Induction of tributyltin-binding protein type 2 in Japanese flounder, Paralichthys olivaceus, by exposure to tributyltin-d27

In this study, individual Japanese flounder were intraperitoneally injected with 2 μg tributyltin-d27 (TBT-d27) fish⁻¹. Blood samples were collected on day 7 after injection. TBT-binding protein types 1 and 2 (TBT-bp1, -bp2) in the blood serum were quantified by western blotting analysis. As a result, the concentration of TBT-bp2 in TBT-d27 treated group increased to 220% of that in the solvent control, whereas the TBT-bp1 concentration decreased to 65% of that in the solvent control. Additionally, a positive relationship between the concentrations of TBT-bp2 and TBT was observed in blood sera of wild and cultured flounder. We suggest that TBT-bp2 is produced in response to TBT exposure and may play an important role in fish physiology.     

A DEM-based evaluation of potential flood risk to enhance decision support system for safe evacuation

A practical, DEM-based practical method is proposed to enhance flood risk management in fluvial areas by quantifying relative risk as a function of vulnerability to inland and evacuation difficulty. Both measures are based mainly on the topography of the region, so the method does not require detailed data on the physical characteristics of the land. First, we use the deterministic 8-node method on a digital elevation map (DEM) to trace storm waterways. Second, we repeat the process on a reversed DEM to trace evacuation routes that avoid the waterways and zones dangerously close to the rivers. Finally, on the basis of such two flow lines of evacuee and storm water, we proposed the protocol to evaluate the flood risk at every point on the map taking into account both the minimum time required for floodwater to arrive and duration of an evacuation from that location. The time that must be allocated for safe evacuation is defined as the potential flood risk of evacuation (PFRE). The method is demonstrated on a fluvial area of the Kaki River in Nagaoka city, Japan. In addition, we illustrated the application of the PFRE map to divide the region into areas of greater or lesser evacuation urgency.     

Performance of dry-separation processes in the recovery of cenospheres from fly ash and their implementation in a recovery unit

Cenospheres recovery is one of the coal fly ash beneficiations, providing economic as well as environmental benefits. Current techniques, such as lagoon or other wet-separation processes, consume large amounts of water and add to water pollution due to leaching of toxic materials from fly ash. The other possible disadvantage is the need for a wide operational area, which is unsuitable for densely populated countries. As wet-separation processes have some disadvantages, an improved and/or sustainable alternative recovery technique is required. An air classifier is one of the alternative techniques. In this study, two types of air classifiers, namely a closed-type pneumatic separator and a micron separator, have been investigated. In terms of separation efficiency, it was found that the micron separator has the potential to be applied in cenospheres recovery from coal fly ash, giving a Newton's efficiency of 0.44, as compared to a value of about 0.26 for the closed-type pneumatic separator. The cenospheres recoveries of both pieces of equipment at their optimum Newton's efficiencies were similar at over 60 wt.%. The separation performance was further assessed from the particle distributions of the overflow and underflow products obtained from both pieces of equipment, as well as from SEM images. It was found that the lower Newton's efficiency of the closed-type pneumatic separator was due to the re-concentration of fine particles in the underflow product at air-flow rates higher than 2.2 m/s (the underflow product yield was about 55 wt.%).In order to further confirm the applicability of this technique, the micron separator, which had provided higher separation efficiency and cenospheres recovery, was deployed in a cenospheres recovery unit prior to the use of a wet-separation process (float and sink tank). About 80% of the cenospheres was recovered, with an 87.8% reduction in the total mass of fly ash to be separated in the float and sink tank. Consequently, much less water was needed for the process of cenospheres recovery. Moreover, it was also confirmed that the micron separator could yield higher quality fly ashes, that is, fly ash types I and II, from lower feed quality of fly ash type IV, which is the lowest category in commercial classification of fly ash according to JIS A6201.     

In situ observation of a garnet/perovskite transition in CaGeO<Subscript>3</Subscript>

We used an in situ measurement method to investigate the phase transition of CaGeO₃ polymorphs under high pressures and temperatures. A multi-anvil high-pressure apparatus combined with intense synchrotron X-ray radiation was used. The transition boundary between a garnet and a perovskite phase at T = 900–1,650 K and P = 3–8 GPa was determined as occurring at P (GPa) = 9.0−0.0023 × T (K). The transition pressure determined in our study is in general agreement with that observed in previous high-pressure experiments. The slope, dP/dT, of the transition determined in our study is consistent with that calculated from calorimetry data.     

Importance of intracellular Fe pools on growth of marine diatoms by using unialgal cultures and on the Oyashio region phytoplankton community during spring

We report on the ability for luxury Fe uptake and the potential for growth utilizing intracellular Fe pools for 4 coastal centric diatom isolates and in situ phytoplankton assemblages, mainly composed of diatoms. Iron uptake of the diatom isolates and natural phytoplankton assemblages in the Oyashio region during spring blooms were prevented by adding hydroxamate siderophore desferrioxamine B (DFB). After the addition of DFB, intracellular Fe in the diatom isolates supported 2.4–4.2 cell divisions with 1.2–2.6 Chl a doublings. The intracellular Fe was primarily used for cell generation rather than Chl a production, leading to a reduction in the Chl a cell quota in the Fe-starved cells with time. The metabolic properties of the Fe-starved cells with their cell morphologies were different among species or genera. An on-deck incubation experiment also exhibited 1.9 cell divisions and 0.81 Chl a doublings of phytoplankton after the addition of DFB, also indicating the preference of cell generation over Chl a production. A decrease in the level of cellular Chl a, a main light-harvesting pigment in Fe-starved diatoms, may become a superior survival strategy to protect the cells from high irradiance that can cause photo-oxidative damages through photosynthesis. Such relatively low-Fe with high-light conditions could often occur in surface waters of the Oyashio region from spring to summer.     

Geometry of the Nojima Fault at Nojima-Hirabayashi, Japan – II. Microstructures and their Implications for Permeability and Strength

Samples of damage-zone granodiorite and fault core from two drillholes into the active, strike-slip Nojima fault zone display microstructures and alteration features that explain their measured present-day strengths and permeabilities and provide insight on the evolution of these properties in the fault zone. The least deformed damage-zone rocks contain two sets of nearly perpendicular (60–90° angles), roughly vertical fractures that are concentrated in quartz-rich areas, with one set typically dominating over the other. With increasing intensity of deformation, which corresponds generally to increasing proximity to the core, zones of heavily fragmented rock, termed microbreccia zones, develop between prominent fractures of both sets. Granodiorite adjoining intersecting microbreccia zones in the active fault strands has been repeatedly fractured and locally brecciated, accompanied by the generation of millimeter-scale voids that are partly filled with secondary minerals. Minor shear bands overprint some of the heavily deformed areas, and small-scale shear zones form from the pairing of closely spaced shear bands. Strength and permeability measurements were made on core collected from the fault within a year after a major (Kobe) earthquake. Measured strengths of the samples decrease regularly with increasing fracturing and fragmentation, such that the gouge of the fault core and completely brecciated samples from the damage zone are the weakest. Permeability increases with increasing disruption, generally reaching a peak in heavily fractured but still more or less cohesive rock at the scale of the laboratory samples. Complete loss of cohesion, as in the gouge or the interiors of large microbreccia zones, is accompanied by a reduction of permeability by 1-2 orders of magnitude below the peak values. The core samples show abundant evidence of hydrothermal alteration and mineral precipitation. Permeability is thus expected to decrease and strength to increase somewhat in active fault strands between earthquakes, as mineral deposits progressively seal fractures and fill pore spaces.     

Newly-generated Daliangshan Fault Zone—Shortcutting on the central section of Xianshuihe-Xiaojiang fault system

The Daliangshan fault zone is the eastern branch in the central section of Xianshuihe-Xiaojiang fault system. It has been neglected for a long time, partly because of no destructive earthquake records along this fault zone. On the other hand, it is located on the remote and inaccessible plateau. So far it was excluded as part of the Xianshuihe-Xiaojiang fault system. Based on the interpretation of aerophotographs and field investigations, we document this fault zone in detail, and give an estimation of strike-slip rate about 3 mm/a in Late Quaternary together with age dating data. The results suggest that the Daliangshan fault zone is a newly-generated fault zone resulted from shortcutting in the central section of Xianshuihe-Xiaojiang fault system because of the clockwise rotation of the Southeastern Tibetan Crustal Block, which is bounded by the Xianshuihe-Xiaojiang fault system. Moreover, the shortcutting may make the Daliangshan fault zone replace the Anninghe and Zemuhe fault zones gradually, and finally, the later two fault zones will probably die out with the continuous clockwise rotation.     

Urban mapping,accuracy, & image classification: A comparison of multiple approaches in Tsukuba City,Japan

The rapid growth of urban space and its environmental challenges require precise mapping techniques to represent complex earth surface features more accurately. In this study, we examined four mapping approaches (unsupervised, supervised, fuzzy supervised and GIS post-processing) using Advanced Land Observing Satellite images to predict urban land use and land cover of Tsukuba city in Japan. Intensive fieldwork was conducted to collect ground truth data. A random stratified sampling method was chosen to generate geographic reference data for each map to assess the accuracy. The accuracies of the maps were measured, producing error matrices and Kappa indices. The GIS post-processing approach proposed in this research improved the mapping results, showing the highest overall accuracy of 89.33% as compared to other approaches. The fuzzy supervised approach yielded a better accuracy (87.67%) than the supervised and unsupervised approaches. The fuzzy supervised approach effectively dealt with the heterogeneous surface features in residential areas. This paper presents the strengths of the mapping approaches and the potentials of the sensor for mapping urban areas, which may help urban planners monitor and interpret complex urban characteristics.     

中巴地球资源卫星在辽东区域环境监测中的应用评价研究

对中巴资源一号卫星 CCD传感器接收的辽宁省营口幅数据 ,从几何精度、空间分辨率、数据噪声等方面 ,进行了图像数据质量评价 ,认为从总体上讲 ,达到了设计要求 ,具有广阔的应用前景 ,同时指出 ,CCD传感器在稳定性和同一性方面尚需改进     

西藏班戈县东嘎花岗岩体特征及锡找矿前景分析

东嘎花岗岩体位于冈底斯一念青唐古拉板片北缘、班公错一怒江结合带中段班戈一崩错板片。岩体时代为燕山晚期,属印度一欧亚板块碰撞造山构造环境。岩石属富钠、硅铝过饱和类型,该岩体位于斑戈一嘉黎一波密一察隅锡成矿远景带内,岩浆分异程度高,具有S型花岗岩体的典型特征,与滇西、川西含锡花岗岩体特征相似,成矿条件有利。区域化探资料显示锡异常明显,异常为Sn、Rb、Y、u、Nb、Ag、w、Th、Pb等多元素组合。sn元素的强度高、规模大。据区域地质、岩石化学及地球化学特征及区域成矿资料,东嘎花岗岩体具有良好的锡成矿前景。