Short-term consequences of a benthic cyanobacterial bloom (Lyngbya majuscula Gomont) for fish and penaeid prawns in Moreton Bay (Queensland, Australia)

This study examined the phenology and ecological consequences of a benthic filamentous cyanobacterial bloom (Lyngbya majuscula) in Deception Bay (Moreton Bay, Queensland, Australia). Bloom initiation occurred in mid December 1999 and expanded to encompass an 8 km² area by April 2000. Small fish and penaeid prawns (<25 cm total length) were quantitatively sampled through periods designated as before, during and after the bloom using a combination of pop-netting within mangroves and beam trawling over adjacent seagrass beds. Data on larger-bodied fish were compiled from daily fishing logs provided by local commercial fishers. Changes in dry mass of bloom material caught in nets and changes in water chemistry were also measured. Mean concentrations of ammonia-N in residual water within mangroves were several orders of magnitude higher in the affected area than in the control and dissolved oxygen was markedly lower in affected areas. Across the study area, mean density, live mass and number of species declined during the bloom, with fish assemblages using mangroves showing greater decline than assemblages using seagrasses. Response at the species level was highly variable; generally, epibenthic species showed a more sustained decline than demersals. Mean monthly fish catch was significantly lower in bloom than non-bloom years. This study has also demonstrated that throughout the bloom, the affected area continued to support a highly diverse and abundant fish and prawn assemblage, and probably maintained its function as an important nursery habitat for many species.     

Nature and composition of shore-zone sediments between Jeddah and Yanbu, eastern Red Sea

The shore-zone sediments between Jeddah and Yanbu, west coast of Saudi Arabia, are composed mostly of skeletal carbonate sands. The nearshore sediments containing benthic foraminifera, algal fragments and molluscs are multimodal, the mean grain size varying between 0.76 and 2.35 ø. The beach sediments, except samples dominated by cerithid gastropods in some localities, are relatively finer than the nearshore sediments. Although the beaches to a great extent comprise sand-sized material, fine lime muds and coarse clastic gravels occur in certain areas. The dune sediments comprising mostly algal grains and ooids are very fine with 50 percent of the material in the 0.25–0.18 mm size grade. Except a general northward decrease in mean grain size, regional trends in the textural parameters of the sediments between Jeddah and Yanbu are not quite apparent. Lateral variations in the textural characteristics suggest a landward migration of the sediments in the shore zone under the influence of northerly and northwesterly winds. The carbon and oxygen (δ ¹³C + 4.80 to 4.84‰ PDB) (δ ¹³O − 0.04 to + 0.53‰ PDB) isotopic ratios of the lime muds occurring in certain shallow margins in the shore-zone, which are much higher than those of the green algae, indicate that the fine carbonates are at least in part inorganic in origin.

Like the shallow-water carbonates in tropical seas, aragonite and high Mg-calcite are the dominant carbonate minerals in the shore-zone sediments. There is a landward increase in aragonite contents caused by the landward migration of fine material from the nearshore. The dominant clay mineral in the nearshore sediments is kaolinite with subordinate swelling chlorite and little illite. Kaolinite is contributed by the coastal regions under the sub-tropical humid climate. Swelling chlorite is considered to have been formed in the nearshore by mechanical mixture of chlorite and montmorillonite derived from the metamorphic and igneous terrains of the Tertiary mountains bordering the coastal plain.     

Composition and Useful Properties of Tailings of Marine Manganese Nodules and Crusts

Marine manganese nodules and crusts, when processed, yield tailings which may be utilized for environmental and economic benefit. The key to the reasonable and effective utilization of these tailings lies in making a systematic appraisal of their composition and properties. This article gives an introduction to the investigation of manganese tailings properties. The tailings have a high iron and/or manganese content, high surface area, high porosity, and fine grain size. Some tailings have a high rare earth element content which is valuable. They may also have high SO₃, arsenic, and uranium contents which are harmful. Depending on the process used to produce the tailings, there will likely be some differences in chemical composition, mineral assemblages, surface area and adsorption capability, pore diameter and volume, density and pH. In assigning potentially beneficial applications for these tailings, these differences should be taken into account to optimize utilization.     

In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

Seamount gravity anomaly modelling with variably thick sediment cover

Inversion modelling of marine gravity anomalies to derive predicted seafloor topography has provided significant advance in delineating deep-ocean bathymetry where the seafloor both conforms to the half-space cooling model of seafloor spreading, and largely sediment-free. Similar modelling for elevated ridges and seamounts, that are formed by processes other than seafloor spreading and/or have proximal sediment sources (e.g., continental margins and volcanic arcs), have significantly higher errors when validated against modern shipborne echo-sounding data. A three-dimensional, five-layer gravity model is emulated for the cases of both synthetic and real seamounts, with varying degrees of sediment burial, to establish the sensitivity of variable sediment cover as a source of error. A simple `Gaussian' seamount with base radius of 30 km, 2000 m of relief, has a maximum 140–160 mGal anomaly, that decreases to 50 mGal with the addition of 1 km of sediment cover with simple `flood' geometry. Complete burial, with a typical sediment density of 2300 kg m^–3, results in a 120 mGal difference from a sediment-free seamount model. Increasing sediment density results in an exponential decay of the seamount anomaly. More complex synthetic geometries of varying basement relief and sediment thickness show that the anomaly amplitude remains significant, especially where the latter is >700–800 m thick. For the real case, seamounts of the Three Kings Ridge (northern New Zealand) imaged with seismic reflection data, with varying degrees of sediment cover of up to 1 km, when modelled both with and with-out the inclusion of a sediment layer, typically have rms differences of 30 mGal between observed and modelled gravity anomalies. Significantly, the rms errors are reduced by 50% with the inclusion of a sediment layer that corresponds to a reduction of predicted seafloor topography rms errors of 192–684 m to 78–360 m.     

The Spatial Distribution of Caprellidea (Crustacea: Amphipoda): A Stress Bioindicator in Ceuta (North Africa, Gibraltar Area)

Abstract. The caprellid (Crustacea: Amphipoda) community associated with the alga Cystoseira usneoides (L.) Roberts 1967 was studied on a spatial scale in relation to the influence of environmental factors on the coast of Ceuta (North Africa) using multivariate analyses. Twenty-two stations were sampled and five environmental factors were tested (hydrodynamics, silting, suspended organic matter, organic matter in silt and suspended solids). The spatial distribution of the caprellid community reflected the physico-chemical conditions of the coast. Phtisica marina Slabber 1769 was the only species present at the stations of the harbour of Ceuta, characterised by the lowest values of hydrodynamics and the highest values of silting, suspended organic matter and suspended solids. The most exposed stations (high hydrodynamics and low values of silting, dissolved organic matter and suspension solids) were mainly dominated by Caprella danilevskii Czerniavskii 1868 and C. penantis Leach 1814. These two species have developed a "parallel" posture that enables them to attach strongly to the substratum and thus inhabit areas subjected to heavy exposure or strong currents. Caprella acanthifera Leach 1814 and Pseudoprotella phasma (Montagu 1804) preferred stations characterised by moderate values of silting and suspended solids, such as those located in the coastal areas in front of the city of Ceuta, but these species were not found at the most stressed harbour stations.