Engineering geomorphological characterisation of the Vajont Slide,Italy, and a new interpretation of the chronology and evolution of the landslide

Although the 1963 Vajont Slide in Italy has been extensively studied for over 50 years, its regional geological and geomorphological context has been neglected. In this paper, we use field observations and remote sensing data to elucidate the interaction between endogenic and exogenic processes that brought the north slope of Monte Toc to failure. We present the first detailed pre- and post-failure engineering geomorphology maps of the slide area. The maps delineate two main landslide blocks, several sub-blocks, compressional and extensional zones, and secondary failures in the deposit. The maps provide new insights into the kinematics, dynamics and evolution of the slide. Finally, we discuss the origin of Vajont Gorge and a prehistoric failure that occurred at the same location as the 1963 slide. We propose, as part of a newly developed multi-stage landscape evolution sequence, that the prehistoric failure was a deep-seated gravitational slope deformation (sackung) that initiated during deglaciation and continued to slowly move until the catastrophic failure in 1963. We argue that the gorge was created by these deep-seated slow movements.     

Holocene climate variability in Sicily from a discontinuous stalagmite record and the Mesolithic to Neolithic transition

Fabric and stable isotopic composition of a Holocene stalagmite (CR1) from a cave in northern Sicily record changes in paleorainfall in the early Holocene. High δ¹³C stable isotope values in the calcite deposited from ca. 8500 to ca. 7500 yr ago are interpreted as reflecting periods of high rainfall. The wet phase was interrupted by two periods of multi-century duration characterized by relatively cool and dry winters centered at ca. 8200 and ca. 7500 yr ago, highlighted by low δ¹³C and δ¹⁸O values. A high variability of δ¹³C values is recorded from ca. 7500 to ca. 6500 yr ago and indicates that the transition from a pluvial early Holocene to the present-day climate conditions was punctuated by decadal-scale periods of relatively dry winters. In northern Sicily, the traditional elements of the Neolithic appear at ca. 7700 yr ago. It is possible that changes in rainfall influenced the passage from hunter-gathering to farming and sheep-herding economies.     

Exploring the impact of diagenesis on (isotope) geochemical and microstructural alteration features in biogenic aragonite

For the Quaternary and Neogene, aragonitic biogenic and abiogenic carbonates are frequently exploited as archives of their environment. Conversely, pre‐Neogene aragonite is often diagenetically altered and calcite archives are studied instead. Nevertheless, the exact sequence of diagenetic processes and products is difficult to disclose from naturally altered material. Here, experiments were performed to understand biogenic aragonite alteration processes and products. Shell subsamples of the bivalve Arctica islandica were exposed to hydrothermal alteration. Thermal boundary conditions were set at 100°C, 175°C and 200°C. These comparably high temperatures were chosen to shorten experimental durations. Subsamples were exposed to different ¹⁸O‐depleted fluids for durations between two and twenty weeks. Alteration was documented using X‐ray diffraction, cathodoluminescence, fluorescence and scanning electron microscopy, as well as conventional and clumped isotope analyses. Experiments performed at 100°C show redistribution and darkening of organic matter, but lack evidence for diagenetic alteration, except in Δ₄₇ which show the effects of annealing processes. At 175°C, valves undergo significant aragonite to calcite transformation and neomorphism. The δ¹⁸O signature supports transformation via dissolution and reprecipitation, but isotopic exchange is limited by fluid migration through the subsamples. Individual growth increments in these subsamples exhibit bright orange luminescence. At 200°C, valves are fully transformed to calcite and exhibit purple‐blue luminescence with orange bands. The δ¹⁸O and Δ₄₇ signatures reveal exchange with the aqueous fluid, whereas δ¹³C remains unaltered in all experiments, indicating a carbonate‐buffered system. Clumped isotope temperatures in high‐temperature experiments show compositions in broad agreement with the measured temperature. Experimentally induced alteration patterns are comparable with individual features present in Pleistocene shells. This study represents a significant step towards sequential analysis of diagenetic features in biogenic aragonites and sheds light on reaction times and threshold limits. The limitations of a study restricted to a single test organism are acknowledged and call for refined follow‐up experiments.     

A least squares approach for efficient and reliable short-term versus long-term optimization

The uncertainties related to long-term forecasts of oil prices impose significant financial risk on ventures of oil production. To minimize risk, oil companies are inclined to maximize profit over short-term horizons ranging from months to a few years. In contrast, conventional production optimization maximizes long-term profits over horizons that span more than a decade. To address this challenge, the oil literature has introduced short-term versus long-term optimization. Ideally, this problem is solved by a posteriori multi-objective optimization methods that generate an approximation to the Pareto front of optimal short-term and long-term trade-offs. However, such methods rely on a large number of reservoir simulations and scale poorly with the number of objectives subject to optimization. Consequently, the large-scale nature of production optimization severely limits applications to real-life scenarios. More practical alternatives include ad hoc hierarchical switching schemes. As a drawback, such methods lack robustness due to unclear convergence properties and do not naturally generalize to cases of more than two objectives. Also, as this paper shows, the hierarchical formulation may skew the balance between the objectives, leaving an unfulfilled potential to increase profits. To promote efficient and reliable short-term versus long-term optimization, this paper introduces a natural way to characterize desirable Pareto points and proposes a novel least squares (LS) method. Unlike hierarchical approaches, the method is guaranteed to converge to a Pareto optimal point. Also, the LS method is designed to properly balance multiple objectives, independently of Pareto front’s shape. As such, the method poses a practical alternative to a posteriori methods in situations where the frontier is intractable to generate.     

Short chain ladderanes: Oxic biodegradation products of anammox lipids

Anammox, the microbial anaerobic oxidation of ammonium by nitrite to produce dinitrogen gas, has been recognized as a key process in both the marine and freshwater nitrogen cycles, and found to be a major sink for fixed inorganic nitrogen in the oceans. Ladderane lipids are unique anammox bacterial membrane lipids that have been used as biomarkers for anammox bacteria in recent and past environmental settings. However, the fate of ladderane lipids during diagenesis is as of yet unknown. In this study, we performed oxic degradation experiments (at 20-100 °C) with anammox bacterial biomass to simulate early diagenetic processes occurring in the water column and at the sediment-water interface. Abundances of C₁₈ and C₂₀ ladderane lipids decreased with increasing temperatures, testifying to their labile nature. The most abundant products formed were ladderane lipids with a shorter alkyl side chain (C₁₄ and C₁₆ ladderane fatty acids), which was unambiguously established using two-dimensional NMR techniques on an isolated C₁₄-[3]-ladderane fatty acid. The most pronounced production of these short-chain lipids was at 40 °C, suggesting that degradation of ladderane lipids was microbially mediated, likely through a β-oxidation pathway. An HPLC-MS/MS method was developed for the detection of these ladderane alteration products in environmental samples and positively tested on various sediments. This showed that the ladderanes formed during degradation experiments also naturally occur in the marine environment. Thus, short-chain ladderane lipids may complement the original longer-chain ladderane lipids as suitable biomarkers for the detection of anammox processes in past depositional environments.     

Doubtful Events Reported in Current Italian Earthquake Catalogues: The Medieval Earthquakes of Subiaco (Central Italy)

Within the framework of a study of the seismicity of the Aniene Valley (Central Italy), we analysed the medieval earthquakes of Subiaco (1216, 1227, 1299), the largest events reported for the area. Our main goal was to investigate some doubtful events reported in earthquake catalogues and, as such, currently utilised for seismic hazard estimates. A careful screening of the oldest available sources and their filiation pattern up to the present pointed out the uncertainty on the date and nature of these phenomena. A multidisciplinary approach based on the joint analysis of archaeological, geomorphologic and historical evidence allowed us to propose new interpretations concerning these events and their significance for the assessment of seismic hazard in the Aniene Valley. The main conclusion is that the dates of the 1216 and 1227 events are fairly unsupported. In particular, the 1216 earthquake could be dated back to between AD 1159 and 1181.     

Behavior of Gd-DTPA in simulated bank filtration

The behavior of Gd-DTPA during bank filtration was simulated in a 30 m column filled with Pleistocene sand and flushed by surface water from a lakeside in Berlin, Germany. The surface water is about a 1:1 mixture of river water and effluents from a sewage treatment plant. Throughout 34 days this water was continuously spiked with Gd-DTPA at a level of 60 μg/L. The broad plateau of the Gd-DTPA pulse declined by 15.4% within 34 days by transmetallation. Nine percentage of the total decline is caused by Y and rare earth elements; the remaining part is attributed to Cu²⁺ which is the most influential metal in surface water. All other metals also contributing to transmetallation are combined with Cu to Cu equivalents because only the rate constant of transmetallation of Cu²⁺ is known. The analytical results of the column effluents prove the pseudo-first-order kinetics of transmetallation based on reversible sorption of metals by pools in the column sediment and disprove biodegradation at noticeable levels. The mass ratio of water to tracer is <10¹⁰.     

Acoustic core logging in blast-damaged rock

Thill, R.E. and D' Andrea, D. V., 1975. Acoustic core logging in blast-damaged rock. Eng. Geol., 10: 13–36.The Bureau of Mines, in cooperation with the Duval Corp., conducted a blast-fragmentation experiment to determine the feasibility of preparing a porphyry copper-molybdenum deposit for in-situ leaching. The blast was designed with ten 9-inch-diameter blastholes to depths of 110 feet in an equilateral triangle configuration; spacings between blastholes were 15, 20, and 25 ft. One of the major problems in the experiment was in assessing blast damage. Acoustic core-logging equipment and methods were devised and used as one approach in solving this problem. Ultrasonic pulse travel-times were determined in four diametral directions at 2-ft intervals of depth to a final depth of 120 ft in three preblast and six postblast drill cores at the Duval test site. The acoustic logging program provided compressional wave travel-time at 0°, 45°, 90°, and 135° around the core circumference, maximum travel-time difference, mean compressional-wave velocity, and an anisotropy factor. Other acoustic parameters introduced in the analyses were stiffness modulus, seismic quality designation (SQD), and a compensated velocity to account for portions of the core that were nonrecoverable or too highly fractured to permit diametral travel-time measurements.The acoustic parameters all indicated the deterioration in structural quality from the preblast condition, in which the rock already was badly fractured and weathered, to the more highly fractured postblast condition. Because of the highly fragmented, poor structural condition of the rock after blasting, the rock was indicated to be suitable for in-situ leaching, at least at the 20- and 15-ft blasthole spacings, and even in some zones in the rock at the 25-ft blasthole spacing.     

Experimental study of the K2ZrSi3O9 (wadeite)–K2TiSi3O9 and K2(Zr,Ti)Si3O9–phlogopite systems at 2–3 GPa

Experiments ranging from 2 to 3 GPa and 800 to 1300 °C and at 0.15 GPa and 770 °C were performed to investigate the stability and mutual solubility of the K₂ZrSi₃O₉ (wadeite) and K₂TiSi₃O₉ cyclosilicates under upper mantle conditions. The K₂ZrSi₃O₉–K₂TiSi₃O₉ join exhibits complete miscibility in the P–T interval investigated. With increasing degree of melting the solid solution becomes progressively enriched in Zr, indicating that K₂ZrSi₃O₉ is the more refractory end member. At 2 GPa, in the more complex K₂ZrSi₃O₉–K₂TiSi₃O₉–K₂Mg₆Al₂Si₆O₂₀(OH)₄ system, the presence of phlogopite clearly limits the extent of solid solution of the cyclosilicate to more Zr-rich compositions [Zr/(Zr + Ti) > 0.85], comparable to wadeite found in nature, with TiO₂ partitioning strongly into the coexisting mica and/or liquid. However, at 1200 °C, with increasing pressure from 2 to 3 GPa, the partitioning behaviour of TiO₂ changes in favour of the cyclosilicate, with Zr/(Zr + Ti) of the K₂(Zr,Ti)Si₃O₉ phase decreasing from ∼0.9 to ∼0.6. The variation in the Ti content of the coexisting phlogopite is related to its degree of melting to forsterite and liquid, following the major substitution ^VITi+^VI□=2^VIMg. Received: 26 January 1999 / Accepted: 10 January 2000