Inter- and intra-annual trend analysis of water level and flow in the middle and lower reaches of the Ganjiang River,China

ABSTRACT

The Ganjiang River is the largest tributary of Poyang Lake in China, and its hydrological regime variation greatly affects the utilization of regional water resources and the ecological environment of the lake. In this study, a novel trend analysis method, the Moving Average over Shifting Horizon (MASH), was applied to investigate the inter- and intra-annual trends of flow and water level from 1976 to 2016 at the Xiajiang and the Waizhou hydrological stations in the Ganjiang River. The Significant Change Rate Method (SCRM) was proposed to determine the MASH averaging parameters. The trend analysis results show a statistically significant decrease in water level series throughout the year and the relationship of flow and water level have changed greatly at the Waizhou station. The sediment load reduction, large-scale sand mining and water level decrease of Poyang Lake are identified as the main causes for the water level decrease.     

高寒退化草地中垫状点地梅的生态系统工程师作用

垫状植物是高寒地区广泛分布的一类具有特殊形态的植物,被称为高寒生态系统工程师,其在高寒退化草地中的作用如何?本研究以位于西藏当雄念青唐古拉山脉南坡4500m的一处高寒退化草地为例,调查了垫状点地梅覆盖区域内外的物种多样性、土壤养分以及水分的差异。结果表明:垫状点地梅可以显著改善土壤养分,提高幅度大约为16%-48%,其中有机质和总氮(N)分别增加了16.2%和18.9%;局部土壤含水量提高约12%;样方内的物种丰富度(S)、Shannon-Wiener指数(H)和Simpson指数(D)都随着垫状点地梅盖度的增加而呈增加的趋势。垫状点地梅在退化草地中具有显著的改善土壤微环境和提高群落物种多样性的作用,应加强保育以促进高寒退化草地的恢复。     

Spatio‐temporal variation in density and size structure of the endangered sea cucumber Isostichopus fuscus in Huatulco National Park,Mexico

The brown sea cucumber Isostichopus fuscus (Ludwig, 1875) has been subjected to strong fishing pressure and is currently considered an endangered species by the IUCN Red List of Threatened Species. Spatial and temporal variations in density were analysed and population parameters of I. fuscus were estimated in three localities of the Southern Mexican Pacific. Density was estimated using circular transects covering a 300 m² area in each locality. Body length and weight were also measured. The mean density was 0.018 ± 0.013 individuals·m^?2, and was statistically significantly lower during summer. The mean length and weight were 22.4 ± 3.8 cm and 396 ± 130 g, respectively, and statistically significant differences were found among localities. The weight–length relationship was W = 0.28·L^1.32 and the mean relative condition index (Kn) = 1.04 ± 0.31. The von Bertalanffy growth equation was L_t = 38.7·(1–exp^(?0.4·t)). The lowest values of length, weight and age were found at Dos Hermanas, suggesting that this locality could be favorable for the settlement of larvae and recruitment and growth of juveniles. The present study is the second to estimate densities of I. fuscus and the first one to publish data on size structure and growth for the population at Bahias de Huatulco. The densities were so low in the three sampled localities that none of them would be able to support a fishery, even under a sustainable management scheme. The information collected in the present study could be helpful for management programs of the Huatulco National Park, as all the data used for these currently come mainly from the populations of I. fuscus in the Gulf of California.     

Ore deposits and epithermal evidences associated with intra-magmatic faults at Aïn El Araâr-Oued Belif ring structure (NW of Tunisia)

International Journal of Earth Sciences - Hydrothermal ore deposits at Aïn El Araâr-Oued Belif location are classified as epithermal deposits type. The ore bodies are hosted by upper...     

Hydrochemical and stable isotopic investigation of groundwater quality and its sustainability for irrigation in the Hammamet-Nabeul basin,northeastern Tunisia

The major ion hydrochemistry, sodium absorption ratio (SAR), sodium percentage, and isotopic signatures of Hammamet-Nabeul groundwaters were used to identify the processes that control the mineralization, irrigation suitability, and origin of different water bodies. This investigation highlights that groundwater mineralization is mainly influenced by water-rock interaction and pollution by the return flow of irrigation water. The comparison of groundwater quality with irrigation suitability standards proves that most parts of groundwater are unacceptable for irrigation and this long-term practice may result in a significant increase of the salinity and alkalinity in the soils. Based on isotopic signatures, the shallow aquifer groundwater samples were classified into (i) waters with depleted δ¹⁸O and δ²H contents, highlighting recharge by modern precipitation, and (ii) waters with enriched stable isotope contents, reflecting the significance of recharge by contaminated water derived from the return flow of evaporated irrigation waters. The deep-aquifer groundwater samples were also classified into (i) waters with relatively enriched isotope contents derived from modern recharge and mixed with shallow-aquifer groundwater and (ii) waters with depleted stable isotope contents reflecting a paleoclimatic origin. Tritium data permit to identify three origins of recharge, i.e., contemporaneous, post-nuclear, and pre-nuclear. Carbon-14 activities demonstrate the existence of old paleoclimatic recharge related to the Holocene and Late Pleistocene humid periods.     

Modeling of soil penetration resistance using multiple linear regression (MLR)

In agricultural areas, the use of machinery leads to improved yields. Nevertheless, its inadequate implementation and excessive utilization can seriously affect the soil efficiency. In fact, latter can be generated by increasing the penetration resistance and subsequently, it results in the compaction phenomenon. This problem becomes considerable with the increasing report wheel/soil. The aim of this work was to evaluate the efficiency through the prediction of soil penetration resistance (Rp) using a statistical model based on moisture content, density, tractor weight, number of passes, and the wheel inflation pressure. Experimental works (211 measurements) were analyzed and the penetration resistance was modeled using multiple linear regressions (MLR). Besides, the developed model elucidates the variables affecting the accentuation of soil Rp and allows the investigation of equations for novel sampled soils. Our results showed that the parameters related to soil and tractors were significant to explain Rp. The adopted model in the MLR analysis emphasizes that the mechanical parameters of ground measurements are statistically significant in estimating and evaluating Rp. The statistical calculation of the R ² expresses 83% of the variance in Rp generated by the various parameters related to soil and tractor. In view of the importance of estimating the penetration resistance (Rp), the regression equation shows that the weight of the tractor and the number of passages contributed the most to the proposed model for the soil.     

Flow‐Through Stream Modeling with MODFLOW and MT3D: Certainties and Limitations

This paper aims to assess MODFLOW and MT3D capabilities for simulating the spread of contaminants from a river exhibiting an unusual relationship with an alluvial aquifer, with the groundwater head higher than the river head on one side and lower on the other (flow‐through stream). A series of simulation tests is conducted using a simple hypothetical model so as to characterize and quantify these limitations. Simulation results show that the expected contaminant spread could be achieved with a specific configuration composed of two sets of parameters: (1) modeled object parameters (hydraulic groundwater gradient, hydraulic conductivity values of aquifer and streambed), and (2) modeling parameters (vertical discretization of aquifer, horizontal refinement of stream modeled with River [RIV] package). The influence of these various parameters on simulation results is investigated, and potential complications and errors are identified. Contaminant spread from stream to aquifer is not always reproduced by MT3D due to the RIV package's inability to simulate lateral exchange fluxes between stream and aquifer. This paper identifies the need for a MODFLOW streamflow package allowing lateral stream‐aquifer interactions and streamflow routine calculations. Such developments could be of particular interest for modeling contaminated flow‐through streams.     

Neo-deterministic seismic hazard assessment in North Africa

North Africa is one of the most earthquake-prone areas of the Mediterranean. Many devastating earthquakes, some of them tsunami-triggering, inflicted heavy loss of life and considerable economic damage to the region. In order to mitigate the destructive impact of the earthquakes, the regional seismic hazard in North Africa is assessed using the neo-deterministic, multi-scenario methodology (NDSHA) based on the computation of synthetic seismograms, using the modal summation technique, at a regular grid of 0.2?×?0.2°. This is the first study aimed at producing NDSHA maps of North Africa including five countries: Morocco, Algeria, Tunisia, Libya, and Egypt. The key input data for the NDSHA algorithm are earthquake sources, seismotectonic zonation, and structural models. In the preparation of the input data, it has been really important to go beyond the national borders and to adopt a coherent strategy all over the area. Thanks to the collaborative efforts of the teams involved, it has been possible to properly merge the earthquake catalogues available for each country to define with homogeneous criteria the seismogenic zones, the characteristic focal mechanism associated with each of them, and the structural models used to model wave propagation from the sources to the sites. As a result, reliable seismic hazard maps are produced in terms of maximum displacement (D _max), maximum velocity (V _max), and design ground acceleration.     

组合压气机中尾迹与势流同频/异频干涉的叠加特性

为揭示多级压气机中上下游叶轮对中间叶片叠加气动影响特性,阐述不同叠加干涉情况下下游叶轮进气角度变化,采用数值方法模拟了一级轴流和一级离心组成的组合压气机非定常流场。详细讨论了上游动叶尾迹和下游动叶势流对中间导流叶栅段气流非定常流动的异频和同频叠加干涉特性,依据计算结果,直观地展示了静叶通道中两种干涉间相互激励和抑制作用的位置和时间,与数学公式的推导结果相互印证。研究结果表明:当上下游动叶对中间静叶段异频干涉时,干涉的激励、抑制区域的轴向位置随时间发生变化;当上下游动叶对中间静叶干涉频率相同时,干涉的相互激励、抑制区域的轴向位置不随时间发生变化,但干涉的激励、抑制区域的轴向位置受时序位置影响。另外,上游动叶尾迹与下游离心叶轮势流的不同叠加情况,决定着下游离心叶轮进口相对气流角的大小及波动幅值。      

Studies on water-in-oil products from crude oils and petroleum products

Water-in-oil mixtures such as emulsions, often form and complicate oil spill countermeasures. The formation of water-in-oil mixtures was studied using more than 300 crude oils and petroleum products. Water-in-oil types were characterized by resolution of water at 1 and 7 days, and some after 1 year. Rheology measurements were carried out at the same intervals. The objective of this laboratory study was to characterize the formed water-in-oil products and relate these properties to starting oil properties. Analysis of the starting oil properties of these water-in-oil types shows that the existence of each type relates to the starting oil viscosity and its asphaltene and resin contents. This confirms that water-in-oil emulsification is a result of physical stabilization by oil viscosity and chemical stabilization by asphaltenes and resins. This stabilization is illustrated using simple graphical techniques. Four water-in-oil types exist: stable, unstable, meso-stable and entrained. Each of these has distinct physical properties.