The evolution of groundwater in the Tyrrell catchment, south-central Murray Basin, Victoria, Australia

The Tyrell catchment lies on the western margin of the Riverine Province in the south-central Murray Basin, one of Australia’s most important groundwater resources. Groundwater from the shallow, unconfined Pliocene Sands aquifer and the underlying Renmark Group aquifer is saline (total dissolved solids up to 150,000 mg/L) and is Na-Cl-Mg type. There is no systematic change in salinity along hydraulic gradients implying that the aquifers are hydraulically connected and mixing during vertical flow is important. Stable isotopes (¹⁸O+²H) and Cl/Br ratios indicate that groundwater is entirely of meteoric origin and salts in this system have largely been derived by evapotranspiration of rainfall with only minor halite dissolution, rock weathering (mainly feldspar dissolution), and ion exchange between Na and Mg on clays. Similarity in chemistry of all groundwater in the catchment implies relative consistency in processes over time, independent of any climatic variation. Groundwater in both the Pliocene Sands and Renmark Group aquifers yield ages of up to 25 ka. The Tyrrell Catchment is arid to semi-arid and has low topography. This has resulted in relatively low recharge rates and hydraulic gradients that have resulted in long groundwater residence times.     

Computer microtomography of zircon: A new approach to the selection of targets for U-Pb geochronologic studies

The paper reports results obtained by the complex studying of zircon crystals from rocks of various genesis. Zircon is one of the minerals most often used as geochronometers. It also provides genetic information on superimposed processes that is “recorded” in the external and internal morphology of its crystals. This mineral is thoroughly examined to select its unaltered crystals for U-Pb dating by the single-grain method. Zircon grains are selected with the use of optical and electron microscopy and cathodoluminescence. This publication presents the first results obtained by examining zircon by computer microtomography (μCT) and the results of the studying of the external and internal structure by conventional techniques ([optical microscopy and SEM (SE and CL)]. The paper demonstrates the advantages of the application of the μCT techniques to the selection of targets for U-Pb zircon dating: there is no need for the special preparation of the samples and no material is destructed. However, this technique may be not informative enough if the zircon contains inherited core whose density does not differ from the density of the surrounding mineral.     

Energy transfer among Pb, Ce and Mn in fluorescent calcite from Kuerle, Xinjiang, China

Natural calcite from Kuerle, Xinjiang, China, shows orange-red fluorescence when exposed to short-wave ultraviolet (UV) light (Hg 253.7 nm). Photoluminescence (PL) emission and excitation spectra of the calcite are observed at room temperature in detail. The PL emission spectrum under 208 nm excitation consists of three bands: two UV bands at 325 and 355 nm and an orange-red band at 620 nm. The three bands are ascribed to Pb²⁺, Ce³⁺ and Mn²⁺, respectively, as activators. The Pb²⁺ excitation band is observed at 243 nm, and the Ce³⁺ excitation band at 295 nm. The Pb²⁺ excitation band is also observed by monitoring the Ce³⁺ fluorescence, and the Pb²⁺ and Ce³⁺ excitation bands, in addition to six Mn²⁺ excitation bands, are also observed by monitoring the Mn²⁺ fluorescence. These indicate that four types of the energy transfer can occur in calcite through the following processes: (1) Pb²⁺ → Ce³⁺, (2) Pb²⁺ → Mn²⁺, (3) Ce³⁺ → Mn²⁺ and (4) Pb²⁺ → Ce³⁺ → Mn²⁺.     

Integrated radio luminosities of pulsars

The integrated radio luminosities of 311 long-period (P > 0.1 s) and 27 short-period (P < 0.1 s) pulsars have been calculated using a new compilation of radio spectra. The luminosities are in the range 10²⁷ ? 10³⁰ erg/s for 88% of the long-period pulsars and 10²⁸ ? 10³¹ erg/s for 88% of the short-period pulsars. We find a high correlation between the luminosity L and the estimate L ₁ = S ₄₀₀ d ² from the catalog of Taylor et al. The factor η for the transformation of the rotational energy of the neutron star into radio emission increases-decreases with increasing period for long-period and short-period pulsars. The mean value of η is ?3.73 for the long-period and ?4.85 for short-period pulsars. No dependence was found between L and the pulsar’s kinematic age t _k = |z|/〈v _z〉, where |z| and 〈v _z〉 = 300 km/s are the pulsars’ height above the plane of the Galaxy and mean velocity. A dependence of L on the rate of rotational energy losses ? was found for both groups of pulsars. It is shown that L ∝ ? ^1/3 for the entire sample. The pulsar luminosity function is constructed, and the total number and birth rate of pulsars in the Galaxy are calculated.     

A Solution to the Problem of Predicting the Suitability of Silty–clayey Materials for Cement-stabilization

Major geotechnical problems in construction involving silty–clayey soils are due to their low strength, durability and high compressibility of soft soils, and the swell–shrink nature of the overconsolidated swelling soils. Confronted with these problems, a suitable ground improvement technique is needed, for deep excavations in soft clays, for stability, durability and deformation control. Cement-stabilization is one of the alternatives. An increase in strength and durability, reduction in deformability are the main aims of this method. Conventional cement-stabilization methods are used mainly for surface treatment. However, the use of cement has recently been extended to a greater depth in which cement columns were installed to act as a type of soil reinforcement (deep cement–soil mixing and cement jet grouting). In situ engineering properties of these silty–clayey soils are often variable and difficult to predict. For this reason cement-stabilization methods have a basic target to control the aforementioned engineering properties of these clays so that the properties of a silty–clayey soil become more like the properties of a soft rock such as clayey shale or lightly cemented sandstone. So cement-stabilization of these soils is essential to control their engineering properties and to predict their engineering behaviour for construction. In an effort to predict, classify and study the suitability of silty–clayey soils for cement-stabilization both slaking and unconfined compressive strength tests were carried out on clayey–sand mixtures consisted of two types of clays, kaolin and bentonite. Finally diagrams were prepared to study the variation of slaking and strength due to compaction, curing time and cement percentage and also to predict areas of efficient cement-stabilization.     

Hydrothermal sulfide deposits of the Lucky Strike vent field, Mid-Atlantic Ridge

Several hydrothermal sulfide structures were sampled using Mir manned submersibles in the relatively shallow Lucky Strike vent field, Mid-Atlantic Ridge; the bathymetric position of these structures varies by approximately 100 m. The investigation of the chemical and mineral compositions of hydrothermal ore occurrences led to the conclusion that the initial high-temperature ore-bearing solution ascending toward the surface became unstable and experienced phase separation beneath the ocean floor. The phase separation was responsible for the bathymetric control of hydrothermal ore formation in the ocean.