Simultaneous volume measurements of post-perovskite and perovskite in MgSiO3 and their thermal equations of state

Simultaneous volume measurements of MgSiO₃ post-perovskite (PPv) and perovskite (Pv) were performed in a diamond anvil cell (DAC) combined with synchrotron X-rays. An externally-heated DAC was used in addition to a laser-heated DAC for the volume measurement experiment at high temperatures. The volume data were collected in the stability field of post-perovskite from 115 to 130 GPa. The temperature generated in the externally-heated and the laser-heated DACs for the volume measurement were up to 832 and 2330 K, respectively. Using two different but complementary heating techniques, we collected the data at a wide temperature range from 300 to 2330 K. The obtained P-V-T data for PPv and Pv were fitted to a third-ordered Birch-Murnaghan equation of state (EOS). For a precise comparison of the volume between the two phases, the EOSs were constructed based on the same pressure scale of MgO. The simultaneous volume measurements and the volumes calculated from the determined EOSs demonstrate that the volume difference between PPv and Pv of about 1.5% is almost constant with increasing temperature to 4000 K at the transition. At the base of the mantle, this density difference corresponds to a temperature anomaly of 1300 K without the phase transition due to the very small thermal expansivity of minerals, which has a significant effect on mantle dynamics. The thermal expansivity contrast between the top and the bottom of the mantle is a factor of 3.6. From a mantle convection study, this value suggests that huge and hot plumes are formed at the core–mantle boundary.     

Elasticity of MgO to 130 GPa: Implications for lower mantle mineralogy

The aggregate shear wave velocities of MgO (periclase) have been determined throughout Earth's lower mantle pressure regime approaching 130 GPa using Brillouin spectroscopy in conjunction with synchrotron X-ray diffraction technique in a diamond anvil cell apparatus. We found that the extrapolations of the high-pressure shear wave velocities and shear moduli to ambient pressure are highly consistent with earlier studies. However, the measurements over a wide pressure range revealed that the pressure derivative of the shear modulus (dG/dP = G₀′) of MgO is 1.92(2), which is distinctly lower than that of previous lower-pressure experiments. Compared with the previous results on (Mg,Fe)O ferropericlase, there is no clear correlation between iron content and G₀′. We calculate that the shear wave velocity profile of lower mantle along the adiabatic geotherm applied by the lower G₀′ value of periclase can remarkably well reproduce the global seismological 1-D velocity profile model with uniform composition model. The best-fitting result indicates the possibility of a lower mantle mineralogy with ~ 92 vol.% silicate perovskite phase, implying that the bulk composition of lower mantle is likely not to be pyrolitic but more chondritic. The present acoustic measurements performed over the large pressure range have thus led us to a better understanding of compositional model of the Earth's lower mantle.     

Electrical resistivity of fcc phase iron hydrides at high pressures and temperatures

We measured the electrical resistivity of face-centered-cubic (fcc) structured iron hydrides at high pressures up to 65 GPa and high temperatures in a laser-heated diamond anvil cell. The results indicate that the resistivity of stoichiometric fcc FeH_x (x ～ 1.0) is smaller than that of fcc Fe at the same pressure and temperature conditions. The same behavior was also observed in fcc FeNiH_x (x ～ 1.0). On the other hand, hydrogen-poor fcc FeH_x (x < 0.77) showed a resistivity comparable to that of the fcc phase of pure iron. Therefore, we conclude that the stoichiometric fcc Fe (–Ni) hydride is more conductive than Fe (–Ni) with the same crystal symmetry, and the impurity resistivity of hydrogen in Fe is vanishingly small. Even if hydrogen is the major light element in the Earth's core, it would have little influence on the electrical and thermal conductivity of Fe–Ni alloys, and hence the thermal evolution of the core.     

Evaluation of slope stability by finite element method using observed displacement of landslide

To monitor land deformation in detail, we ran a large-scale field test in which an artificial landslide was induced by the application of a load to a natural slope. The measured landslide displacement was reproduced numerically through the use of finite element model analysis with a two-dimensional elasto-viscoplastic model. The analysis suggested that the strength of the sliding surface decreased as the landslide mass moved. We propose a simple method for estimating safety factors. The method involves back-calculation of shear strength parameters through reproduction of observed landslide displacements and calculating the ratio of driving force to resisting force acting on the sliding surface as modeled by joint elements. This ratio, the “stability index”, shows the same trend as safety factors calculated by a two-dimensional limit equilibrium method and a shear strength reduction method that use back-calculated shear strength parameters estimated from the limit equilibrium state. The results indicate that the stability index may be applicable to the assessment of slope stability.     

RXTE observation of NGC 6240: a search for the obscured active nucleus

We present new data taken at 850 μm with SCUBA at the James Clerk Maxwell Telescope for a sample of 19 luminous infrared galaxies. Fourteen galaxies were detected. We have used these data, together with fluxes at 25, 60 and 100 μm from IRAS , to model the dust emission. We find that the emission from most galaxies can be described by an optically thin, single temperature dust model with an exponent of the dust extinction coefficient ( k _λ ∝ λ ^{− β} ) of β ≃1.4–2. A lower β ≃1 is required to model the dust emission from two of the galaxies, Arp 220 and NGC 4418. We discuss various possibilities for this difference and conclude that the most likely is a high dust opacity. In addition, we compare the molecular gas mass derived from the dust emission, M _850 μm, with the molecular gas mass derived from the CO emission, M _CO, and find that M _CO is on average a factor 2–3 higher than M _850 μm.     

Compositional relations of pyroxenes in a ferrogabbro from Beaver Bay intrusion,Minnesota

Four different types of pyroxene found in a Beaver Bay ferrogabbro were analysed by microprobe. The crystallization sequence of pyroxene is augite-ferroaugite with exsolution lamellae of Ca-poor clinopyroxene → ferropigeonite with exsolution lamellae of augite → ferrohypersthene without exsolution lamellae+augite and ferroaugite without exsolution lamellae. The core of augite-ferroaugite with exsolution lamellae is cumulus pyroxene, whereas others, including the margin of augite-ferroaugite with lamellae, are interpreted to have crystallized from the intercumulus liquid. The sequence of crystallization of minerals from intercumulus liquid is different from that of minerals which have accumulated successively to the bottom and which were related to the fractionation of the whole layered series. The difference may be attributed to the different oxidation state of crystallization.     

Kinetics of nitrogen- or phosphorus-limited growth and effects of growth conditions on nutrient uptake inChattonella antiqua

Chattonella antiqua was grown in a nitrogen- or phosphorus-limited semicontinuous culture system. Using the cells in steady growth state, the relationship between growth rate and cell quota and effects of growth conditions on nitrate, ammonium and phosphate uptake were examined. Under nitrogen-limited conditions, growth rate as a function of nitrogen cell quota followed the empirical Droop equation and the uptake of nitrate and ammonium was not significantly affected by growth rate. Similarly, under phosphorus-limited conditions, the growth rate as a function of phosphorus cell quota also followed the Droop equation and phosphate uptake was not significantly affected by growth rate.Combining the results obtained in the present study with those from previous studies on nutrient uptake, half saturation constants for growth (K _g ) were calculated for nitrate, ammonium and phosphate. Comparisons ofK _g with nutrient concentrations in the Seto Inland Sea in summer, where red tides ofC. antiqua often occur, suggest that phosphate is one of the controlling factors for the population ofC. antiqua.     

The changing iconography of Japanese political geography

Our world is very fluid, very complex, constantly moving, made up of a great number of interdependent components. Therefore, the locus and the orbit of a particular area play an important role in geography and in politics. The purpose of this study is to examine the iconography of orbit and freedom of movement through an analysis of the transformation of the international politico-economic structure and its impact on Japan and to make clear the footsteps of Jean Gottmann on political geography. Due to its locus being on the crossroad of international power struggles, Japan had accepted different iconographies of orbits every time she faced great mutation in her history. This, in turn, accelerated the synchronism, synergism and synthesis of different iconographies that came to converge at the crossroad. The integration of imported cultures with the Japanese traditional culture promoted the transformation of Japanese society and community to emphasize the freedom of movements. The flexibility of Japanese society and the unifying iconography of Japanese community have enabled Japan to adapt and readapt to changing politico-economic phases. Interested in the relationship between freedom of movement and iconography, Jean Gottmann spent a considerable portion of his academic life inquiring into the changing dynamics of Japanese iconography on the global scene. After a quarter-century pursuit, he contributed to the establishment of political geography in Japan.     

Concept and performance testing of a high‐capacity oil damper comprising multiple damper units

There has been a significant increase in the size of building structures in recent years. Huge structures such as high‐rise buildings and large‐domed stadiums require high‐performance structural control, including the use of high‐capacity dampers, especially in an earthquake‐prone country like Japan. The objective of the present study was the enhancement of both human and structural safety in such structures through the development of a rate‐dependent type of damper with a high damping capacity. Among the various available types of rate‐dependent dampers, the authors focused on the oil damper owing to its stable performance against long‐duration vibrations. The target maximum damping force was 6000 kN, which is higher than that of any existing oil damper utilized in building structures. The authors developed a novel concept for achieving this high capacity while maintaining the size of the damper within acceptable dimensions from an architectural point of view. The concept involves the use of multiple damper units that produce mechanically parallel damping forces spatially arranged in series. As a prototype, a 1500‐kN oil damper was fabricated by combining three 500‐kN dampers. The 1500‐kN prototype damper was conceived as a full‐scale prototype of a damper that is more slender than comparable commercially available dampers in Japan, and as a scaled model of the proposed 6000‐kN damper. Sinusoidal loading tests were conducted on the prototype damper using a frequency range of 0.1–1.5 Hz and a velocity range of 0.4–300 mm/s. The results confirmed that the damper produced the design damping forces. The results of earthquake loading tests also revealed that the damper exerted a stable damping force against a large earthquake and maintained its performance after the earthquake. The damper is particularly effective against earthquakes with long‐period components that could increase the temperature of a damper. This is afforded by its high heat capacity compared to conventional dampers. Considering that the proposed 6000‐kN damper will generate a damping force that is about 2–3 times that of the strongest conventional oil damper, existing manufacturer test machines would be inadequate for evaluating its full performance characteristics. To address this issue, the authors also propose a test method for evaluating the overall damping force. The method is premised on the fact that the characteristic feature of the proposed damper is its combination of multiple damper units. The overall performance is thus evaluated using the test results for the individual damper units while the other dampers are bypassed. This method was verified by the results of the abovementioned sinusoidal loading tests, with the error for the 1500‐kN prototype damper found to be less than 5%. Copyright © 2016 John Wiley & Sons, Ltd.