2000年4月29日内乡ML4.7级地震前潢川地电异常变化

2000年4月29日11时54分，河南省南阳市内乡县马山口镇与镇平县寺山乡之间发生一次ML4.7级地震。地震前3天，潢山台视电阻率ρs异常较为明显。分析了此次异常与内乡ML4.7级地震的关系，认为此次异常很有可能是内乡ML4.7级地震的短临前兆异常。当观测台站与震源位于同一构造带时，即便离震中较远，地电阻率对地震异常反映仍较灵敏，且与构造带同一走向的测向尤为明显。     

湖南印支期过铝质花岗岩的形成: 岩浆底侵与地壳加厚热效应的数值模拟

在合理构建华南印支期地质-物理模型的基础上, 利用FLAC软件, 模拟了该区印支期过铝质富钾花岗岩形成与基性岩浆底侵, 及陆壳变形叠置加厚两种动力学背景的可能联系. 模拟结果表明, 220 Ma±的基性岩浆底侵能导致地壳含水矿物相岩石的深熔, 但除非印支期存在大规模基性岩浆的底侵作用, 否则其热效应持续时间和热效应波及范围难以形成具大岩基规模的湖南印支期花岗岩. 在陆壳叠置加厚模型中, 地壳的叠置加厚可导致中下地壳界面温度升高到700℃以上, 引起片麻质岩石熔融, 当加厚因子达1.3, 白云母矿物脱水熔融产生的熔体达到熔体流动临界比例(≥20%), 从而形成花岗岩基; 结合印支期挤压逆冲推覆构造和同期基性火山岩极少出露的地质事实, 认为陆壳变形加厚可能是湖南印支期构造岩浆作用形成的主导因素.     

2-D crustal structure of Changbaishan-Tianchi volcanic region determined by seismic traveltime inversion

IntroductionTrial-and-error forward modeling of wide-angle seismic reflection/refraction traveltimes for 2-D velocity structure is extremely time-consuming, even for experienced data interpreters. For wide-angle seismic reflection/refraction experiments that consist of numerous shots along a single line, it is quite difficult through repeated trial-and-error forward modeling to construct a 2-D model that fits the data within acceptable limits (Cerveny, et al, 1977; ZHANG, et al, 200 . In ad…     

隔震及超高层建筑的地震反应观测

2001年5月24日和6月20日分别发生了宜良4.2级和呈南3.6级两次地震，架设在云南省抗震培训中心隔震大楼和昆明佳华广场的结构强震观测台阵记录了这两栋建筑物对这两次地震反应。本介绍了获取的记录，并分析了两栋建筑物的地震反应情况。     

小波分析在声发射资料处理中的初步应用

针对声发射数据分析的一些难点，把最近20年发展起来的小波技术引入声发射资料处理中，分析证明结果可靠。它在本中的应用有：（1）提取有效信息。小波强大分解（细化0能力可用来从高口音中找出有效记录，分解合成时可以去掉不理想的通道，使声发射数据更加“规则化”，有望实现到时自动判读。（2）对相互叠加的事件进行有效分离。结合全波记录，可使事件尽可能少丢失，提高声发射数量统计及b值计算等的精度。（3）使成份复杂的声发射波形数据分离成具有单一特征的波，但分解后的波究竟属于P波还是S波，甚至面波，尚难确定。     

湖北牛山湖高体鳑鮍的年龄、生长与繁殖

图 3　卵粒大小的频数分布 (ａ)具成熟卵细胞 (ｂ)无成熟卵细胞Ｆｉｇ 3ＦｒｅｑｕｅｎｃｙｄｉｓｔｒｉｂｕｔｉｏｎｏｆｅｇｇｓｉｚｅｏｆＲｈｏｄｅｕｓｏｃｅｌｌａｔｕｓ(ａ)ｗｉｔｈｓｏｍｅｍａｔｕｒｅｅｇｇｓ ,(ｂ)ｗｉｔｈｏｕｔｍａｔｕｒｅｄｅｇｇｓ图 4繁殖力 (Ｆ ,ｅｇｇｓ)与体重 (Ｗ ,ｇ)及全长 (ＴＬ ,ｍｍ )的关系Ｆｉｇ 4Ｒｅｌａｔｉｏｎｓｈｉｐｂｅｔｗｅｅｎｆｅｃｕｎｄｉｔｙ (Ｆ ,ｅｇｇｓ)ａｎｄｂｏｄｙｗｅｉｇｈｔ (Ｗ ,ｇ)ｏｒｔｏｔａｌｌｅｎｇｔｈ (ＴＬ ,ｍｍ)湖北牛山湖高体鳑鮍的年龄、生长与繁殖@…     

Horizontal and vertical components of earthquake ground motions at liquefiable sites

Field observations on ground motions from recent earthquakes imply that current knowledge is limited with regard to relating vertical and horizontal motions at liquefiable sites. This paper describes a study with the purpose of clarifying this emerging issue to some extent. A series of numerical analyses is carried out on a liquefiable soil deposit with a verified, fully coupled, nonlinear procedure. It is shown that the transformation of vertical motions in the deposit differs considerably from the transformation of horizontal motions. Both the amplitude and frequency content of the horizontal motions are strongly dependent on the shaking level or the associated nonlinear soil behavior. The transfer function for vertical motions is however likely to be independent of the intensity of input motions; no reduction in the amplitude occurs even in the case of strong shaking. The results are shown to be in consistence with the laboratory observations on shaking table tests and recent field observations that less nonlinearity exists for vertical motions. It is also shown that the possibility exists for using information on spectral ratios between the horizontal and vertical surface motions to quickly identify in situ soil behavior and liquefaction that are not readily covered by conventional field or laboratory experimentation procedures.     

Computational modeling of cyclic mobility and post-liquefaction site response

Under seismic excitation, liquefied clean medium to dense cohesionless soils may regain a high level of shear resistance at large shear strain excursions. This pattern of response, known as a form of cyclic mobility, has been documented by a large body of laboratory sample tests and centrifuge experiments. A plasticity-based constitutive model is developed with emphasis on simulating the cyclic mobility response mechanism and associated pattern of shear strain accumulation. This constitutive model is incorporated into a two-phase (solid–fluid), fully coupled finite element code. Calibration of the constitutive model is described, based on a unique set of laboratory triaxial tests (monotonic and cyclic) and dynamic centrifuge experiments. In this experimental series, Nevada sand at a relative density of about 40% is employed. The calibration effort focused on reproducing the salient characteristics of dynamic site response as dictated by the cyclic mobility mechanism. Finally, using the calibrated model, a numerical simulation is conducted to highlight the effect of excitation frequency content on post-liquefaction ground deformations.     

桥梁隔震体系振动台试验研究(III)——测试结果分析

根据前文所述的测试结果 ,本文主要分析了隔震构造、橡胶支座水平刚度、地震输入频谱特性、地震烈度、输入方向、桥墩高度、桥墩嵌固程度等因素对隔震效果的影响 ,揭示了隔震体系耗散地震能量输入的机理 ,所得出的结论对工程实践具有指导意义。     

桥梁隔震体系振动台试验研究(IV)——隔震桥梁的设计方法探讨

在前文模型试验的基础上 ,本文总结归纳了隔震桥梁的设计方法与设计流程 ,着重论述探讨了隔震桥梁的概念设计与细部构造设计应注意的问题