湖北宜昌重要地质遗迹资源特征及发展模式探讨

本文系统总结了湖北宜昌地区省级及省级以上地质遗迹资源,认为该地区地质遗迹分布规律主要可概括为两个方面,一是受控于地形和河流的综合作用,以各类地貌景观遗迹为特点;二是各个地质时代地层剖面齐全,古生物化石产地聚集。其中可归类为世界级地质遗迹点为5个,均以“古生物化石”为核心,分别为三峡地区埃迪卡拉生物群、长阳寒武纪清江生物群、黄花场中奥陶统大坪阶“金钉子”、王家湾上奥陶统赫南特阶“金钉子”和远安三叠系南漳—远安动物群。立足于此,文中首次详细总结了这些地质遗迹点的化石代表、科学及科普意义,并从地质遗迹自身保护和应用方式、地质遗迹载体、地学研学、地质文化的传播和文创科普产品5个方面对古生物地质遗迹资源的发展模式进行了详细探讨,从而为宜昌地区全域地质遗迹开发和旅游提供新思路。     

近红外CO2高光谱探测仪通道选择

近红外波段 (1.6 μm) 遥感可探测大气CO₂含量信息,应用于碳循环研究中。宽波段、高分辨率不但对仪器研制是一个挑战,而且巨大的数据量对观测的正演、反演也是一个挑战性课题。该文应用自由度及信息量分析法,对近红外高光谱波段中探测通道进行CO₂信息量分析,选择前20~100个高信息量的CO₂探测通道,并进行了反演模拟测试。结果表明:前20个高信息量通道占所有通道总信息量的76.4%,仅用所选的前20个通道进行反演,与所有通道参加反演的结果相比,误差增加0.3×10-6;通道数增至60时,信息量增加,通道数再增加,信息量则增加不显著;CO₂反演误差存在相似的关系。在高CO₂信息量分布上,弱吸收性质的1.6 μm波段和强吸收性质的2.06 μm波段表现出不同特点。     

北京环城游憩带旅游地类型与空间结构特征

本文针对我国城市居民以城市周边为目的地近距离旅游日益增长的现象 ,以北京市行政区域内除东城、西城、崇文、宣武四个城区以外 14个区县中的 2 35处旅游地作为研究样本 ,按照地复合分类法根据旅游地的资源属性和旅游活动的性质将旅游地分为 9种类型 ,根据北京市情况可归并为 4类 ;运用空间结构、计量地理学理论以及地理信息系统、电话调查等技术手段 ,将四类 2 35处旅游地的大量数据分别进行了城市中心距离、回转半径法、空间分布曲线、空间离散指数等旅游计量地理研究 ,从而得出北京环城游憩带旅游地的空间结构特征     

基于遥感数据的青藏高原热环境调查

本文以地球系统科学和地球力学为理论基础,以遥感(RS)、地理信息系统(GIS)、全球定位系统(GPS)为技术支撑,利用亚东-格尔木-锡铁山走廊域的地学剖面实测温度数据和青藏高原MODIS遥感影像数据,分析研究了青藏高原亚东-格尔木-锡铁山走廊域的热环境特征.通过研究表明,研究区域内热环境总体分布规律为中东部最高,东南部次之,西北部最低.     

地下水水动力弥散问题中弥散度的单孔确定方法研究

本文提出了利用单孔进行弥散实验,确定地下水含水层弥散度的新方法,给出了数学模型、求解过程及方法。提出了用计算机自动处理求得最佳参数的直线回归法与非线性迭代法相结合的方法。不但进行了理论上的详细推导,而且通过实例进行了验证,结果很好。本文提出的方法原理通俗易懂,计算过程简单,易于实行,成本低,具有重要实际意义。     

陇中黄土高原土壤水分变化特征及其机理分析

基于兰州大学半干旱气候与环境观测站（SACOL）2010年全年的观测资料,对陇中黄土高原半干旱区土壤水分的年变化和日变化特征进行了研究,并通过计算水汽通量与蒸散量,探讨了土壤-地表-大气间水分的交换和运移机理。结果表明：土壤湿度的季节变化主要受降水影响,各季节的平均土壤湿度均呈现出表层和深层低、中间层高的特点,最高值出现在地下10 cm附近;在无降水的情况下,土壤5~20 cm处的含水量呈现出夜间逐渐降低、白天逐渐上升的波形变化,这种变化与土壤水汽通量具有很好的一致性,而水汽通量的方向则受温度梯度的影响;在白天,地表温度高于气温与较深层地温,水汽在向空气蒸散的同时也由地表流向土壤深部,夜晚地表温度则低于较深层地温,水汽由土壤深部流向地表。因此土壤内部的水分蒸发主要出现在夜晚,且主要发生在地表40 cm以内的土壤孔隙中,而白天地表的实际蒸发主要存在土壤浅层0~5 cm,5 cm以下土壤水分的蒸发十分微弱。本研究结果对于改进半干旱区陆面计算模式以及当地的生态环境建设具有一定的参考价值。     

Improved Priority‐Flood method for depression filling by redundant calculation optimization in local micro‐relief areas

Depression filling is a critical step in distributed hydrological modeling using digital elevation models (DEMs). The traditional Priority‐Flood (PF) approach is widely used due to its relatively high efficiency when dealing with a small‐sized DEM. However, it seems inadequate and inefficient when dealing with large high‐resolution DEMs. In this work, we examined the relationship between the PF algorithm calculation process and the topographical characteristics of depressions, and found significant redundant calculations in the local micro‐relief areas in the conventional PF algorithm. As such calculations require more time when dealing with large DEMs, we thus propose a new variant of the PF algorithm, wherein redundant points and calculations are recognized and eliminated based on the local micro‐relief water‐flow characteristics of the depression‐filling process. In addition, depressions and flatlands were optimally processed by a quick queue to improve the efficiency of the process. The proposed method was applied and validated in eight case areas using the Shuttle Radar Topography Mission digital elevation model (SRTM‐DEM) with 1 arc‐second resolution. These selected areas have different data sizes. A comparative analysis among the proposed method, the Wang and Liu‐based PF, the improved Barnes‐based PF, the improved Zhou‐based PF, and the Planchon and Darboux (P&D) algorithms was conducted to evaluate the accuracy and efficiency of the proposed algorithm. The results showed that the proposed algorithm is 43.2% (maximum) faster than Wang and Liu's variant of the PF method, with an average of 31.8%. In addition, the proposed algorithm achieved similar performance to the improved Zhou‐based PF algorithm, though our algorithm has the advantage of being simpler. The optimal strategies using the proposed algorithm can be employed in various landforms with high efficiency. The proposed method can also achieve good depression filling, even with large amounts of DEM data.     

Early Mesozoic unroofing pattern of the Dabie Mountains (China): Constraints from the U-Pb detrital zircon geochronology and Si-in-white mica analysis of synorogenic sediments in the Jianghan Basin

This paper presents the results of an integrated U-Pb detrital zircon geochronology and Si-in-white mica analysis for synorogenic sediments in the Jianghan Basin to the south of the Dabie Orogen. The results provide an improved understanding of the provenance of these sediments and the unroofing pattern of the early Mesozoic Dabie Mountain. Si contents of detrital white micas range from 3.09 to 3.34 atoms pfu for the upper Triassic sandstones whereas 3.06 to 3.59 atoms pfu for the lower and middle Jurassic sandstones. The majority of detrital white micas in the lower Jurassic sandstones is phengitic and originated exclusively from the Dabie high- to ultrahigh- pressure rocks. The U-Pb dating results of the detrital zircons for seven samples suggest that these synorogenic sediments have a significant change of provenance from late Triassic to early and middle Jurassic. For the upper Triassic sandstone, the U-Pb age clusters of these zircons are characterized by ~ 420-450 Ma, ~ 750-820 Ma, ~ 1050-1200 Ma and ~ 2500 Ma with minor Luliangian (~ 1700–2000 Ma) components. In contrast, the zircon ages of the Jurassic sandstones are dominated by the Luliangian (~ 1700–2000 Ma) ages with only minor Caledonian (~ 420-450 Ma) and Greenville (~ 1050-1200 Ma) ages. In combination with other available geological data, it can be concluded that the Dabie HP-UHP rocks might initially be exposed to the surface at the beginning of early Jurassic (~ 190 Ma). The Jiangnan terrain (also named “Jiangnan old continental in Chinese) to the south of the Jianghan basin provided the predominant supply of upper Triassic sediments, whereas the Paleoproterozoic Yangtze crustal materials (overlying the present Dabie Complex at the time) were the important provenance of the Jurassic sediments in the Jianghan basin.     

弧后盆地的形成与演化探讨：以东亚陆缘区为例

通过对弧后盆地大地构造体制的讨论，作者认为基属活化作用的产物根据地质，地球物理，地球化学等资料的分析，作者提出结论认为，由于东亚岛弧系岩石圈的均衡作用及海沟外侧冷却大洋岩石圈块体的下沉拖曳牵引等作用，使软流圈在岛弧系下方发生分异，这种分异作用带动东亚陆缘向东扩张，从而产生弧后的张开。     

Measurement of aerosol effective density by single particle mass spectrometry

Single particle mass spectrometry has been widely used to determine the size and chemical compositions of atmospheric aerosols; however, it is still rarely used for the microphysical properties measurement. In this study, two methods were developed for determining aerosol effective density by a single particle aerosol mass spectrometer (SPAMS). Method I retrieved effective density through comparison between measured light scattering intensities and Mie theoretical modelled partial scattering cross section. Method II coupled a differential mobility analyzer (DMA) with SPAMS to simultaneously determine the electric mobility and vacuum aerodynamic diameter, and thus the effective density. Polystyrene latex spheres, ammonium sulfate and sodium nitrate were tested by these methods to help validate their effectiveness for determining the aerosol effective density. This study effectively extends SPAMS measurements to include particle size, chemical composition, light scattering, and effective density, and thus helps us better understand the environment and climate effects of aerosols.