The snowball Earth aftermath: Exploring the limits of continental weathering processes

Carbonates capping Neoproterozoic glacial deposits contain peculiar sedimentological features and geochemical anomalies ascribed to extraordinary environmental conditions in the snowball Earth aftermath. It is commonly assumed that post-snowball climate dominated by CO₂ partial pressures several hundred times greater than modern levels, would be characterized by extreme temperatures, a vigorous hydrological cycle, and associated high continental weathering rates. However, the climate in the aftermath of a global glaciation has never been rigorously modelled. Here, we use a hierarchy of numerical models, from an atmospheric general circulation model to a mechanistic model describing continental weathering processes, to explore characteristics of the Earth system during the supergreenhouse climate following a snowball glaciation. These models suggest that the hydrological cycle intensifies only moderately in response to the elevated greenhouse. Indeed, constraints imposed by the surface energy budget sharply limit global mean evaporation once the temperature has warmed sufficiently that the evaporation approaches the total absorbed solar radiation. Even at 400 times the present day pressure of atmospheric CO₂, continental runoff is only 1.2 times the modern runoff. Under these conditions and accounting for the grinding of the continental surface by the ice sheet during the snowball event, the simulated maximum discharge of dissolved elements from continental weathering into the ocean is approximately 10 times greater than the modern flux. Consequently, it takes millions of years for the silicate weathering cycle to reduce post-snowball CO₂ levels to background Neoproterozoic levels. Regarding the origin of the cap dolostones, we show that continental weathering alone does not supply enough cations during the snowball melting phase to account for their observed volume.     

Comparison of LiDAR waveform processing methods for very shallow water bathymetry using Raman,near‐infrared and green signals

Airborne light detection and ranging (LiDAR) bathymetry appears to be a useful technology for bed topography mapping of non‐navigable areas, offering high data density and a high acquisition rate. However, few studies have focused on continental waters, in particular, on very shallow waters (<2 m) where it is difficult to extract the surface and bottom positions that are typically mixed in the green LiDAR signal. This paper proposes two new processing methods for depth extraction based on the use of different LiDAR signals [green, near‐infrared (NIR), Raman] of the SHOALS‐1000T sensor. They have been tested on a very shallow coastal area (Golfe du Morbihan, France) as an analogy to very shallow rivers. The first method is based on a combination of mathematical and heuristic methods using the green and the NIR LiDAR signals to cross validate the information delivered by each signal. The second method extracts water depths from the Raman signal using statistical methods such as principal components analysis (PCA) and classification and regression tree (CART) analysis. The obtained results are then compared to the reference depths, and the performances of the different methods, as well as their advantages/disadvantages are evaluated. The green/NIR method supplies 42% more points compared to the operator process, with an equivalent mean error (?4·2 cm verusu ?4·5 cm) and a smaller standard deviation (25·3 cm verusu 33·5 cm). The Raman processing method provides very scattered results (standard deviation of 40·3 cm) with the lowest mean error (?3·1 cm) and 40% more points. The minimum detectable depth is also improved by the two presented methods, being around 1 m for the green/NIR approach and 0·5 m for the statistical approach, compared to 1·5 m for the data processed by the operator. Despite its ability to measure other parameters like water temperature, the Raman method needed a large amount of reference data to provide reliable depth measurements, as opposed to the green/NIR method. Copyright © 2010 John Wiley & Sons, Ltd.     

An automated salt‐tracing gauge for flow‐velocity measurement

This article introduces the SVG (salt‐velocity gauge), a novel automated technique for measuring flow velocity by means of salt tracing. SVG allows a high measuring rate (up to one every 2 seconds), short control section length (down to 10 cm), high accuracy (+[sol ]?1·5 cm s^?1), and unbiased calculation of the mean velocity in experimental conditions with turbulent, supercritical flow. A few cubic centimetres of saturated salt solution (NaCl) are injected into the flow at regular time intervals using a programmable solenoid valve. The tracer successively passes two conductivity probes placed a short distance downstream. The transformation of the signal between the two probes is modelled as a one‐dimensional diffusion wave equation. Model calibration gives an estimation of the mean velocity and the diffusion for each salt plume. Two implementations of the SVG technique are described. The first was an outdoors simulated rainfall experiment in Senegal (conductivity probes at 40 cm apart, 8 Hz measurement rate, salt injections at 10 second intervals). Mean velocity was estimated to range between 0·1 and 0·3 m s^?1. The second was a laboratory‐based flume experiment (conductivity probes at 10 cm apart, 32 Hz, salt injections at 2 second intervals). Another SVG with probes at 34 cm apart was used for comparison. An acoustic Doppler velocimeter (ADV) was also used to give an independent assessment of velocity. Using the 10 cm salt gauge, estimated mean velocity ranged from 0·6 to 0·9 m s^?1 with a standard deviation of 1·5 cm s^?1. Comparisons between ADV, 10 cm SVG and 34 cm SVG were consistent and demonstrated that the salt‐tracing results were unbiased and independent of distance between probes. Most peaks were modelled with r² > 90 per cent. The SVG technology offers an alternative to the dye‐tracing technique, which has been severely criticized in the literature because of the wide interval of recommended values for the correction factor α to be applied to the timings. This article demonstrates that a fixed value of α is inappropriate, since the correction factor varies with velocity, diffusion and the length of the control section. Copyright © 2005 John Wiley & Sons, Ltd.     

Dynamique et modélisation des crues dans le bassin du Mono à Nangbéto (Togo/Bénin)

Résumé

Les inondations des dernières années en Afrique de l’Ouest rendent nécessaire la prévision hydrologique pour réduire la vulnérabilité des populations. Nous avons étudié la dynamique des crues dans le bassin du Mono en amont du barrage de Nangbéto (Togo et Bénin) par des méthodes statistiques et déterministes. L’augmentation des précipitations au cours de la décennie 1990 et la mise en eau du barrage de Nangbéto en 1988 ont modifié le régime du Mono, dont les débits d’étiages ont augmenté. Les débits entrants et sortants du barrage sont équivalents, même lors des crues. Les maximums annuels des débits entrants peuvent être modélisés par une distribution des valeurs extrêmes (GEV) de type Fréchet, tandis que ceux des débits sortants, suivent une loi GEV de type Weibull (bornée). Le mécanisme dominant de génération des crues dans le bassin est la montée progressive des eaux associée à l’augmentation de la saturation des sols. L’analyse des débits de crue entre 1988 et 2010 n’a pas montré d’augmentation de la magnitude ou de la fréquence des crues. Le modèle GR4J reproduit bien les débits de crues en période calage, mais ces critères de performance se dégradent lorsque l’on s’en éloigne. Dans ces conditions, l’utilisation de ce modèle pour évaluer les risques futurs de crues serait hasardeuse et il est nécessaire d’envisager d’autres types d’approches.     

Perspectives on present-day sea level change: a tribute to Christian le Provost

In this paper, we first discuss the controversial result of the work by Cabanes et al. (Science 294:840–842, 2001), who suggested that the rate of past century sea level rise may have been overestimated, considering the limited and heterogeneous location of historical tide gauges and the high regional variability of thermal expansion which was supposed to dominate the observed sea level. If correct, this conclusion would have solved the problem raised by the IPCC third assessment report [Church et al, Cambridge University Press, Cambridge, pp 881, 2001], namely, the factor two difference between the 20th century observed sea level rise and the computed climatic contributions. However, recent investigations based on new ocean temperature data sets indicate that thermal expansion only explains part (about 0.4 mm/year) of the 1.8 mm/year observed sea level rise of the past few decades. In fact, the Cabanes et al.’s conclusion was incorrect due to a contamination of abnormally high ocean temperature data in the Gulf Stream area that led to an overestimate of thermal expansion in this region. In this paper, we also estimate thermal expansion over the last decade (1993–2003), using a new ocean temperature and salinity database. We compare our result with three other estimates, two being based on global gridded data sets, and one based on an approach similar to that developed here. It is found that the mean rate of thermosteric sea level rise over the past decade is 1.5±0.3 mm/year, i.e. 50% of the observed 3 mm/year by satellite altimetry. For both time spans, past few decades and last decade, a contribution of 1.4 mm/year is not explained by thermal expansion, thus needs to be of water mass origin. Direct estimates of land ice melt for the recent years account for about 1 mm/year sea level rise. Thus, at least for the last decade, we have moved closer to explaining the observed rate of sea level rise than the IPCC third assessment report.     

Ekman drift and vortical structures

In this article, the authors study the influence of a constant wind on the displacement of a vortex. The well known Ekman current develops in the surface layer and is responsible for a transport perpendicular to the wind: the Ekman drift.An additional process is, however, evidenced, whose importance is as strong as the Ekman drift. There indeed exists a curl of the wind-driven acceleration along isopycnic surfaces when they are spatially variable (they enter and leave the depth where the wind stress acts), which generates potential vorticity anomalies. This diabatic effect is shown to generate potential vorticity anomalies which acts on the propagation of vortical waves and non linear vortices.It is shown that this effect drastically reduces the effect of the Ekman drift for linear waves and surface intensified vortices, while extending its effect to subsurface vortices. It also generates along wind propagation, whose sign depends on the vortex characteristics.     

Identifying parameters controlling soil delayed behaviour from laboratory and in situ pressuremeter testing

The aim of this paper is to present a methodology for identifying the soil parameters controlling the delayed behaviour from laboratory and in situ pressuremeter tests by using an elasto‐viscoplastic model (EVP‐MCC) based on Perzyna's overstress theory and on the elasto‐plastic Modified Cam Clay model. The influence of both the model parameters and the soil permeability was studied under the loading condition of pressuremeter tests by coupling the proposed model equations with Biot's consolidation theory. On the basis of the parametric study, a methodology for identifying model parameters and soil permeability by inverse analysis from three levels of constant strain rate pressuremeter tests was then proposed and applied on tests performed on natural Saint‐Herblain clay. The methodology was validated by comparing the optimized values of soil parameters and the values of the same parameters obtained from laboratory test results, and also by using the identified parameters to simulate other tests on the same samples. The analysis of the drainage condition and the strain rate effect during a pressuremeter test demonstrated the coupled influence of consolidation and viscous effects on the test results. The numerical results also showed that the inverse analysis procedure could successfully determine the parameters controlling the time‐dependent soil behaviour. Copyright © 2008 John Wiley & Sons, Ltd.     

Pliocene extensional tectonics in the Eastern Central Patagonian Cordillera: geochronological constraints and new field evidence

Recent field work and review of radiometric data obtained from Neogene lavas and plutonic rocks exposed in the Eastern Central Patagonian Cordillera (46–48ºS), which overlie subducted segments of the South Chile Ridge, suggest important Late Miocene to Pleistocene morphological changes in relation to base level variations and/or tectonic events. We present new field observations from a region south of Lago General Carrera‐Buenos Aires, between the main Cordillera and the Meseta del Lago Buenos Aires, demonstrating that normal faulting controlled valley incisions and occurred during lava emplacement at 5–4 Ma and after 3 Ma. We also show that the 12 Ma basaltic flows of the Meseta del Lago Buenos Aires (∼2000 m a.s.l.) have been subjected to deep incision, with younger lavas dated at 1.2 Ma partially filling the valleys. These incisions are thought to reflect progressive eastward tilting of the entire meseta. Our new observations, together with additional features from Central Patagonia, strongly suggest that tectonic events led to a regional widespread morphological change after 5 Ma. The coincidence in time and space between the subduction of segments of the South Chile Ridge at 6 and 3 Ma causing opening of a slab window, and strong base level variations in the studied area, suggests a cause‐and‐effect relationship. In Central Patagonia, compressional tectonics ended well before extensional events reported here. Causes of uplift and further extension are probably completely disconnected. The uplift is purely tectonic in origin and occurred prior to the subduction of the South Chile Ridge. Extension should be a consequence of this subduction.     

From whom Bells tolls: Reclassifying Bells among CR chondrites and implications for the formation conditions of CR parent bodies

The ungrouped carbonaceous chondrite (CC) Bells has long been considered petrographically similar to CM chondrites based on its matrix abundance and degree of aqueous alteration, but also shows significant isotopic affinities to CR chondrites. Its taxonomic status is thus important for clarifying the relationship of the CRHB (formerly “CR”) clan with other CCs. In this study, we measured the oxygen isotopic compositions of olivines in type I chondrules and isolated olivine grains in Bells. Bells olivines mostly have ∆¹⁷O > −4‰, similar to CR chondrites but unlike other CCs that are rich in refractory inclusions, in which chondrules are generally richer in ¹⁶O. Therefore, Bells is a CR chondrite (albeit an anomalous one), most similar to the rare, matrix-rich CRs like Al Rais. These chondrites (i) may not necessarily derive from the same primary parent body as mainstream CRs, (ii) bear witness to significant variations of the matrix/chondrule ratio within the CRHB clan, and (iii) may be a good analog for samples retrieved by the space mission OSIRIS-REx.     

Preliminary spectral characterization of snow in a high altitude tropical glacier and potential effects of impurities in snow on albedo of tropical glaciers

This paper presents some preliminary measurements of snow spectral reflectance on the tropical Bolivian Zongo glacier. Measurements show a correct agreement with theoretical spectral albedo of pure snow in the near infrared region, but lower values in the visible region (by 10–20%) probably due to aerosols contained in snow. Impurity contents ranged from 10 to 100 ppmw in one‐week‐old snow collected from the Zongo glacier, but measurements are scarce. Large amounts of snowfall partly compensate the proximity of dust sources in mid‐latitude glaciers, whereas on outer‐tropical glaciers precipitations are not abundant and are very seasonal, and sources of aerosols are proximate. Copyright © 2007 John Wiley & Sons, Ltd.