Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.     

Silicon limitation on primary production and its destiny in Jiaozhou Bay, China——Ⅳ：Study on cross-bay transect from estuary to ocean

The authors analyzed the data collected in the Ecological Station Jiaozhou Bay from May 1991 to November 1994, including 12 seasonal investigations, to determine the characteristics, dynamic cycles and variation trends of the silicate in the bay. The results indicated that the rivers around Jiaozhou Bay provided abundant supply of silicate to the bay. The silicate concentration there depended on river flow variation. The horizontal variation of silicate concentration on the transect showed that the silicate concentration decreased with distance from shorelines. The vertical variation of it showed that silicate sank and deposited on the sea bottom by phytoplankton uptake and death, and zooplankton excretion. In this way, silicon would endlessly be transferred from terrestrial sources to the sea bottom. The silicon took up by phytoplankton and by other biogeochemical processes led to insufficient silicon supply for phytoplankton growth. In this paper, a 2D dynamic model of river flow versus silicate concentration was established by which silicate concentrations of 0.028–0.062 μmol/L in seawater was yielded by inputting certain seasonal unit river flows (m³/s), or in other words, the silicate supply rate; and when the unit river flow was set to zero, meaning no river input, the silicate concentrations were between 0.05–0.69 μmol/L in the bay. In terms of the silicate supply rate, Jiaozhou Bay was divided into three parts. The division shows a given river flow could generate several different silicon levels in corresponding regions, so as to the silicon-limitation levels to the phytoplankton in these regions. Another dynamic model of river flow versus primary production was set up by which the phytoplankton primary production of 5.21–15.55 (mgC/m²·d)/(m³/s) were obtained in our case at unit river flow values via silicate concentration or primary production conversion rate. Similarly, the values of primary production of 121.98–195.33 (mgC/m²·d) were achieved at zero unit river flow condition. A primary production conversion rate reflects the sensitivity to silicon depletion so as to different phytoplankton primary production and silicon requirements by different phytoplankton assemblages in different marine areas. In addition, the authors differentiated two equations (Eqs. 1 and 2) in the models to obtain the river flow variation that determines the silicate concentration variation, and in turn, the variation of primary production. These results proved further that nutrient silicon is a limiting factor for phytoplankton growth. This study was funded by NSFC (No. 40036010), and the Director's Fund of the Beihai Sea Monitoring Center, the State Oceanic Administration.     

基于Chandra的活动星系核观测

活动星系核（AGN）是宇宙中最奇特的天体之一。它是真正意义上的全波天体，其中X射线波段的发射功率占到全波段功率的50％左右。AGN的X射线辐射研究涉及天体物理中的最基本问题，例如能量产生、辐射机制和宇宙论等，而Chandra X射线卫星的高分辨率图像和光谱对这一研究有着重要作用。以Chandra卫星的部分观测结果为例，简要介绍了几类不同类型AGN的X射线辐射研究进展：（1）宽吸收线类星体APM08279＋5255（z=3．91）的X射线谱分析，以及高红移类星体的观测概况；（2）Seyfert星系NGC 4151延展X射线发射问题的解决，及NGC 1068X射线辐射与光学波段的高激发态发射线（[OⅢ]λ5007）有很强相关性的发现；（3）6个BLLac天体样本的X射线环境分析；（4）射电星系X射线喷流的观测等。     

冻融循环对塑料土工格栅拉伸性能的影响

在-25～ 25 ℃环境温度条件下, 采用水中冻融和空气中冻融两种方式, 经过50次冻融循环后, 在15 ℃、 0 ℃、 -10 ℃、 -20 ℃和-35 ℃工况下对土工格栅试样进行了拉伸性能的试验研究, 获得了聚乙烯塑料土工格栅的极限承载力、最大延伸率、 不同延伸率对应的应力值等数据. 试验结果表明, 聚乙烯塑料土工格栅在低温时抗拉性能明显提高, 从 15 ℃降至-35 ℃时, 5%延伸率对应的抗拉强度提高107%, 极限承载力提高19%. 同时, 聚乙烯塑料土工格栅极限延伸率随温度降低呈线形关系降低, 从 15 ℃降至-35 ℃时, 极限延伸率降低80%.     

等温微量热法在土壤微生物研究方面的进展

土壤微生物是陆地生态系统中分解者亚系统的主要组成部分, 参与了包括有机质降解、营养转化、 植物生长的促进或抑制以及各种土壤物理过程在内的一系列反应活动. 土壤微生物则是土壤质量重要的生物指标, 可以用来监控土壤质量的变化. 等温微量热法是一种简便、快速地测量微生物活性的方法, 在土壤微生物代谢热效应的研究领域中广泛应用. 就等温微量热法在土壤微生物活性中的研究进展进行综述: 等温微量热法的简介, 微量热方法与传统方法的比较, 等温微量热法在各种外界环境和土壤条件影响下的土壤微生物活性研究中的应用, 并对等温微量热法在土壤微生物和其它方面的研究进行了展望.     

西安地铁二号线沿线地裂缝成因分析

西安地铁二号线沿线地裂缝主要包括西安地裂缝、长安地裂缝和次级裂缝f0。西安地裂缝总体为北东走向,活动方式为南倾南降,分布在临潼—长安断裂带(FN)上盘。长安地裂缝目前活动性较弱,处于隐伏状态。本文简要介绍了沿线地裂缝的基本情况,并在地裂缝勘察成果的基础上分析归纳得出,西安地裂缝的形成与深部构造活动有关,现今的超常活动与过量抽汲深层承压水导致地面不均匀沉降有关。长安地裂缝成因有两种:一种是构造成因,一种是重力成因。     

双斑东方鲀人工繁殖及育苗技术

本文报道了福建省水产研究所 2 0 0 1年双斑东方人工繁殖及育苗过程与结果 .在春季当海水水温达到 1 6℃以上时 ,用DOM、LRH A3或HCG进行催产 ,混和或单一使用 ,剂量视亲鱼性腺成熟度而定 .受精卵在水温 1 8.0～ 2 2 .4℃、盐度 2 2 .1～2 8.6条件下 ,经 1 1 7～ 1 56h孵化 .用 2 0 5万尾开口仔鱼培育出平均全长为 3 7mm ,平均体重为 1 .3 g的鱼苗 52 .3 5万尾 ,成活率 2 5.5%.此外 ,对亲鱼的暂养、催产、受精卵的孵化、仔鱼的前期培育和后期培育等关键环节进行了探讨 .     

海洋石油管道单点提升分析

基于管道微单元体平衡建立了海管单点提升的非线性力学模型的控制微分方程组 ,使用变弧长的无量纲代换将动边界问题化为固定边界的两点边值问题 ,利用Maple环境下编制的两点边值问题的打靶法程序得到了该问题在各个提升阶段的数值解答和在单点提升过程中管道的极限弯矩约为 0 .71q1 3(EI) 2 3。     

正压浅海湍流运动的雷诺应力封闭模型

根据湍流封闭理论,建立一种适用于正压浅海湍流运动的雷诺应力封闭模型(RSM),以代替目前三维浅海动力学模型中普遍采用的湍粘性系数的传统假设。通过直接建立并模化f—平面上正压海洋的雷诺应力传输方程,分别得到的微分形式和代数形式的RSM方程组。并讨论了进行数值计算所需要的边界条件。利用该模型可以进一步研究浅海潮流、风暴潮流及风海流等浅海流动的三维结构和湍流特性。