Textural and mineralogical evidence for a Cadomian tectonothermal event in the eastern Mediterranean (Sandıklı-Afyon area, western Taurides, Turkey)

In the Sandıklı-Afyon area, the very low-grade metamorphic Sandıklı Basement Complex with clastic sediments and Late Neoproterozoic felsic igneous rocks are unconformably overlain by a cover succession with red continental clastic rocks, tholeiitic basalts and siliciclastic rocks with Early Cambrian trace fossils. Illite crystallinity studies reveal that both the basement and cover units were metamorphosed at high anchizonal to epizonal conditions ( 300 °C). Textural data together with the detailed evaluation of the P–T–b₀ grid, however, indicate that this thermal event has multiple phases. The first tectonothermal event was realized at pressures of  4.2 kb on the basis of b₀-data and resulted in development of blastomylonites. This is supported by the presence of dynamo-metamorphosed pebbles within the basal conglomerates of the Lower Paleozoic cover series. The second event is post-Ordovician–pre-Jurassic in age, occurred at lower pressures  3.2 kb and produced a weakly developed cleavage in the siliciclastic rocks of the cover. The mineralogical/textural data across the basement-cover boundary therefore indicate the removal of an entire metamorphic zone and thus a metamorphic hiatus.

These data suggest that the Taurides were affected by a Late Neoproterozoic event as part of the peri-Gondwana during the Cadomian orogeny.     

A Fully Depleted pn-Junction CCD for Infrared-, UV- and X- ray detection

This paper describes the performance of the Fully Depleted pn-junction CCD (pn-CCD) system, developed for ESA's XMM-satellite mission for soft x-ray imaging and spectroscopy in the single photon counting mode in the 100 eV to 10 keV photon range. The 58 mm x 60 mm large pn-CCD array, designed and fabricated at the Semiconductor Lab (Halbleiterlabor) of the Max-Planck-Institut, uses pn-junctions for registers and as backside structure. This concept naturally enables full depletion of the detector volume independent of the silicon wafer's resistivity and thickness, and as such make it an efficient detector for the x-ray region and the infrared. For high detection efficiency in the soft x-ray region and UV, an ultrathin pn-CCD backside deadlayer has been realized. Each pn-CCD-channel is equipped with its own on-chip JFET amplifier which, in combination with the CAMEX-amplifier and multiplexing chip, facilitates parallel readout and fast data rate: the cooled pn-CCD system can be read out at a data rate up to 3 MHz with an electronic noise floor of ENC < 5 e-.     

Boundary condition control of fluvial obstacle mark formation – framework from a geoscientific perspective

Obstacle marks are sedimentary bedforms, typically composed of an upstream local scour hole and a downstream sediment accumulation in the vicinity of an obstruction that is exposed to a current. However, specific morphologies are variable in fluvial, coastal and submarine environments. Although obstacle marks and the phenomenon of local scouring are subject to different scientific disciplines, the objectives of investigations are rather incoherent and no systematic framework for analysing and evaluating boundary condition control exists yet, especially concerning limited knowledge of the cause and effect relationship of obstacle mark formation at instream boulders or vegetation elements in variable environmental conditions. Thus, a parameter framework is developed which identifies a spectrum of extrinsic and intrinsic boundary conditions that control the major process dynamics of obstacle mark formation. The framework is composed of dimensionless control parameters that are separated by a hierarchical order regarding their significance for obstacle mark formation. Primary control parameters determine the geometrical scale of flow field at the obstacle, and therefore control the potential maximum size of the obstacle. Secondary control parameters affect the dynamics of the flow field in geometrical scale and limit the potential maximum size of the emerging sedimentary structure if thresholds are crossed. The framework is supposed to be a foundation for subsequent quantification and determination of thresholds by systematic laboratory studies. To elucidate this, flume-based research is presented, evaluating the influence of different flow levels at boulder-like obstacles of different shapes. The results show that obstacle mark dimensions were maximized at shallow flow depths compared to obstacle dimensions, while deep flows at submerged boulder-like obstructions caused considerably smaller obstacle marks. In interdependency with a rounded and more streamlined obstacle shape, deep flows even cause a deviation of morphology if the flow depth above an obstacle exceeds 1.6 times the obstacle's dimensions. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Role of tectonic-sedimentary melange and Permian–Triassic cover units,central southern Turkey in Tethyan continental margin evolution

Melanges play a key role in the interpretation of orogenic belts, including those that have experienced deformation and metamorphism during continental collision. This is exemplified by a Palaeozoic tectonic-sedimentary melange (part of the Konya complex) that is exposed beneath a regionally metamorphosed carbonate platform near the city of Konya in central Anatolia. The Konya complex as a whole comprises three units: a dismembered, latest Silurian–Early Carboniferous carbonate platform, a Carboniferous melange made up of sedimentary and igneous blocks in a sedimentary matrix (also known as the Hal?c? Group or S?zma Group), and an overlying Volcanic-sedimentary Unit (earliest Permian?). The Palaeozoic carbonates accumulated on a subsiding carbonate platform that bordered the northern margin of Gondwana, perhaps as an off-margin unit. The matrix of the melange was mainly deposited as turbidites, debris flows and background terrigenous muds. Petrographic evidence shows that the clastic sediments were mostly derived from granitic and psammitic/pelitic metamorphic rocks, typical of upper continental crust. Both extension- and contraction-related origins of the melange can be considered. However, we interpret the melange as a Carboniferous subduction complex that formed along the northern margin of Gondwana, related to partial closure of Palaeotethys. Blocks and slices of Upper Palaeozoic radiolarian chert, basic igneous rocks and shallow-water carbonates were accreted and locally reworked by gravity processes. Large (up to km-sized) blocks and slices of shallow-water limestone were emplaced in response to collision of the Palaeozoic Carbonate Platform with the subduction zone. The overlying Volcanic-sedimentary Unit (earliest Permian?) comprises alkaline lava flows, interbedded with volcaniclastic debris flows and turbidites, volcanogenic shales and tuff. The complex as a whole is overlain by shallow-water, mixed carbonate–siliciclastic sediments of mainly Late Permian age that accumulated on a regional-scale shelf adjacent to Gondwana. Successions pass transitionally into Lower Triassic rift-related shallow-water carbonates and terrigenous sandstones in the southwest of the area. In contrast, Triassic sediments in the southeast overlie the melange unconformably and pass upwards from non-marine clastic sediments into shallow-marine calcareous sediments of Mid-Triassic age, marking the base of a regional Mesozoic carbonate platform. During the latest Cretaceous–Early Cenozoic the entire assemblage subducted northwards and underwent high pressure/low temperature metamorphism and polyphase folding as a part of the regional Anatolide unit.     

Light variation of LX persei between eclipses

Two-colour photoelectric observations of LX Per carried out at Ege University Observatory in 1981 and 1982 observing seasons are presented. The light curve of the system has a wave-like distortion which migrates towards the decreasing orbital phase. The period of the retrograde migration of the wave-like distortion has been determined as 475 days. The amplitude of the wave appears to change with time periodically.     

Photoelectric photometry of AR Lac in 1982

In this paper we present the observations of AR Lac, which were obtained in 1982. The variations in the light curves, occurred in the time interval as short as two months, indicated that the system was very active in 1982 like in 1979. The times of the minima obtained in this study indicate that the orbital period of the system continues to decrease. The decrease in the period was recalculated using all the times of minima obtained photoelectrically between 1961 and 1982 and found to be 17.0±1.4 s century^?1.     

Updated UBV Light-Curve and Period Analysis of Eclipsing Binary HS Herculis

UBV light-curves of the eclipsing binary HS Herculis, obtained in 2002–2003 observational seasons, were analysed with Wilson-Devinney computer code. New absolute dimensions of the system were calculated using the results of the light-curve analysis. Period variation of the system was also investigated. Several new times of minima have been secured for this problematic system. An apsidal motion with a period of 80.7 years was confirmed and a third body in a pretty eccentric orbit (e ₃ = 0.90 ± 0.08) with a period of 85.4 years was found. The corresponding internal structure constants of the binary system, log k ₂, and the mass of the third body were derived.     

The Inference of Geo-Mechanical Properties of Soft Rocks and their Degradation from Needle Penetration Tests

Needle penetration tests (NPTs) are used for inferring the uniaxial compressive strength of soft rocks, particularly in tunneling through squeezing rocks and foundations on weathered rocks in Japan. The device measures the applied load and the penetration depth of its needle. The ratio of applied load to penetration depth was originally called the needle penetration index (NPI). In this study, this device has been used to infer the geo-mechanical properties of soft rocks from Japan, Turkey, Indonesia, and Egypt. Various equations are presented to infer the geo-mechanical properties in terms of the NPI and compared with the experimental results. The possibility of evaluating the anisotropy of geo-mechanical properties is shown. Furthermore, the characterization of geo-mechanical properties of fault/fracture and slip (shear) surfaces is explained. Some additional equations are given to consider the degradation of geo-mechanical properties as a function of water content, weathering state, and number of cycles of freezing–thawing. Furthermore, the possibility of evaluating the time-dependency characteristics of soft rocks by needle penetration testing is discussed through experiments. It is shown that the effects of water content, weathering state, and number of cycles of freezing–thawing and time-dependency can be evaluated using the NPT technique.     

Impact of the 2010 tsunami on an endangered insular soil–plant system

Natural catastrophes could damage island biodiversity and ecosystems, and their effects could become devastating if combined with human disturbances. In this study, we determined the effects of the tsunami occurred in Robinson Crusoe Island (Chile) on 27 February 2010 on an endangered soil–plant system. Using data of endemic Cabbage Trees (Dendroseris litoralis Skottsb.) and soil attributes taken before and after the 2010 event, we developed thematic maps to assess the changes in population size and soil substrate of Cabbage Trees caused by the tsunami. We determined that from 153 pre-tsunami (2009) standing Cabbage Trees, only 66 (43 %) survived in 2011, mostly in elevations above 25 m a.s.l. Before the tsunami, 86 (56 %) of Cabbage Trees were established in humus-rich soil sites whereas after the tsunami, this number declined to 53 (35 %). These results represent the first report of a severe population decline after a tsunami and indicate that tsunamis are an important source of species extinction in small oceanic islands not only by reducing the population size but also by reducing the quality of sites for plant growth.