Geochemistry and Radioactive Potentiality of Um Naggat Apogranite, Central Eastern Desert, Egypt

Abstract: The northern part of Um Naggat granite massif (UNGM) has suffered extensive post-magmatic metasomatic reworking which results into the development of (Zr, Hf, Nb, Ta, U, Th, F)– and albite-enriched and greisenized apogranite body (UNAP) of 600 m thick, and more than 3 km in the strike length.
Albitization produced an enrichment in Zr (av. 2384 ppm), Hf (61), Nb (419), and U (43). The Th/U ratio ranges between 1. 33 and 1. 90. Extreme albitization (i. e. the albitite rock) is characterized by sharp decrease in the rare metals contents. However, extreme greisenization (i. e. endogreisen bodies) is characterized by a considerable enrichment in Zr (av. 5464 ppm), Hf (143), Nb (2329), Ta (152), U (66) and Th (178). The Th/U ratio ranges between 1. 57 and 3. 60. In contrast to extreme greisenization, it seems that extreme albitization does not apparently change the fluid pH and therefore poor amounts of rare metals are localized in the albitites.
It is suggested that the presence of Na⁺, H⁺ and F^- in the ore fluids was essential to stablize complexes of Zr, Hf, Nb, Ta, U, Th, and HREE during extraction and transportation. In contrast, contemporaneous decrease of temperature and increasing pH due to decreasing pressure are considered the essential factors for localization of disseminated mineralization of Zr and Nb in the apical parts of the UNAP. The enhanced uranium content in the alteration facies of UNAP coupled with the absence of significant uranium mineralization may indicate the metalliferous rather than mineralized nature for the UNAP. The high uranium contents are stabilized in refractory accessory minerals. However, with repect to Zr and Nb, the UNAP especially the albitized and greisen facies, can be categorized as a mineralized productive granite.     

Estimating the near surface amplification factor to minimize earthquake damage: a case study at West Wadi Hagoul area, Egypt

The damage caused by earthquake occurrences in different localities all over the world necessitates the evaluation of the underground and/or sub-soil structure for strategic projects. The case study is the proposed area for a new factory construction that lies 3 km west of Suez Cement factory, in the area between Kottamiya and Ain Sokhna. The shallow seismic refraction survey was carried out through 10 major lines (grid lines), comprising 30 seismic profiles. The microtremor measurements were done at 25 locations at the grid intersection points. The obtained compressional (P) and horizontal shear (SH) wave velocities, with the horizontal to vertical (H/V) spectral ratios, are used to deduce the subsurface structures, to evaluate the elastic and dynamic properties and the transfer function at both the surface and bedrock. The results illustrate that there is a good correlation between the fundamental frequencies deduced through the theoretical transfer function and the H/V spectral ratio. The maximum value of ground motion amplification factor of the study area is 3.3 at a corresponding frequency of 7.8 Hz.     

Seismic microzonation of Marsa Alam, Egypt using inversion HVSR of microtremor observations

An attempt was made to estimate seismic microzonation in Marsa Alam city, Egypt based on the analysis of seismic microtremor observations. Observations were carried out at 140 sites in the study region. Analysis and processing of microtremor were divided into two steps; the first one is to measure the horizontal-to-vertical spectral ratios (HVSR) for each site and picked predominant frequency and its amplitude for each site. The second step is to measure the average shear wave velocity in the upper 30 m (Vs30) of subsoil using inversion of HVSR technique. The results show well matching of theoretical HVSR and observed HVSR for body waves in all sites. The Vs30 parameter was used to classify subsoil into classes of soil properties converted to the slandered European soil code (Eurocode-8 (2002)) as follows; Vs < 180(class D), 180 ≤ Vs < 360 (class C), 360 ≤ Vs < 800 (class B) and Vs ≥ 800 m/s (class A). Our study exhibits that most of Marsa Alam city were covered by B and C classes with small portions of class D close to the shoreline and class A at the northeastern part of the region. The developed classification soil map of the study area was correlated with the distribution of the predominant frequency in view of the surface geology and given a good matching. The results of this study will be useful for planning the Marsa Alam region to be the future tourist dream for Egypt. The method used in assessment of seismic microzonation in Marsa Alam city could be the fast and inexpensive technique to measure the Vs30 based on the HVSR of microtremor and would be applied in many other areas in Egypt.     

Delineation of Near-Surface Structure in the Southern Part of 15th of May City, Cairo, Egypt Using Geological, Geophysical and Geotechnical Techniques

The integration of geological, geophysical, and geotechnical interpretation at the southern part of 15th of May City, have been used to evaluate the subsurface stratigraphy, especially the clay layer which may cause serious danger to construction. Those techniques have been used to delineate the subsurface structures as normal faults, which play a critical role on the stability of buildings. Geological setting of the area has been evaluated through the construction of a geological map from different geological sections and samples obtained from more than 30 observation points. Geophysical tools such as vertical electrical soundings (12 VESs), 2-D dipole–dipole array (7 sections), P-wave shallow seismic refraction (31 profiles) and multiple channel analysis of surface waves (31 MASW profiles) have been carried out to image the subsurface situation. Geotechnical evaluation using 26 boreholes, samples, laboratory tests and geotechnical parameters has been done at the area of interest. The geological setting demonstrates that the city had been constructed on the second and third members of Qurn Formation (Upper Eocene) composed of argillaceous limestone, marl and shale. Two normal faults are passing through the area were observed. The resistivity (VES and dipole–dipole) and seismic (P-waves and MASW) results reflect the presence of the two normal faults cross the study area, affecting the obtained section of marl, clayey marl and limestone layers. The geotechnical information indicate the presence of the normal faults and the existence of clay layer with swelling ability reaching 140%, which may cause cracks in the upper layers and/or subsidence.     

A new occurrence of garnetiferous skarn rocks in Saudi Arabia: a case study from Bahrah area, Jeddah–Makkah Al Mukaramah highway

Metacarbonate rocks (including marble and skarn deposits) at Bahrah area are confined to a Precambrian island-arc suite made up mostly of massive basalts and volcaniclastics aligned in a NE-trending belt. The marbles are either pure (almost made up of calcite) or contain considerable amounts of tremolite, actinolite, epidote, and diopside. Garnet-bearing rocks at Bahrah area are classified into garnetiferous marble and skarn calc-silicate assemblages that are described here for the first time. The calc-silicates become more abundant when the marble becomes interbedded with foliated metabasalt. Such contact is delineated by an epidote zone of variable thickness. Microscopically, the skarns are enriched in Ca-bearing minerals such as grossular garnet, epidote, titanite, diopside, and augitic salite. There are evidence that calc-silicate skarns were formed due to a thermal effect of a concealed underground shallow granitic intrusion. The basaltic rocks furnished Mg²⁺, Fe²⁺, Ti⁴⁺, and Al³⁺ that were first concentrated in the epidote zone. This was followed by pervasive replacement of epidote by large idiomorphic garnet (grossularite) that attains up to ～1.5 cm wide. It is evident that diopside is earlier than garnet with no replacement fabrics between the two minerals. Two types of titanite (sphene) can be distinguished: The first is secondary in the metabasalt host where titanite develops after titanomagnetite during regional metamorphism (i.e., metamorphic). On the other hand, the second type of titanite is found in the garnet-bearing calc-silicate skarn where it is typically euhedral with no link to any opaque phase and it is believed to be formed due to the event of superimposed thermal metamorphism (i.e., metasomatic). There are several evidence of the thermal metamorphic effect such as distinct granoblastic and annealing textures and K-metasomatism and formation of phlogopite at the expense of tremolite in the marble, in addition to poikiloblastic hornblende in the metabasalt host with distinct recrystallization. Also, there are some evidence of shearing such as brecciation along microshear planes, microfolding, introduction of fine euhedral pyrite, and presence of injected silica postdating crystallization of garnet in the calc-silicates.     

Optimisation of deep mixing technique by artificial neural network based on laboratory and field experiments

ABSTRACT

Ground improvement techniques are inevitable for weak soils that cannot endure the design load imposed by superstructures. Deep mixing technique (DMT) as one of these methods is promising and effective when a deep soil layer with low bearing capacity is encountered. Such deposits are quite common in the South-west of Iran where the studied site is located. In order to validate the influence of DMT on the enhancement of strength, both in-situ and laboratory tests were conducted. Afterwards, a parametric study was carried out to investigate the influence of key factors including cement content, water–cement ratio, curing time and plasticity index (PI) on the performance of DMT. In summary, a total of 192 different conditions were examined in this study by using two methods of 3D plotting and artificial neural networks (ANNs) as the optimisation tool. Results proved the importance of water–cement ratio as a key parameter in DMT. Based on the trained networks, ANN was revealed to give satisfactory predictions on the strength of an improved soil with different admixture conditions. More important, the optimisation made by ANN could determine the specific values for selected key admixture factors to reach a desired strength level with the coefficient of determination higher than 0.85.     

Mapping Structurally Controlled Alterations Sparked by Hydrothermal Activity in the Fatira–Abu Zawal Area, Eastern Desert, Egypt

The Eastern Desert of Egypt suffered a protracted period of deformation triggered by cratonization of the new juvenile crust known as the Arabian Nubian Shield (ANS), which has been proposed for potential gold discoveries associated with the corresponding tectonic event. The Fatira area, on the border of Egypt''s Northern and Central Eastern Deserts, is covered with metavolcanic rocks twisted by a dextral relocation of the Fatira Shear Zone (FSZ) relative to the Barud magmatic body. The recent study evaluated many deformed post-orogenic granitic intrusions and felsite dikes associated with promising mineralization localities, notably orogenic gold deposits. The combination of various field observations and remote sensing data, followed by the analysis of aeromagnetic enhanced maps, allowed the differentiation of distinct lithologies, structural features, and hydrothermal alterations in the study area. Additionally, the integrated results obtained from the different interpretation techniques are utilized to identify and confirm the previously supposed mineralized localities in the Fatira and Abu Zawal areas and predict other matched localities. The final ASTER, Sentinel 2 hydrothermal alteration, and orientation entropy heat maps demonstrate the association between these mineralized regions and major structures related to the FSZ late stage of deformation rather than other structures studied throughout the area of interest.