Monitoring of heat transmission from buildings into geological environment and evaluation of soil deformation consequences in foundation engineering

In engineering geology a number of factors affecting foundation conditions are taken into consideration during engineering-geological investigations. This article deals with the factor of heat sourced from a structure (brick kiln) as a restrictive factor in foundation engineering in clay soils and introduces a documentation of soil deformation observations as an impact of the heat transmission into the geological environment. It was carried out in Southern Moravia in the Czech Republic, where the dominant foundation soils are Neogeneous clays where differential settlements of a tunnel kiln structure occurred as a result of ignoring the boundary conditions of temperature changes in the soil environment. The brick kilns caused heterogeneous spatial changes in the subsoil temperatures. This consequently resulted in differential settlements due to temperature changes originating from the kilns. The differential settlements reached as much as 150 mm. The major objective of the article is to highlight the importance of the heat transmission from buildings into the geological environment as a factor which should be considered in engineering geology and its application in planning. A new procedure for reducing or elimination of ground movements sourced from underlying clayey soils depending on the heat changes was also suggested in this context.     

Evolution in sea ice from 1978 to 2012

In this paper, the intra-annual and interannual variability of the sea ice is analysed over the period 1979–2012 from the data and images facilitated by the “National Snow and Ice dates Center”. These data are related to the annual average temperature. The annual average of the marine ice surface area (1979–2012) is very similar in both poles, although its temporary evolution is opposed in both hemispheres. In the Arctic Ocean there is an abrupt reduction of the surface area of the ice during this period. As opposed to it, the marine seas surrounding the Antarctic show an increase of the extension of the ice, especially in the last 15 years, with a maximum value in 2012. With respect to the total of the marine ice over the period 1979–2012, there is an overall deficit balance, because the reduction of the Arctic ice is greater than the increase of the Antarctic ice.     

3D alluvial aquifer reconstruction in polluted areas by means of GPR (Sabiñánigo,N Spain)

Assumptions of simple geometries for alluvial deposits (related to main rivers) can preclude determination of complexities that are revealed as fundamental controls in underground flow. Although subhorizontal contacts between alluvial and substratum materials are expected, previous sedimentary or erosional processes can result in irregular geometries, only accessible through detailed analysis. The studied case presents the 3D reconstruction of a Quaternary terrace in the proximities of Sabiñánigo (Southern Pyrenees, Northeastern Spain), lying on homogeneous Eocene marls. The studied area is located in an industrialized area supporting strongly pollutant chemical industry (chlorinated pesticides) for the past 50 years. The objective of the study was to constrain the groundwater pathway along the area to subsequently analyze leakage of chemicals to the water table. In order to reveal preferred flow paths, a detailed characterization of the internal structure of the alluvial deposits (0.5–13 m thick) and their relations with the Tertiary substratum was carried out by means of ground penetrating radar (GPR, 50 and 100 MHz antennas). The obtained models permit identifying several topographic highs in the alluvial/substratum contact, determining preferred pathways in water flow, favoring particular conditions associated with low levels of the water table. The presented results support the interest of application of GPR surveys in order to characterize the groundwater pathways in expected homogeneous areas and their importance in order to establish the contaminant surveillance network.     

GIS application for regional assessment of seismically induced slope failures in the Sierra Nevada Range,South Spain,along the Padul Fault

Complete rupture of the Padul Fault represents one of the largest plausible earthquakes in the Sierra Nevada Range, one of the most seismically active regions of Spain. We performed a regional assessment of earthquake-triggered slope instabilities in the western part of the range to determine the most likely types of failures from such an earthquake in the region and suggest where such failures have a higher likelihood of occurring. These results are broadly useful for management of regional life-lines and future development. First, a slope-instability inventory of the Sierra Nevada was produced to identify the most common instability types. Subsequently, the Newmark’s sliding rigid-block methodology, implemented in a geographic information system, was used to obtain the distribution of Newmark displacements in the area considering a M _w 6.6 earthquake on the Padul Fault. The Newmark displacements were then compared to the distribution of the inventoried slope instabilities to identify the areas where seismicity could reactivate old slope instabilities or generate new ones, and to identify the involved landslide typology. The most likely seismically induced slope instabilities in the Sierra Nevada are rock falls and rock slides. These types of instabilities could be triggered by Newmark displacements of 2 cm or less.     

A software solution for point counting. Petrographic thin section analysis as a case study

In the field of geology, as in many other fields, a common problem is the analysis of 2D sections. An example of this is the petrographic study of rock samples, i.e., the quantification of its mineral components and the percentages of each phase present in it. Conventionally, this quantification has been determined by point counting performed on thin sections. Although point counting is very time consuming, it is of common use in several domains including geology, biology, medicine, and materials sciences, among others. Point counting in thin sections is normally conducted through mechanical or electromechanical devices attached to a microscope; such devices are very expensive, offer limited functionality, and are very time consuming. In this contribution, we introduce an interactive visualization application called Rock.AR that reduces the amount of time required to apply this technique and simplify its work flow. It provides visual tools like distortion techniques, overview + detail, and statistics to assist the technique. A comparison between this application and similar tools through users' experiences is provided. We compare the time it takes to complete a session of point counting and the tools' usability.     

Origin and significance of poikilitic and mosaic peridotite xenoliths in the western Pannonian Basin: geochemical and petrological evidences

Peridotite xenoliths erupted by alkali basaltic volcanoes in the western Pannonian Basin can be divided into two fundamentally contrasting groups. Geochemical characteristics of the abundant protogranular, porphyroclastic and equigranular nodules suggest that these samples originate from an old consolidated and moderately depleted lithospheric mantle domain. In contrast, the geochemical features of the worldwide rare, but in the Pannonian Basin relatively abundant, poikilitic xenoliths attest to a more complex evolution. It has been argued that the origin of the peculiar texture and chemistry may be intimately linked to melt/rock reactions at successively decreasing liquid volumes in a porous melt flow system. The most likely site where such reactions can take place is the asthenosphere–lithosphere boundary. In this context, poikilitic xenoliths may provide petrological and geochemical evidence for reactions between magmatic liquids issued from the uprising asthenosphere and the solid mantle rocks of the lithosphere. These reactions are important agents of the thermal erosion of the lithosphere; thus, they could have considerably contributed to the thinning of the lithosphere in the Pannonian region. We suggest that in the Pannonian Basin, there could be a strong relation between the unusual abundance of poikilitic mantle xenoliths and the strongly eroded lithosphere.     

Significance of ancient sulfide PGE and Re–Os signatures in the mantle beneath Calatrava,Central Spain

Spinel lherzolite and wehrlite xenoliths from the Cenozoic Calatrava volcanic field carry the geochemical imprint of metasomatic agents that have affected the subcontinental lithospheric mantle beneath Central Iberia. Some xenoliths (mainly wehrlites) were enriched in REE, Sr, P, and CO₂ by silicic-carbonate-rich metasomatic melts/fluids, while others record the effects of subduction-related hydrous silicate fluids that have precipitated amphibole and induced high Ti/Eu in primary clinopyroxene. The petrographic observations and geochemical data suggest that interstitial glass in the xenoliths represent the quenched products of Si-rich melts that infiltrated the mantle peridotite shortly before the entrainment of the xenoliths in the host magmas that erupted ca 2 million years ago. During their infiltration, the metasomatic melts reacted with peridotite, resulting in silica enrichment, while remobilizing grains of iron-rich monosulfide solid solution (Fe-rich Mss) initially enclosed in, or intergranular to, primary olivine and pyroxenes. In situ laser ablation inductively coupled plasma-mass spectrometry analysis of single sulfide grains reveals that the Fe-rich Mss in glass shows platinum-group element (PGE) patterns and ¹⁸⁷Os/¹⁸⁸Os compositions identical to the Fe-rich Mss occurring as inclusions in, or at grain boundaries of primary silicates. Moreover, independent of its microstructural position, Fe-rich Mss exhibits PGE and ¹⁸⁷Os/¹⁸⁸Os signatures typical of Mss either residual after partial melting or crystallized directly from sulfide melts. Our findings reveal that young metasomatic melt(s)/fluid(s) may carry remobilized sulfides with PGE and Os-isotopic signatures identical to those of texturally older sulfides in the peridotite xenolith. These sulfides thus still provide useful information about the timing and nature of older magmatic events in the subcontinental mantle.     

The development of the pinnacles (Lena pillars) along Middle Lena (Sakha Republic,Siberia, Russia)

The study deals with the Lena Pillars (Sakha Republic, Russia, Siberia). The Lena Pillars are pinnacle features which are characteristic on karsts. The importance of these features is that they are extremely large and occur on very large areas. Their occurrence is interesting because they do not appear on tundra karst. We investigated the veneers of cliffs, the fracture density of the building rock, the distribution and dispersion of the fracture directions, direction distribution and dispersion of the giant grikes between the pillars, the layer thickness of the building rock, the size and dispersion of debris. We distinguished pillar types, and then we classified the features on the area of the pillars from a morphogenetical point of view. According to investigations and morphological analyses, the pillars developed from palaeokarsts. During the former karstification grikes and caverns developed close to the surface. These features coalesced into each other. The giant grikes of great size became filled and the pillars were covered. After the cut of the Lena River these features were revealed and became exhumed. Now the pillars are destroyed and continue developing by frost weathering.     

Archean to Recent aeolian sand systems and their sedimentary record: Current understanding and future prospects

The sedimentary record of aeolian sand systems extends from the Archean to the Quaternary, yet current understanding of aeolian sedimentary processes and product remains limited. Most preserved aeolian successions represent inland sand‐sea or dunefield (erg) deposits, whereas coastal systems are primarily known from the Cenozoic. The complexity of aeolian sedimentary processes and facies variability are under‐represented and excessively simplified in current facies models, which are not sufficiently refined to reliably account for the complexity inherent in bedform morphology and migratory behaviour, and therefore cannot be used to consistently account for and predict the nature of the preserved sedimentary record in terms of formative processes. Archean and Neoproterozoic aeolian successions remain poorly constrained. Palaeozoic ergs developed and accumulated in relation to the palaeogeographical location of land masses and desert belts. During the Triassic, widespread desert conditions prevailed across much of Europe. During the Jurassic, extensive ergs developed in North America and gave rise to anomalously thick aeolian successions. Cretaceous aeolian successions are widespread in South America, Africa, Asia, and locally in Europe (Spain) and the USA. Several Eocene to Pliocene successions represent the direct precursors to the present‐day systems. Quaternary systems include major sand seas (ergs) in low‐lattitude and mid‐latitude arid regions, Pleistocene carbonate and Holocene–Modern siliciclastic coastal systems. The sedimentary record of most modern aeolian systems remains largely unknown. The majority of palaeoenvironmental reconstructions of aeolian systems envisage transverse dunes, whereas successions representing linear and star dunes remain under‐recognized. Research questions that remain to be answered include: (i) what factors control the preservation potential of different types of aeolian bedforms and what are the characteristics of the deposits of different bedform types that can be used for effective reconstruction of original bedform morphology; (ii) what specific set of controlling conditions allow for sustained bedform climb versus episodic sequence accumulation and preservation; (iii) can sophisticated four‐dimensional models be developed for complex patterns of spatial and temporal transition between different mechanisms of accumulation and preservation; and (iv) is it reasonable to assume that the deposits of preserved aeolian successions necessarily represent an unbiased record of the conditions that prevailed during episodes of Earth history when large‐scale aeolian systems were active, or has the evidence to support the existence of other major desert basins been lost for many periods throughout Earth history?     

Coastal vulnerability to wave storms of Sele littoral plain (southern Italy)

This paper presents a new method for coastal vulnerability assessment (CVA), which relies upon three indicators: run-up distance (as a measurement of coastal inundation), beach retreat (as a measurement of potential erosion), and beach erosion rate (obtained through the shoreline positions in different periods). The coastal vulnerability analysis of Sele Coastal Plain to storm impacts is examined along a number of beach profiles realized between 2008 and 2009. This particular study area has been selected due to its low-lying topography and high erosion propensity. Results are given in terms of an impact index, performed by combining the response due to coastal inundation, storm erosion, and beach erosion rate. This analysis is implemented on the basis of morphosedimentary characteristics of the beach, wave climate evaluation, and examination of multitemporal aerial photographs and topographic maps. The analysis of the final results evidences different coastal responses as a function of the beach width and slope, which in turn depend on the local anthropization level. The comparison of this method with a Coastal Vulnerability Index method evidences the better attitude of CVA index to take into account the different beach features to explain the experienced damages in specific stretches of the coastline considered.