m/s from Kanmen to Pingtan, 5–11 m/s from Xiamen to Huizhou and 11–22 m/s from Huizhou to Shuidong. The dispersion relation of the SLOs shows their nature of coastal-trapped wave.