The 1.80–1.74-Ga gabbro–anorthosite–rapakivi Korosten Pluton in the Ukrainian Shield: a 3-D geophysical reconstruction of deep structure

The deep structure of the gabbro–anorthosite–rapakivi granite (“AMCG-type”) Korosten Pluton (KP) in the northwestern Ukrainian Shield was studied by 3-D modelling of the gravity and magnetic fields together with previous seismic data. The KP occupies an area of ca. 12,500 km² and comprises several layered gabbro-anorthositic intrusions enveloped by large volumes of rapakivi-type granitoids. Between 1.80 and 1.74 Ga, the emplacement of mafic and associated granitoid melts took place in several pulses. The 3-D geophysical reconstruction included: (a) modelling of the density distribution in the crust using the observed Bouguer anomaly field constrained by seismic data on Moho depth, and (b) modelling of the magnetic anomaly field in order to outline rock domains of various magnetisation, size and shape in the upper and lower crust. The density modelling was referred to three depth levels of 0 to 5, 5 to 18, and 18 km to Moho, respectively. The 3-D reconstruction demonstrates close links between the subsurface geology of the KP and the structure of the lower crust. The existence of a non-magnetic body with anomalously high seismic velocity and density is documented. Most plausibly, it represents a gabbroic stock (a parent magma chamber) with a vertical extent of ca. 20 km, penetrating the entire lower crust. This stock has a half-cylindrical shape and a diameter of ca. 90 km. It appears to be connected with a crust–mantle transitional lens previously discovered by EUROBRIDGE seismic profiling. The position of the stock relative to the subsurface outlines of the KP is somewhat asymmetric. This may be due to a connection between the magmatism and sets of opposite-dipping faults initially developed during late Palaeoproterozoic collisional deformation in the Sarmatian crustal segment. Continuing movements and disturbances of the upper mantle and the lower crust during post-collisional tectonic events between 1.80 and 1.74 Ga may account for the long-lived, recurrent AMCG magmatism.     

The palaeoenvironmental and palaeohydrological evolution of Padul Peat Bog (Granada, Spain) over one million years, from elemental, isotopic and molecular organic geochemical proxies

The elemental (concentration of organic carbon, atomic H/C and C/N ratios), isotopic (δ¹³C values of organic matter) and molecular (predominant n-alkane chain length and carbon preference index (CPI)) organic components were measured for 600 samples taken from a 107-m long core from the Padul Basin (Andalusia, Spain). The record runs from the Lower Pleistocene (ca. 1 Ma B.P.) to the mid-Holocene (ca. 4.5 ka B.P.) with, in general, little diagenesis (removal of components). Two markedly different hydrogeological scenarios were interpreted: (1) From ca. 1 Ma to ca. 400 ka B.P. run-off recharge was significant and water depths were greater (lacustrine scenario). From ca. 400 to 4.5 ka B.P., the Padul Basin became a peat bog s.s. with the major water input coming from groundwater inflow. From ca. 400 to ca. 180 ka B.P. alternating episodes with either predominant grasses, trees or aquatic macrophytes which were linked to wet/dry phases, took place. An important deglaciation episode has been interpreted to occur between ca. 180 and 170 ka B.P. The global climatic changes occurring from ca. 170 to 25 ka B.P. were not recorded in the proxies, though they do show important variations linked to the Last Glacial Maximum and the beginning of the Holocene (ca. 25–10 ka B.P.): (2) Cold phases coexisting with dry periods produced the recession of forests and the development of grasses. After these periods, as both temperature and precipitation increased, forests expanded and the water level, linked to thaw, rose, especially at ca. 20 ka B.P. Few changes occurred during the Holocene, although there were short alternations between wet and dry episodes. Overall, the techniques applied proved to be excellent palaeoenvironmental proxies for studying the basin’s palaeoclimatological and palaeohydrological evolution.     

Sedimentology and palynology of the Calafate Formation (Maastrichtian), Austral Basin, Southern Patagonia, Argentina

The Calafate Formation crops out in south-western Santa Cruz Province, Argentina, and displays a stacking of asymmetrical coarsening–fining-upward cycles. These cycles are interpreted as the product of short-lived transgressive-regressive events in which the coarsening upward part represents sedimentary aggradation with a stable or decreasing sea level. Sedimentological and palynological analyses indicate nearshore marine conditions. Even though the existence of an estuary or incised valley cannot be determined, this is the most probable palaeogeographic model. Based on dinoflagellate cysts, the base of the section is considered to be not older than Maastrichtian. The presence of the oyster Ambigostrea clarae (Ihering) occurring together with the dinoflagellate cyst species Manumiella druggii (Stover) Bujak and Davies and Eisenackia circumtabulata Drugg in the middle part of the section indicates an age no older than late Maastrichtian. According to sedimentological data, deposits representing the Cretaceous–Palaeogene transition would have been eroded, which is confirmed by the presence of Grapnelispora loncochensis Papú. This megaspore is a consistent component of the Maastrichtian assemblages from Patagonia.     

Transformation of Residuals to Avoid Artifacts in Geostatistical Modelling with a Trend

Trend modelling is an important part of natural resource characterization. A common approach to account for a variable with a trend is to decompose it into a relatively smoothly varying trend and a more variable residual component. Then, the residuals are stochastically modelled independent of the trend. This decomposition can result in values outside the plausible range of variability, such as grades below zero or ratios that exceed 1.0. We transform the residuals conditional to the trend component to explicitly remove these complex features prior to geostatistical modelling. Back transformation of the modelled residual values allows the complex relations to be reproduced. A petroleum-related application shows the robustness of the proposed transformation. Furthermore, a mining application shows that when this conditional transformation is applied to the original variable, instead of the residual, simulated values are assured to be nonnegative.     

Effet du vieillissement des céramiques poreuses sur leur capacité à évaluer la concentration de pesticide en solution

The soil solution sampling by ceramic cups allows pesticide transfer monitoring in the soil during long times. The ageing of material involves a bias in the sampling results. In laboratory, the comparison of two types of ceramic suction cups, new and installed in situ during four years, shows a modification of the hydrodynamic properties and a possible evolution of the adsorption capacity of the matrix. The passage rate, as well qualitative as quantitative, is better for the old material. Recommendations about site management are finally exposed. To cite this article: N. Domange et al., C. R. Geoscience 336 (2004).     

Exhumation of high-pressure rocks of the Kokchetav massif: facts and models

The exhumation of ultrahigh-pressure (UHP) metamorphic units from depths more than 100-120 km is one of the most intriguing questions in modern petrology and geodynamics. We use the diamondiferous Kumdy-Kol domain in the Kokchetav Massif to show that exhumation models should take into consideration initially high uplift velocities (from 20 down to 6 cm/year) and the absence of the deformation of UHP assemblages. The high rate of exhumation are indicated by ion microprobe (SHRIMP) dating of zircons from diamondiferous rocks and supported by the low degree of nitrogen aggregation in metamorphic diamonds.Diamondiferous rocks in the Kumdy-Kol domain occur as steeply dipping (60°-80°) thin slices (few hundred metres) within granite-gneiss. Using geological, petrological and isotopic-geochemical data, we show that partial melting of diamondiferous metamorphic rocks occurred; a very important factor which has not been taken into account in previous models.Deformation of diamondiferous rocks at Kumdy-Kol is insignificant; diamond inclusions in garnet are often intergrown with mica crystals carrying no traces of deformation. All these facts could be explained by partial melting of metapelites and granitic rocks in the Kumdy-Kol domain. The presence of melt is responsible for an essential reduction of viscosity and a density difference (Δρ) between crustal rocks and mantle material and reduced friction between the upwelling crustal block, the subducting and overriding plates. Besides Δρ, the exhumation rate seems to depend on internal pressure in the subducting continental crustal block which can be regarded as a viscous layer between subducting continental lithosphere and surrounding mantle.We construct different models for the three stages of exhumation: a model similar to “corner flow” for the first superfast exhumation stage, an intermediate stage of extension (most important from structural point of view) and a very low rate of exhumation in final diapir+erosional uplift.     

Three-dimensional forward and backward modelling of diapirism: numerical approach and its applicability to the evolution of salt structures in the Pricaspian basin

Numerical studies of ductile deformations induced by salt movements have, until now, been restricted to two-dimensional (2D) modelling of diapirism. This paper suggests a numerical approach to model the evolution of three-dimensional (3D) salt structures toward increasing maturity. This approach is also used here to restore the evolution of salt structures through successive earlier stages. The numerical methodology is applied to study several model examples. We analyse a model of salt diapirs that develop from an initial random perturbation of the interface between salt and its overburden and restore the evolved salt diapirs to their initial stages. We show that the average restoration errors are less than 1%. An evolutionary model of a 2D salt wall loaded by a 2D pile of sediments predicts a decomposition of the salt wall into 3D diapiric structures when the overburden of salt is supplied by 3D synkinematic wedge of sediments. We model salt extrusion feeding a gravity current over the depositional surface and estimate an average rate of extrusion and horizontal velocity of salt spreading. Faulting of the overburden to salt overhangs initiates new secondary diapirs, and we analyse the growth of these secondary diapirs. We also study how lateral flow effects the evolution of salt diapirs. The shape of a salt diapir can be very different if the rate of horizontal flow is much greater than the initial rate of diapiric growth solely due to gravity. We discuss the applicability of the results of the models to the evolution of Late Permian salt structures in the Pricaspian basin (Russia and Kazakhstan). These structures are distinguishable into a variety of styles representing different stages of growth: salt pillows, diapirs, giant salt massifs, 2D diapiric walls and 3D stocks complicated by large overhangs. The different sizes, shapes and maturities of salt structures in different parts of the Pricaspian basin reflect areal differences in salt thickness and loading history. Our results suggest that the numerical methodology can be employed to analyse the evolution of all salt structures that have upbuilt through younger ductile overburdens.     

合理设计岩屑规程保证正常钻进条件——金刚石钻进技术专题之一

论述了正常钻进的条件，提出了合理岩屑规程是保证正常钻进的关键和设计钻头的主要依据之一，讨论了岩屑规程与金刚石钻头唇面工作状态、孔底表面粗糙度和岩屑粒度的关系，提出了相应的建议。