Approaches to equilibrium in the distribution of trace elements among the principal minerals in a high-grade metamorphic terrane

X-ray fluorescence, instrumental neutron activation, and particle-induced X-ray emission methods were used to determine the distribution of numerous trace elements among garnet (Grt), Ca-pyroxene (Cpx), hornblende (Hbl), biotite (Bt), plagioclase (Pl) and K-feldspar (Kf) in a high-grade metamorphic terrane within the Grenville Province of the Canadian Shield. Results are presented as distribution formulae, e.g. Sr: Kf 1.1 Pl 16 Hbl 2.2 Cpx 1.0 Bt 1.2 Grt Sc: Hbl 1.1 Cpx 1.0 Grt 7.8 Bt 22 Pl 2.6 Kf V: Hbl 1.15 Bt 2.07 Cpx 6.0 Grt (1.4% CaO)>1 (Pl, Kf) Zn: Bt 1.6 Hbl 1.62 Cpx 2.9 Grt 10 Pl Ga: Bt 1.2 Hbl 1.2 Pl 2.5 Cpx 1.3 Grt where numbers are distribution ratios, e.g. ppm Sr in Hbl/ppm Sr in Cpx=2.2. Examples of inter-element similarities and differences are (a) both Rb and Cs are concentrated in biotite relative to K-feldspar, but for Rb the ratio is 2.3 and for Cs it is 16, (b) the distribution formulae for seven lanthanides are similar except for the position of garnet, e.g. Ce: Hbl 2.7 Cpx 2.8 Pl 1.1 Bt 11 Kf 16 Grt Yb: Grt 2.8 Hbl 2.7 Cpx 9 Pl 1.0 Bt 7 Kf and (c) all of Sr, eight lanthanides, Zr, V and Cr are concentrated in hornblende relative to Ca-pyroxene by a factor that lies in the narrow range of 2.2–3.1. There is a larger variation (departure from the mean) in some distribution ratios than in others. Thus the mean ratios (Hbl/Cpx) for each of six elements and in parentheses the percentage relative standard deviation are Zn 1.62 (8.6), V 2.38 (12), Cr 2.42 (18), Sr 2.7 (28), Ba 2.9 (36) and Ni 1.66 (38). We suggest that variation of this kind is the result of differences from place to place in the magnitude of deformation and recrystallization (which facilitated the rearrangement of atoms), combined with rates of lattice and crystal-boundary diffusion that are unique for the various elements, thus permitting some trace elements to approach equilibrium more closely than others.     

Quality assessment of the blue mussel (Mytilus edulis): Comparison between commercial and wild types

This study compared species identity, microplastics, chemical and microbial contamination between consumption mussels and wild type mussels, collected at Belgian department stores and Belgian groynes and quaysides, respectively. Species identification based on genetic analysis showed a high number of Mytilus (M.) edulis compared to M. galloprovincialis and M. edulis/galloprovincialis hybrid mussels. The number of total microplastics varied from 2.6 to 5.1 fibres/10 g of mussel. A higher prevalence of orange fibres at quaysides is related to fisheries activities. Chemical contamination of polycyclic aromatic hydrocarbons and polychlorobiphenyls could be related to industrial activities and water turbidity, with maximum concentrations at the quayside of port Zeebrugge. The inverse was noted for Escherichia coli contamination, which was relatively low at Zeebrugge quayside with a total count of 3.9 × 10² CFU/100 g tissue, due to limited agricultural effluents. Results of this complementary analysis stress the importance of integrated monitoring and quality assessment.     

Tree root mounds and their role in transporting soil on forested landscapes

The growth and decay of tree roots can stir and transport soil. This is one process that contributes to the mass‐movement of soil on hillslope. To explore the efficiency of this process, we document the mounding of soil beside Ponderosa and Lodgepole pine trees in the forests that dominate the mid‐elevations of Colorado's Boulder Creek watershed. Mounds are best expressed around Ponderosa pines, reaching vertical displacements above the far‐field slopes of order 10–20 cm, fading into the slope by roughly 100 cm distance from the trunks with common diameters of 30 cm. Positive mounding occurs on all sides of trees on slopes, indicating that the mounding is not attributable to deflection of a creeping flow of soil around the tree, but rather to the insertion of root volume on all sides in the subsurface. Mounding is commonly asymmetric even on cross‐slope profiles. Significant variation in the mound sizes results in no clear relationship between tree diameter and root volume displaced. These observations motivated the development of a discrete element model of tree root growth using the LIGGGHTS model, in which grains we specified to be ‘root cells’ were allowed to enlarge within the simulated granular matrix. Mounding could be reproduced, with the majority of the vertical displacement of the surface being attributable to reduction of the bulk density due to dilation of the granular matrix during root enlargement. Finally, we develop a previous analysis of the role of roots in transporting soil during growth and decay cycles. We find that even in shallow soils, the root‐cycle can drive significant soil transport down forested montane slopes. Copyright © 2013 John Wiley & Sons, Ltd.     

Mineralogy,petrology, and oxygen isotopic compositions of chondritic and achondritic lithologies in the anomalous CB carbonaceous chondrites Sierra Gorda 013 and Fountain Hills

The CB (Bencubbin-like) metal-rich carbonaceous chondrites are subdivided into the CB_a and CB_b subgroups. The CB_a chondrites are composed predominantly of ~cm-sized skeletal olivine chondrules and unzoned Fe,Ni-metal ± troilite nodules. The CB_b chondrites are finer grained than the CB_as and consist of chemically zoned and unzoned Fe,Ni-metal grains, Fe,Ni-metal ± troilite nodules, cryptocrystalline and skeletal olivine chondrules, and rare refractory inclusions. Both subgroups contain exceptionally rare porphyritic chondrules and no interchondrule fine-grained matrix, and are interpreted as the products of a gas–melt impact plume formed by a high-velocity collision between differentiated planetesimals about 4562 Ma. The anomalous metal-rich carbonaceous chondrites, Fountain Hills and Sierra Gorda 013 (SG 013), have bulk oxygen isotopic compositions similar to those of other CBs but contain coarse-grained igneous clasts/porphyritic chondrule-like objects composed of olivine, low-Ca-pyroxene, and minor plagioclase and high-Ca pyroxene as well as barred olivine and skeletal olivine chondrules. Cryptocrystalline chondrules, zoned Fe,Ni-metal grains, and interchondrule fine-grained matrix are absent. In SG 013, Fe,Ni-metal (~80 vol%) occurs as several mm-sized nodules; magnesiochromite (Mg-chromite) is accessory; daubréelite and schreibersite are minor; troilite is absent. In Fountain Hills, Fe,Ni-metal (~25 vol%) is dispersed between chondrules and silicate clasts; chromite and sulfides are absent. In addition to a dominant chondritic lithology, SG 013 contains a chondrule-free lithology composed of Fe,Ni-metal nodules (~25 vol%), coarse-grained olivine and low-Ca pyroxene, interstitial high-Ca pyroxene and anorthitic plagioclase, and Mg-chromite. Here, we report on oxygen isotopic compositions of olivine, low-Ca pyroxene, and ±Mg-chromite in Fountain Hills and both lithologies of SG 013 measured in situ using an ion microprobe. Oxygen isotope compositions of olivine, low-Ca pyroxene, and Mg-chromite in these meteorites are similar to those of magnesian non-porphyritic chondrules in CB_a and CB_b chondrites: on a three-isotope oxygen diagram (δ¹⁷O vs. δ¹⁸O), they plot close to a slope-1 (primitive chondrule mineral) line and have a very narrow range of Δ¹⁷O (=δ¹⁷O–0.52 × δ¹⁸O) values, −2.5 ± 0.9‰ (avr ± 2SD). No isotopically distinct relict grains have been identified in porphyritic chondrule-like objects. We suggest that magnesian non-porphyritic (barred olivine, skeletal olivine, cryptocrystalline) chondrules in the CB_as, CB_bs, and porphyritic chondrule-like objects in SG 013 and Fountain Hills formed in different zones of the CB impact plume characterized by variable pressure, temperature, cooling rates, and redox conditions. The achondritic lithology in SG 013 represents fragments of one of the colliding bodies and therefore one of the CB chondrule precursors. Fountain Hills was subsequently modified by impact melting; Fe,Ni-metal and sulfides were partially lost during this process.     

The Elastic Strain Energy of Damaged Solids with Applications to Non-Linear Deformation of Crystalline Rocks

Laboratory and field data indicate that rocks subjected to sufficiently high loads clearly deviate from linear behavior. Non-linear stress–strain relations can be approximated by including third and higher-order terms of the strain tensor in the elastic energy expression (e.g., the Murnaghan model). Such classical non-linear models are successful for calculating deformation of soft materials, for example graphite, but cannot explain with the same elastic moduli small and large non-linear deformation of stiff rocks, such as granite. The values of the third (higher-order) Murnaghan moduli estimated from acoustic experiments are one to two orders of magnitude above the values estimated from stress–strain relations in quasi-static rock-mechanics experiments. The Murnaghan model also fails to reproduce an abrupt change in the elastic moduli upon stress reversal from compression to tension, observed in laboratory experiments with rocks, concrete, and composite brittle material samples, and it predicts macroscopic failure at stress levels lower than observations associated with granite. An alternative energy function based on second-order dependency on the strain tensor, as in the Hookean framework, but with an additional non-analytical term, can account for the abrupt change in the effective elastic moduli upon stress reversal, and extended pre-yielding deformation regime with one set of elastic moduli. We show that the non-analytical second-order model is a generalization of other non-classical non-linear models, for example “bi-linear”, “clapping non-linearity”, and “unilateral damage” models. These models were designed to explain the abrupt changes of elastic moduli and non-linearity of stiff rocks under small strains. The present model produces dilation under shear loading and other non-linear deformation features of the stiff rocks mentioned above, and extends the results to account for gradual closure of an arbitrary distribution of initial cracks. The results provide a quantitative framework that can be used to model simultaneously, with a small number of coefficients, multiple observed aspects of non-linear deformation of stiff rocks. These include, in addition to the features mentioned above, stress-induced anisotropy and non-linear effects in resonance experiments with damaged materials.     

Grazing response in the vegetation communities of the Kamiesberg, South Africa: Adopting a plant functional type approach

Potential grazing impacts associated with the sustained heavy grazing of a communal rangeland are explored through a plant functional type approach. An informative typology is derived that shows grazing responses. An examination of plant functional types within growth forms does not provide any additional insights, whereas looking at traits alone does demonstrate a grazing response with increases in the traits of large basal and erect leafy growth forms and losses in the traits of medium height, simple leaves and few flowers. There is also evidence of a biogeographic shift, with an increase in a succulent-dominated plant functional type at higher altitudes on the heavily grazed communal rangeland. This is attributed to the fact that in adopting the proposed universal language advocated by plant functional type practitioners some of the subtleties of this particular vegetation type are lost. For example growth form height classes are too coarse for the shorter vegetation of the Succulent Karoo. In the resultant ‘fuzzy’ groups, responses are lost. While the method adopted is informative a stronger case is made for a more simple growth form analysis traditionally adopted in rangeland analysis.     

Triple-frequency GPS precise point positioning with rapid ambiguity resolution

At present, reliable ambiguity resolution in real-time GPS precise point positioning (PPP) can only be achieved after an initial observation period of a few tens of minutes. In this study, we propose a method where the incoming triple-frequency GPS signals are exploited to enable rapid convergences to ambiguity-fixed solutions in real-time PPP. Specifically, extra-wide-lane ambiguity resolution can be first achieved almost instantaneously with the Melbourne-Wübbena combination observable on L2 and L5. Then the resultant unambiguous extra-wide-lane carrier-phase is combined with the wide-lane carrier-phase on L1 and L2 to form an ionosphere-free observable with a wavelength of about 3.4 m. Although the noise of this observable is around 100 times the raw carrier-phase noise, its wide-lane ambiguity can still be resolved very efficiently, and the resultant ambiguity-fixed observable can assist much better than pseudorange in speeding up succeeding narrow-lane ambiguity resolution. To validate this method, we use an advanced hardware simulator to generate triple-frequency signals and a high-grade receiver to collect 1-Hz data. When the carrier-phase precisions on L1, L2 and L5 are as poor as 1.5, 6.3 and 1.5 mm, respectively, wide-lane ambiguity resolution can still reach a correctness rate of over 99 % within 20 s. As a result, the correctness rate of narrow-lane ambiguity resolution achieves 99 % within 65 s, in contrast to only 64 % within 150 s in dual-frequency PPP. In addition, we also simulate a multipath-contaminated data set and introduce new ambiguities for all satellites every 120 s. We find that when multipath effects are strong, ambiguity-fixed solutions are achieved at 78 % of all epochs in triple-frequency PPP whilst almost no ambiguities are resolved in dual-frequency PPP. Therefore, we demonstrate that triple-frequency PPP has the potential to achieve ambiguity-fixed solutions within a few minutes, or even shorter if raw carrier-phase precisions are around 1 mm. In either case, we conclude that the efficiency of ambiguity resolution in triple-frequency PPP is much higher than that in dual-frequency PPP.