遥感估算降水在西藏高原中的应用研究

采用遥感估算降水模型RFE 2.0(Rainfall Estimation Algorithm Version 2)模拟了2009年西藏高原的区域降水,并结合该地区气象站降水观测资料分别从日、月、年尺度上评价了该模型在西藏高原降水估算中的适用性,最后通过系数校正分析了2009年8月西藏高原降水量和年降水量的分布格局。结果表明,RFE2.0模型日降水量模拟值与观测值的相关系数在0.40以上的测站占46%,变化趋势较一致,但在日降水量较小时(接近零)模拟结果不稳定,在降水量较大时(>15mm)模拟结果一般会偏低;月平均降水量模拟结果与观测结果的相关系数在0.80以上的测站占62%,模拟结果较好地反映了观测结果的变化趋势,但个别月份的模拟结果会出现偏差。雨季降水量的模拟结果明显好于干季,为进一步提高模拟精度,确定雨季校正系数为1.133,干季校正系数为1.265;年尺度上降水量的模拟值与观测值的相关系数为0.368(P=0.026)。整体来看,遥感估算降水模型(RFE2.0)模拟的西藏高原降水结果较好,可为西藏高原降水模拟提供借鉴和参考。     

基于LDM的乡镇雨量数据分中心的设计与实现

针对河南省乡镇雨量数据库服务器和雨量查询WEB服务器在有降水过程时经常会因访问压力过大而出现网站瘫痪的情况,根据乡镇雨量数据时效性高的特点,鉴于LDM系统在数据传输过程中的时效性和完整性,建立了基于LDM系统的乡镇雨量数据分中心.乡镇雨量数据分中心由雨量入库软件、乡镇雨量数据库和雨量查询网站构成.使用结果表明,雨量入库软件能及时将获取的雨量数据文件入库;查询(历史或实时)雨量时,访问乡镇雨量中心的速度要快于访问省局乡镇雨量网站的速度.     

卤水提锂的萃取体系概述

介绍了国内外萃取法在含锂溶液,尤其在卤水中提取锂的部分研究进展情况,重点对各种萃取体系的机理和特点进行了说明,并对今后我国盐湖卤水萃取法提锂研究的方向进行了总结。     

无水硝酸镁制备过程中的水解特性

在槽式太阳能热发电领域,硝酸镁基熔盐逐渐引起关注。通过六水硝酸镁煅烧法制备无水硝酸镁,采用拉曼、DSC与XRD表征脱水产物,系统研究了环境压力、脱水温度与时间对六水硝酸镁脱水和水解的影响。结果表明,六水硝酸镁在煅烧过程中水解为碱式硝酸镁Mg_3(OH)_4(NO_3)_2,在水溶液中进一步分解为Mg(OH)_2。随着煅烧温度和时间的增加,脱水产物中的含水量逐渐减少,同时水解产物Mg_3(OH)_4(NO_3)_2含量逐渐增加。真空环境下煅烧,可显著降低硝酸镁的水解反应。六水硝酸镁在真空环境下230℃煅烧1.5 h,所制备的无水硝酸镁中水解产物含量为3.63%。制备的硝酸镁可进一步用于硝酸镁基熔盐的研究。     

用于盐湖提锂的聚酰胺复合纳滤膜制备及其性能研究

纳滤膜技术以其环境友好、装置集成度高和智能化控制等优势,在卤水锂资源绿色开发领域具有良好的应用前景。实验通过添加聚乙烯醇对纳滤膜功能层进行改性,考察了聚乙烯醇相对含量对纳滤膜性能的影响。结果表明,聚乙烯醇参与界面聚合反应,纳滤膜功能层O/N比增加,聚乙烯醇分子链间氢键作用降低纳滤膜表面粗糙度。羟基官能团的引入有效改善纳滤膜材料亲水效果,膜面羧基密度随聚乙烯醇相对添加量的增加逐渐增加。聚乙烯醇改性纳滤膜截留效果优异,纳滤膜对镁离子的截留率高于95%,锂离子截留率低于-44%,不可逆通量衰减指数低于15%。聚乙烯醇改性纳滤膜材料具有较好的镁锂分离选择效果及抗污染能力,为用于盐湖卤水镁锂分离国产化纳滤膜材料的开发提供新思路。     

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.     

黔东地区金矿床类型及其基本特征

本文对黔东地区金矿进行了矿床类型划分,并综述了各类型的基本特征。该区中-低温热液作用形成的金矿均属产于沉积岩建造中的金矿床,与岩浆岩在成因上没有直接联系。其中,天柱-锦屏-黎平地区、梵净山地区及从江地区金矿为变碎屑岩中脉型及蚀变岩型金矿床。三都-丹寨地区金矿为细碎屑岩-碳酸盐岩中微细浸染型金矿床,天柱-锦屏-黎平地区及梵净山地区的变碎屑岩中脉型金矿床（点）暴露表生环境后可形成冲积型砂金矿床。     

裂缝性碳酸盐岩油藏裂缝网络的识别方法研究——以胜利油区F潜山油藏应用为例

提出了针对碳酸盐岩裂缝型储层的裂缝识别和类型判别方法:在对常规测井曲线进行小波多尺度分析的基础上,通过求取剩余曲线变化率,以消除岩性对测井曲线的影响,突出裂缝信号,提高常规测井对裂缝的分辨率;以岩心描述和成像测井所识别的裂缝类型为样本,以多测井参数为变量,运用主成分分析和Fisher判别等方法,建立裂缝类型的判别模型。此方法应用于胜利油区F潜山碳酸盐岩储层的裂缝类型判别,效果较好。     

中国大陆地壳运动与强震关系研究

利用GPS观测结果研究了中国大陆当前地壳运动的空间分布及其所揭示的大区域构造变形背景与趋势;讨论了区域水平运动、应变率场分布与强震地点的关系;通过对昆仑山口西Ms8.1等地震区域水平运动与形变的分析,研究了强震过程的区域形变场变化的主要特征;提出了识别孕震形变场以进行中长期强震地点预测的思路和途径。