Static Analysis of Collision Strength of Offshore Platform

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Argo-认识和预测气候变化的全球海洋观测计划

1　全球海洋观测网 (Argo)为了解全球气候的变化 ,海洋学界正在做一项雄心勃勃的事业 ,即设计并部署一个全球海洋观测系统 ,以便对海洋从季节到十年间的变化作前所未有的长期跟踪观测。这项计划的实施 ,将使人类对气候的认识和预测向前迈出一大步。全球海洋观测系统的现场支柱就是 Argo剖面浮标网 ,将为人类提供一个全球海洋次表层数据库。Argo剖面浮标观测网将由 3 0 0 0个自动仪器组成 (图 1 ) ,每个浮标每隔 1 0天发送一组取自 2 0 0 0 m到海面的温度和盐度剖面资料 (图 2、3 )。在全球大洋内每隔大约 3个经纬度布设一个浮标 ,其数据通…     

东太平洋赤道海域茎柔鱼小型群体资源分布及其渔场环境特征

茎柔鱼(Dosidicus gigas)是我国远洋渔业的重要捕捞对象。当前针对茎柔鱼渔场分布及其与环境关系的研究多集中于秘鲁海域,针对赤道海域茎柔鱼特定种群小型群体资源分布及其渔场环境特征研究较少。根据2019年12月至2020年2月茎柔鱼生物学数据,2019年12月至2020年4月生产和环境数据,运用胴长-体重关系拟合、地统计插值、广义可加模型(GAM)探究其资源分布及渔场环境状况。结果表明：东太平洋赤道海域茎柔鱼胴长范围为136~407 mm,体重范围为117~1557 g；2019年12月至2020年4月各月渔获量呈先增加后减小趋势,2月渔获量最高；CPUE曲线除2月增加外,总体呈下降趋势；渔场集中分布于0°~3°S、105°W~114°W海域,不同月份渔场重心经向变化明显；渔场最适SST范围是24.5~25.5 °C,最适Chl-a范围是0.16~0.20 mg/m3,月份是影响茎柔鱼CPUE的主要因子。研究表明：该海域茎柔鱼渔获主要为小型群体；小型群体生长发育期(2–3月)对渔场分布有重要影响,生长发育期前茎柔鱼集群度高,生长发育期后逐渐分散活动；单一影响因子与茎柔鱼CPUE相关性不显著,综合考虑其他环境因素及其交互影响是今后的研究方向。     

Underice Operation of SJT-5 ROV

- The authors have used a low-cost ROV of observation type for underice surveying of the Nen-Jiang Cross-river oil pipe line in the Da Qing oil field. The operation method, process and the safety measures for severe cold areas are presented. The fruitful tries and experience may be useful to ROV operators in severe cold areas.     

黄骅电厂取水河段取水特性的数模与物模研究

本文采用数值模拟与物模试验相结合的研究方法，详细地研究了黄骅电厂一、二、三期工程的取水特性。结果表明，现有河道只能满足电厂一期工程的取水需求；若将现有河道进行适当开挖，可以满足电厂三期取水需要。     

松辽盆地西部张裂缝预测的应力场方法

以松辽盆地地质资料为基础，介绍了应力场和张裂缝预测的计算方法。通过了各种岩性的张破裂概率隶属函数，预测松辽盆地酉部张裂缝区的分布。据此，为今后的油气勘探提出了几点认识和建议。     

环胶州湾公路海上段汽车尾气的环境影响

对类比路段进行连续模拟试验,进行现场调查,给出汽车尾气主要污染物的排污强度,预测了汽车尾气中CO、C_nH_m和NO_x的扩散范围。     

花鲈幼鱼个体代谢与体重关系的初步研究

实验室条件下测定花鲈 ( L ateolabrax japonicus C & V)的代谢率 ,温度为 ( 2 5.2± 0 .5)℃ ,鱼体湿重范围 :4 .64～ 52 .2 8g(平均体重 17.81g± 0 .33g)。饥饿鱼的正常代谢相关于体重的关系式 :Rr=15.37W0 .74 4。( r=0 .934 )。摄食代谢与摄食量呈线性正相关关系 ,摄食代谢水平为正常代谢的 1.8～ 2 .4倍。