Assessment of geomorphological bank evolution of the alluvial threshold rivers based on entropy concept parameters

The complex stream bank profiles in alluvial channels and rivers that are formed after reaching equilibrium has been a popular topic of research for many geomorphologists and river engineers. The entropy theory has recently been successfully applied to this problem. However, the existing methods restrict the further application of the entropy parameter to determine the cross-section slope of the river banks. To solve this limitation, we introduce a novel approach in the extraction of the equation based on the calculation of the entropy parameter (λ) and the transverse slope of the bank profile at threshold channel conditions. The effects of different hydraulic and geometric parameters are evaluated on a variation of the entropy parameter. Sensitivity analysis on the parameters affecting the entropy parameter shows that the most effective parameter on the λ-slope multiplier is the maximum slope of the bank profile and the dimensionless lateral distance of the river banks.     

Using magnetic susceptibility measurements to differentiate soil drainage classes in central Iran

Studia Geophysica et Geodaetica - We examine the potential of magnetic susceptibility measurements to discriminate different soil drainage classes in the Gandoman region, central Iran. Four soil...     

Assessing the influence of watershed characteristics on soil erosion susceptibility of Jhelum basin in Kashmir Himalayas

Soil erosion, a serious environmental problem, is a global challenge. Once a portion of a fertile soil is lost, it is very difficult to replace it, and this leads to decrease in crop production, damage to drainage networks, and siltation of dams and reservoirs. Human practices like intensive agriculture, overgrazing, and deforestation have intensified the rate of soil erosion all over the world. The Jhelum basin which forms the north-western part of the complex mountain system Himalayas is not only highly vulnerable to natural hazards like earthquakes, landslides, and floods but is also highly susceptible to soil erosion. There is an immediate need to device strategies to reduce adverse impacts of soil erosion and to conserve natural resources like soil, water, and forests by means of proper watershed management programs in the Himalayan region. The present study is carried out for eight upper watersheds of Jhelum basin, an area which are facing serious issues like boulder extraction, deforestation, and unplanned urbanization. The present work demonstrates the use of morphometry, land use, and slope coupled with the multicriteria analytical (MCA) framework to estimate the soil erosion susceptibility of these watersheds using Remote Sensing and Geographical Information System techniques. The present study revealed that out of eight upper watersheds, Arapal, Lidder, and Bringi fall in high priority and need immediate attention and measures to reduce soil erosion in the area. Sandran, Rembiara, and Romshii fall in medium priority. Kuthar and Vishav fall in the low-priority category and are least susceptible to soil erosion.     

Geochemistry and origin of Dehoo manganese deposit,south Zahedan,southeastern Iran

Dehoo manganese deposit is located 52 km to the south of Zahedan in Sistan and Baluchestan Province, southeastern Iran. This deposit that lies in the central part of the Iranian Flysch Zone is lenticular in shape and lies above the micritic limestone-radiolarite cherts of the upper Cretaceous ophiolite unit. It is hosted within the reddish to brown radiolarite cherts and in places interlinks with them, so that the radiolarite chert packages play a key role for Mn mineralization in the region. Investigated ore-paragenetic successions and the geochemical characteristics of the Dehoo deposit were studied by means of major oxide, trace, and rare earth element (REE) contents that provide information as to the mineral origin. Strong positive correlations were found between major oxides and trace elements (Al₂O₃-TiO₂, r = 0.95; TiO₂-MgO, r = 0.94; Fe₂O₃-Al₂O₃, r = 0.90; MgO-Al₂O₃, r = 0.84; MgO-Fe₂O₃, r = 0.88; Fe₂O₃-TiO₂, r = 0.91; Fe₂O₃-K₂O, r = 0.74; Al₂O₃-K₂O, r = 0.69; Al₂O₃-V, r = 0.72; TiO₂-V, r = 0.73, and MgO-V, r = 0.69) that testify to the contribution of mafic terrigenous detrital material to the deposit. Chondrite-normalized REE patterns of all ore samples are characterized by negative Ce (0.06–0.15, average 0.10) and slightly positive Eu (0.29–0.45, average 0.36) anomalies. Based on ratios of Mn/Fe (average 56.23), Co/Ni (average 0.33), Co/Zn (average 0.38), U/Th (average 3.40), La/Ce (average 1.45), La_n/Nd_n (average 2.16), Dy_n/Yb_n (average 0.33), and light REE/heavy REE (average 8.40; LREE > HREE), as well as Ba (average 920 ppm) and total REE contents (average 6.96 ppm) negative Ce and positive Eu anomalies, Dehoo could be considered a predominantly submarine hydrothermal Mn deposit complemented by terrigenous detrital mafic material.     

The effect of different meteorological parameters on the temporal variations of reference evapotranspiration

Temporal changes of meteorological variables can affect reference evapotranspiration (ET₀). The goal of the present research is to analyze the changes of ET₀ and identify the impact of effective meteorological parameters to the changes of ET₀. For this purpose, daily meteorological data recorded in 30 synoptic stations of Iran during 1960–2014 were used. The annual and seasonal values of ET₀ were calculated by the recorded data. To calculate ET₀, FAO56 Penman–Monteith method (standard method) was used. The annual and seasonal trends of ET₀ and its eight effective parameters were analyzed. Then the contributions of effective parameters changes on ET₀ were determined. To analyze ET₀ trend at annual and seasonal scales, two common methods, Spearman’s Rho and Mann–Kendall tests, were used. The R ² = 0.99 showed that the results of the mentioned methods were similar and on the basis of T-statistic <0.057, their difference was not significant (95% confidence level). Therefore, only one method’s results (Spearman’s Rho) were reported. On the basis of Spearman’s Rho results, the annual and seasonal values of ET₀ had negative trend in most of arid and semi-arid stations while the trend of this parameter was positive in humid and very humid stations. At annual and seasonal scales, decreasing in wind speed (W), temperature (T), sunshine hours (n), minimum temperature (TN), dew point temperature (TD), maximum temperature (TX), saturation vapor pressure deficit (SVPD) and solar radiation (RS) was observed in 58, 54, 39, 43, 56, 65, 65 and 37% studied stations, respectively. In many scales, the results showed that TX and W were the most effective meteorological variables on ET₀ changes and then SVPD was located in second step in arid and semi-arid stations. In humid and very humid stations, W was the first effective parameter at all scales, except autumn.     

Sequence signal processing of 2012 Ahar–Varzaghan earthquake (<Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> 6.4) of NW Iran

Before starting seismic cycle of Ahar–Varzaghan 2012 event, a partial gap in the form of a pre-seismic calm sequence (seismicity rate, r = 0.46 event/year, b = 1.4) with duration of 303 days spatially has dominated over the entire seismogenic area. From April 17, 2012, to May 31, 2012, r significantly increased to 2.16, indicating strong foreshock sequence, and b value changed to 1.9, remarkably. In the last two months before the mainshock, foreshocks have partially migrated toward the earthquake fault (with a decrease in size, b = 2.0). Significantly, high rate of seismicity and low V _P /V _S (1.64) in the foreshocks sequence and also very high seismicity rate (17.3) and high V _P /V _S (1.76) in the aftershocks sequence make substantial differences between the seismic cycle and the background seismicity. Moreover, a significant E–W migration of the microseismicity was confirmed in the study area.     

Multi-criteria decision-making analysis in selecting suitable plotting positions for IDF curves of storm events

Selecting suitable distributions for rainfall data is usually subjective and complex since it requires decision-makers to consider results from various measures of goodness-of-fit indices. In this study, the VIKOR method in multi-criteria decision-making analysis is modified to select the most suitable plotting positions to represent extreme storm intensities in order to build the intensity–duration–frequency (IDF) curves of storm events. This is done by considering the rankings provided by all goodness-of-fit indices used to obtain a compromise solution. Nine plotting positions are considered: Weibull (W), Adamowski (A), Gringorten (G), Hazen (H) and Gumbel (EV I) and two known plotting positions for generalized extreme value (GEV) distribution using Pearson’s skewness and another two using L-skewness. The IDF curves obtained are compared to a reference IDF curves which was found using the GEV distribution. The mean and median for three goodness-of-fit indices, the coefficient of variation of root mean square error, CV_RMSE, the mean percentage of difference, Δ, and the coefficient of determination, R ², are taken as the criteria for selection process. The results show that six plotting positions, A, H, W, G and the two plotting positions with L-skewness, are equally superior compared to the other three plotting positions.     

Landfill site selection using combination of fuzzy logic and multi-attribute decision-making approach

During the last decades, growth of urbanization and industrialization led to an increase in solid waste generation. Landfilling is the most prevalent ultimate disposal method for the municipal solid wastes in developing countries. The rapid municipal solid waste generation in Markazi province (central part of Iran) causes the need for precision in finding a suitable landfill site selection. In the present study, 12 factors (environmental and socioeconomic factors) have been applied to select the landfill site in Markazi province, Iran. The different methods including the analytic network process (ANP) combined with fuzzy linguistic quantifier, ordered weighted average (OWA), and weighted linear combination (WLC) approach in geographic information system was applied to find an appropriate landfill site. The OWA operator function permits the evaluation of the wide spectrum of consequences (with different scenario) obtained from different management strategies. Results revealed that integration of fuzzy logic, ANP, and OWA provides flexible and better ideas compared to the Boolean logic and WLC to select a suitable landfill site.     

Denoising and improving the quality of seismic data using combination of DBM filter and FX deconvolution

Seismic data denoising, random noise attenuation (RNA) and spike-like noise suppression, is a main consideration for improving the quality of records. RNA could increase signal to noise ratio (S/N) to avoid misinterpretation of seismic data. In this research, a novel method is created by using the combination of frequency-offset deconvolution (FXD) and decision-based median (DBM) filter for RNA from seismic data. The method is applied in two main phases; FXD is focused to remove the Gaussian noise and DBM filter is focused to attenuate the impulsive noise and spikes. To implement and verify the method, three types of data are used: two synthetic models (a model with linear events and a model with hyperbolic events) and an observed seismic section. The ability of the proposed method (FXD-DBM) in comparison of applying each in seismic RNA application is proven. The noise level is reduced obviously, and hence, the S/N of all examined seismic records is increased considerably after denoising by the combination of FX deconvolution and DBM filter. About the real seismic section, suppressing random noise and spikes show up improving the seismic reflector continuity and hence enhancing the interpretability of data. Moreover, some masked events by random noise are clarified in different parts of data after denoising using the planned method.