Hahajima Seamount: An enigmatic tectonic block at the junction between the Izu–Bonin and Mariana Trenches

Abstract   The Hahajima Seamount, located at the junction between the Izu–Bonin and Mariana forearc slopes, is a notable rectangular shape and consists of various kinds of rocks. An elaborated bathymetric swath mapping with geophysical measurements and dredge hauls showed the Hahajima Seamount is cut by two predominating lineaments, northeast–southwest and northwest–southeast. These lineaments are of faults based on the topographic cross-sections and a 3-D view (whale's eye view). The former lineament is parallel to the transform faults of the Parece Vela Basin, whereas the latter is parallel to the nearby transform fault on the subducting Pacific Plate. The rocks constituting the seamount are ultramafic rocks (mostly harzburgite), boninite, basalt, andesite, gabbro, breccia and sedimentary rocks, which characterize an island arc and an ocean basin. Gravity measurement and seismic reflection survey offer neither a definite gravity anomaly at the seamount nor definite internal structures beneath the seamount. A northwest–southeast-trending fault and small-scale serpentine flows were observed during submersible dives at the Hahajima Seamount. The rectangular shape, size of the seamount, various kinds of rocks and geophysical measurements strongly suggest that the Hahajima Seamount is not a simple serpentine seamount controlled by various tectonic movements, as previously believed, but a tectonic block.     

Characteristics of alkenone distributions in suspended and sinking particles in the northwestern North Pacific

We investigated alkenones recorded in suspended particles and a settling particle time series collected at three stations, 40N (40°N, 165°E), KNOT (44°N, 155°E), and 50N (50°N, 165°E), in the northwestern North Pacific from December 1997 to May 1999. Emiliania huxleyi, the most abundant alkenone producer in this area, is present in surface to subsurface (to ∼50 m depth) waters. The alkenone concentrations recorded in the suspended particles indicated that the seasonal alkenone particle distribution differed significantly interannually. Alkenone export fluxes at the three sediment-trap stations ranged from 0.16 to 49.3 μg m⁻² day⁻¹, and the maximum export flux, which occurred in summer to fall (July-November), was associated with a high organic carbon export flux. The amount of alkenone produced during the maximum export season accounted for 60-80% of the total annual amount of alkenone, and the alkenones accumulated in the sediment below the traps had characteristics corresponding to subsurface waters during the summer-autumn season. Alkenone-derived temperatures recorded in suspended particles corresponded to the in situ temperature within ∼2 °C. Although alkenone-derived temperatures corresponded approximately to the temperatures observed in the stratified subsurface waters at the three trap stations during the high-export season, large differences were observed during the low-export (winter-spring) period. For example, the alkenone-derived temperatures observed at stations KNOT and 50N were much higher than the in situ subsurface temperatures reported in the World Ocean Atlas 2001. Relatively large differences between alkenone-derived temperatures and in situ temperatures in the subarctic might be due to (1) a low-light limitation or (2) contributions of allochthonous alkenones in particulate material transported from subtropical areas within a warm-core ring.     

Irreversible thermodynamic and viscoelastic model for power-law relaxation and attenuation of rocks

A constitutive law for viscoelastic behaviour of rocks is derived from irreversible thermodynamics. To this model, two specific parameters are introduced; one is an internal state variable which is a variable concerning the microstructures such as defects in crystals or microcracks, and the other is a temperature reduced time obtained by normalizing the various temperature behaviours. A large number of internal state variables have the respective relaxation times and show the respective time evolutions, while a set of the time evolutions generates temporal power-law behaviour of rocks. The time evolutions of internal states are regarded as dynamics of elements of the generalized Maxwell model, and the stress–strain relation is represented by a response function following a temporal power-law in terms of linear system theory. This relation is inversely formulated to investigate the source field from output data. This model enables us to explain experimentally-based constitutive laws for transient and steady-state behaviour of rocks (e.g., lherzolite) following a temporal power-law and for attenuation behaviour of polycrystals (e.g., olivine) represented by a relation between the quality factor and frequency. Both laws show power-laws on deformation time or frequency depending on the fractal structure in polycrystals or rocks, and the experimental high-temperature behaviours can be extrapolated to long deformation time or high frequency behaviour.     

Discrete‐like crack simulation by smeared crack‐based FEM for reinforced concrete

A numerical process that simulates crack propagation in reinforced concrete through post‐crack stress redistribution is presented. This process is developed within the context of the smeared crack approach. Continuity and orientation of the reinforcing bar components are automatically recognized in the pre‐processing stage. The process explicitly outputs crack widths by computing the bond slips along reinforcement, without imposing any additional nodes between the reinforcement and concrete. The process is incorporated with a finite element algorithm, and the validation is investigated through sample 3D static analyses of nine concrete specimens subjected to monotonic shear and flexure loads. These specimens contain relatively well‐distributed steel bars and fiber reinforced polymer (FRP) sheets of reinforcement ratio from 0.11 to 0.57%. The analyses predict the crack patterns and crack widths well, although some disagreements are found between the test and the analysis results. The proposed process outputs discrete, continuous in crack directions, and element boundary‐free crack patterns. Copyright © 2007 John Wiley & Sons, Ltd.     

Viscosity measurements of subliquidus magmas: Alkali olivine basalt from the Higashi-Matsuura district, Southwest Japan

We carried out viscosity measurements and sampling of a crystal suspension derived from alkali olivine basalt from the Matsuura district, SW Japan, at subliquidus temperatures from 1230 °C to 1140 °C under 1 atm with NNO oxygen buffered conditions. Viscosity increased from 31 to 1235 Pa s with a decrease in temperature from 1230 to 1140 °C. On cooling, olivine first appeared at 1210 °C, followed by plagioclase at 1170 °C. The crystal content of the sample attained 31 vol.% at 1140 °C (plagioclase 22%, olivine 9%). Non-Newtonian behaviors, including thixotropy and shear thinning, were pronounced in the presence of tabular plagioclase crystals. The cause of such behavior is discussed in relation to shear-induced changes in melt–crystal textures. Relative viscosities, η_r (= η_s / η_m, where η_s and η_m are the viscosities of the suspension and the melt, respectively), were obtained by calculating melt viscosities from the melt composition and temperature at 1 atm using the equation proposed by Giordano and Dingwell [Giordano, D., Dingwell, D.B., 2003. Non-Arrhenian multicomponent melt viscosity: a model. Earth and Planetary Science Letters, 208, 337–349.]. The obtained relative viscosities are generally consistent with the Einstein–Roscoe relation, which represents η_r for suspensions that contain equant and equigranular crystals, even though the crystal suspension analyzed in the present experiments contained tabular plagioclase and granular olivine of various grain sizes. This consistency is attributed to the fact that the effect of crystal shape was counterbalanced by the effect of the dispersion of crystal size. The applicability of the Einstein–Roscoe equation with respect to crystal shape is discussed on the basis of the present experimental results. Our experiments and those of Sato [Sato, H., 2005. Viscosity measurement of subliquidus magmas: 1707 basalt of Fuji volcano. Journal of Mineralogical and Petrological Sciences, 100, 133–142.] show that the relationship between relative viscosity and crystal fraction is consistent with the Einstein–Roscoe relationship for axial ratios that are smaller than the critical value of 4–6.5, but discrepancies occur for higher ratios.     

Dynamic behaviour and identification of non-uniform ground by the discrete wave number method

Powell's method for minimizing a function of several variables without calculating derivatives is applied to recorded earthquake motion on the ground surface to identify ground characteristics that have irregular profiles. The identifications are made by designating the shear wave velocity depth and width of the irregularity of surface ground as unknown parameters and are based on the least square fit between the amplitude of the transfer function determined from accelerograms recorded at two observation sites and the corresponding transfer function calculated from the response analysis of a ground model. The discrete wave number method is used to analyze the response of ground with a non-uniform profile for the incidence of SH waves. The effect of the initial assumed values on the convergence is studied by evaluating the square error between the theoretical transfer function and that calculated from the parameters identified. The dispersive trend found for the accelerograms is explained by the calculated response of a ground model with a non-uniform profile.     

Separation and sliding between soil and structure during strong ground motion

This paper presents an approach to the problem of separation and sliding between soil and structure in the finite element analysis of dynamic soil-structure interaction problems. Joint elements are arranged along the contact surface between soil and structure and they have a property such that tensile forces are not transmitted between the planes representing structure and soil in the finite element analysis. The dynamic properties governing the sliding are determined by the Mohr-Coulomb failure law determined from the cohesion and the friction angle between soil and structure. The proposed method is applied to (i) a model of a reactor building resting on the free surface of layered ground and (ii) a buried foundation structure. The numerical computations reveal the following results: that the translation is dominant in the motion of the structure when sliding is taking place between soil and structure, and that the rocking is dominant in the rest of the response. The amplitude of the response during sliding is increased on any one point of the structure and decreased on any one point of the ground compared with that of the fixed condition at the interface. In the case of the buried structure, it is observed in the computed results that the structure and soil move in the opposite direction along the vertical contact surface and are separated from each other in the near surface region during the strong phase of the excitation.     

Mesoscale Reproducibility in Regional Ocean Modelling with a Three-Dimensional Stratification Estimate Based on Aviso-Argo Data

ABSTRACT

For dynamically consistent, high-resolution, yet cost-effective regional oceanic downscaling modelling, an empirical three-dimensional (3D) density estimate based on publicly available datasets is utilized for the Regional Oceanic Modeling System (ROMS) with simple data assimilation (i.e., TS nudging, where TS stands for temperature and salinity). We rely on a method built upon the two-layer model to reconstruct a mesoscale 3D temperature and salinity field, referred to as Tokyo University of Marine Science and Technology (TUMSAT)-TS, using near real-time altimeter-derived dynamic height along with Argo float profiling data. The TUMSAT-TS is first validated using in situ hydrographic data, then is implemented in the Japan Coastal Ocean Predictability Experiment (JCOPE2)-ROMS downscaling system for the Kuroshio region off Japan. We explore the usability of TUMSAT-TS by carrying out three comparative simulations with temperature and salinity nudging towards the (i) TUMSAT-TS and (ii) JCOPE2-TS fields, and (iii) without the nudging. Whereas the unassimilated case fails to properly account for the Kuroshio, both datasets individually are found to help reproduce the mesoscale variability of the Kuroshio, as well as its transient paths, volume transport, associated kinetic energy (KE) and eddy KE, and seasonally varying stratification.     

Vertical heat transfer based on direct microstructure measurements in the ice-free Pacific-side Arctic Ocean: the role and impact of the Pacific water intrusion

This study quantifies diapycnal mixing and vertical heat transfer in the Pacific side of the Arctic Ocean, where sea-ice cover has disappeared between July and September in the last few decades. We conducted microstructure measurements in the open water region around the Canada Basin from late summer to fall in 2009 and 2010 using R/V Mirai. In the study domain, the dissipation rate of turbulent kinetic energy, ε, is typically as low level as O(10^?10) W kg^?1, resulting in vertical heat diffusivity of O(10^?7) m² s^?1, which is close to the molecular diffusivity of heat, suggesting comparatively little predominance of mechanical turbulent mixing. An exception is the case at the Barrow Canyon, where the strong baroclinic throughflow generates substantial vertical mixing, producing ε > O(10^?7) W kg^?1, because of the shear flow instability. Meanwhile, in the confluence region, where the warm/salty Pacific water and the cold/fresh Arctic basin water encounter, the micro-temperature profiles revealed a localized enhancement in vertical diffusivity of heat, reaching O(10^?5) m² s^?1 or greater. In this region, an intrusion of warm Pacific water creates a horizontally interleaved structure, where the double-diffusive mixing facilitates vertical heat transfer between the intruding Pacific water and the surrounding basin waters.     

Validating a regional climate model’s downscaling ability for East Asian summer monsoonal interannual variability

Performance of a regional climate model (RCM), WRF, for downscaling East Asian summer season climate is investigated based on 11-summer integrations associated with different climate conditions with reanalysis data as the lateral boundary conditions. It is found that while the RCM is essentially unable to improve large-scale circulation patterns in the upper troposphere for most years, it is able to simulate better lower-level meridional moisture transport in the East Asian summer monsoon. For precipitation downscaling, the RCM produces more realistic magnitude of the interannual variation in most areas of East Asia than that in the reanalysis. Furthermore, the RCM significantly improves the spatial pattern of summer rainfall over dry inland areas and mountainous areas, such as Mongolia and the Tibetan Plateau. Meanwhile, it reduces the wet bias over southeast China. Over Mongolia, however, the performance of precipitation downscaling strongly depends on the year: the WRF is skillful for normal and wet years, but not for dry years, which suggests that land surface processes play an important role in downscaling ability. Over the dry area of North China, the WRF shows the worst performance. Additional sensitivity experiments testing land effects in downscaling suggest the initial soil moisture condition and representation of land surface processes with different schemes are sources of uncertainty for precipitation downscaling. Correction of initial soil moisture using the climatology dataset from GSWP-2 is a useful approach to robustly reducing wet bias in inland areas as well as to improve spatial distribution of precipitation. Despite the improvement on RCM downscaling, regional analyses reveal that accurate simulation of precipitation over East China, where the precipitation pattern is strongly influenced by the activity of the Meiyu/Baiu rainfall band, is difficult. Since the location of the rainfall band is closely associated with both lower-level meridional moisture transport and upper-level circulation structures, it is necessary to have realistic upper-air circulation patterns in the RCM as well as lower-level moisture transport in order to improve the circulation-associated convective rainfall band in East Asia.