Processes of initial collision and suturing between India and Asia

The initial collision between Indian and Asian continents marked the starting point for transformation of land-sea thermal contrast, uplift of the Tibet-Himalaya orogen, and climate change in Asia. In this paper, we review the published literatures from the past 30 years in order to draw consensus on the processes of initial collision and suturing that took place between the Indian and Asian plates. Following a comparison of the different methods that have been used to constrain the initial timing of collision, we propose that the tectono-sedimentary response in the peripheral foreland basin provides the most sensitive index of this event, and that paleomagnetism presents independent evidence as an alternative, reliable, and quantitative research method. In contrast to previous studies that have suggested collision between India and Asia started in Pakistan between ca. 55 Ma and 50 Ma and progressively closed eastwards, more recent researches have indicated that this major event first occurred in the center of the Yarlung Tsangpo suture zone (YTSZ) between ca. 65 Ma and 63 Ma and then spreading both eastwards and westwards. While continental collision is a complicated process, including the processes of deformation, sedimentation, metamorphism, and magmatism, different researchers have tended to define the nature of this event based on their own understanding, an intuitive bias that has meant that its initial timing has remained controversial for decades. Here, we recommend the use of reconstructions of each geological event within the orogenic evolution sequence as this will allow interpretation of collision timing on the basis of multidisciplinary methods.     

在我国东部沿海修建地下水封石洞油库若干问题的探讨

随着我国大陆架油、气田不断被发掘、开采,石油储运问题已指日可待。我国海岸线的基岩岸约占全长的2/3以上,其中,块状结晶岩体又占基岩岸的一半以上,这就给水封油库的布置提供了良好的基础。在油库的选择和兴建中,应加强对建库岩体和主要结构面、地应力及其分布的充分研究,以期能对洞库稳定问题、地下水位及水量的合理确定问题有所裨盖、     

钢筋混凝土框架结构耗能分析

本文从能量的观点,利用CANNY程序对普通钢筋混凝土框架结构进行了分析.通过对3种不同框架结构在不同地震动(31条)输入下的能量反应分析,研究了滞回耗能及阻尼耗能与总输入能的关系.针对本文模型的计算结果,给出了滞回耗能与总输入能关系的表达式,并初步探讨了其影响系数.研究表明,滞回耗能及阻尼耗能与总输入能之间有良好的线性关系.     

平湖油气田凝析油回注油藏对开发效果影响机理研究

凝析油回注油藏是平湖油气田开发过程中为应对海底输油管线而采取的一种工程应急措施。凝析油回注油藏会引起油层内流体渗流特征的变化，并进而影响油井恢复生产后的开发指标。从室内物理模拟实验和油藏数值模拟两方面开展凝析油回注油藏的影响效果分析，并根据研究结果提出合理的回注方式，不仅从机理上为解决海上油气田开发工程中所遇类似突发事件的处理提供了依据，而且在物理模拟实验和油藏数值模拟研究相结合对油藏基础研究方面提供一些重要的结论。     

巴音布鲁克高寒区气象观测分析

本文通过2011-2013年中天山高寒无人区自建的自动气象站获取的稀缺气象资料,客观地揭示了观测区域的气象条件,给出部分气象特征参数变化特征,为中天山高山达坂区气象观测研究工作奠定一定基础,并得出如下结果：（1）迎风坡盛行风向SE、N,SE占35%,N占25%,N向风力集中4级以下,SE明显偏大,3级风比重15%,4级风比重7%,5级风比重4%;6级风比重1%,6级以上的风力几乎为零。背风坡主导风向角度范围在247.5°-337.5°,风力基本在6级以下,6级及以上风力出现概率不足1%。3-5级风占的比重较大。（2）日平均气温≤-10℃日数所占观测总日数的百分比,其值分别为：0.0%（恰西）、44.5%（江不肯达坂）、9.8%（江巴口子）、15.1%（铁力买提达坂）。恰西、江不肯达坂、江巴口子、铁力买提达坂4站日平均相对湿度≥80%的频率分别为5.9%、18.4%、16.1%和22.6%。（3）换算得出恰西、江不肯达坂、江巴口子、铁力买提达坂观测期间10m高度最大瞬时风速与小时平均风速分别为33.8/27.9m/s、41.0/27.3 m/s、25.7/17.7m/s、34.0/17.2 m/s。     

青海东昆仑哈陇休玛钼多金属矿床成矿流体特征及成矿模式

哈陇休玛钼多金属矿床是东昆仑成矿带东段目前仅有的中型斑岩型矿床。为了查明其成矿流体性质及成矿物质来源,构建矿床成矿模式,本文进行了详细的流体包裹体和H-O-S同位素研究。流体包裹体显微测温显示,哈陇休玛矿床发育气液两相和含CO₂三相两种类型包裹体,成矿流体呈现中高温(集中于280～340℃)、高盐度(w(NaCl),集中于6.00%～18.00%)和中等密度(集中于0.64～0.92 g/cm³)特点,成矿深度为2.4～4.1 km,形成于中浅成环境。H-O同位素显示,成矿流体具有岩浆水和大气降水混合的特征,但主体以岩浆水为主;S同位素显示,成矿物质主要来自于深部岩浆。结合区域构造演化认为,哈陇休玛矿床成矿模式为印支晚期东昆仑地区发生强烈壳幔混合作用,形成富含成矿元素的混合岩浆,含矿流体在随混合岩浆上升的过程中发生流体沸腾,并与大气降水混合冷却,导致成矿物理化学条件发生变化,促使成矿物质沉淀成矿。     

南海夏季风爆发日期和强度的短期气候预测方法研究

利用合成及相关统计方法，研究冬季南海季风指数与850hPa风场、500hPa高度、海表温度、OLR等环境场的相互关系及其影响南海夏季风活动的可能机制。指出冬季南海季风指数及环境场的异常特征可以作为预测南海夏季风活动的前兆信号。在此基础上建立了预测南海夏季风爆发日期和强度的概念模型，1998－2001年的预测试验取得了较好成绩。     

桶形基础沉贯室内模型试验研究

桶形基础采用负压沉贯法施工,其贯入阻力与压桩,打桩等施工方法显著不同。本文介绍了在粉土和粉质粘土地层中的一组模型试验情况,认为负压法施工可显著降低粉土的抗贯阻力,但在粉质粘土中减阻效果不明显。     

Cosmic‐ray rejection for single spectroscopic CCD images by means of template matching

This article describes a novel algorithm for cosmic‐ray rejection in single spectroscopic CCD images. This algorithm is based on a variation of template matching. It focuses on identifying those pixels belong to spectra, while other conventional algorithms tried to locate the cosmic‐ray hits directly. The main principle is applying template matching to find suspicious blocks, which is followed by surface patching to locate the legitimate pixels accurately. Therefore, the rest pixels are the ones corrupted by cosmic‐ray hits. Meanwhile, almost all the parameters are automatically extracted from the images. Examples of its performance are given for both simulated and observed images. It shows an advantage of significantly low false alarm rate with relatively high detection rate (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Tests and applications of an approach to absorbing reflected waves towards incident boundary

If the upstream boundary conditions are prescribed based on the incident wave only, the time-dependent numerical models cannot effectively simulate the wave field when the physical or spurious reflected waves become significant. This paper describes carefully an approach to specifying the incident wave boundary conditions combined with a set sponge layer to absorb the reflected waves towards the incident boundary. Incorporated into a time-dependent numerical model, whose governing equations are the Boussinesq-type ones, the effectiveness of the approach is studied in detail. The general boundary conditions, describing the down-wave boundary conditions are also generalized to the case of random waves. The numerical model is in detail examined. The test cases include both the normal one-dimensional incident regular or random waves and the two-dimensional oblique incident regular waves. The calculated results show that the present approach is effective on damping the reflected waves towards the incident wave boundary.